Drucken

Proline

Proline

Anzeige pro Seite
Sortieren nach
1 - 50 von 728 Ergebnissen
Artikel-Nr.: PL-3336-00
The Jeep® Wrangler Unlimited Rubicon body. Rugged, tough and soon to be classic styling are now available from Pro-Line for 1:10 Scale Builders and Rock Crawler owners.The Jeep® Wrangler Unlimited Rubicon is one of the first RC bodies to offer innovative hi-detail features such as front and rear bumpers and taillight lenses that are easily attached with double stick tape or hardware of your choice. It's Jeep® styling is a perfect match to it's full size counterpart that made it an automotive classic.

Made from super strong lexan material, the Jeep® Wrangler Unlimited Rubicon is ready for off-roading in a dirt field or rock mountain near you.

Features:

•Made with Genuine GE Lexan®
•Fits 12.3" Wheelbase Rigs
•Classic body lines
•Paint then peel overspray film, sticker sheet,and window masks included
•** Double sided servo tape needed to install bumpers ** NOT INCLUDED
•* Extended rear body post are required ** NOT INCLUDED
When mounting on an Axial SCX10, Axial's AX80031 body post is required.
What's Included:

•Clear Jeep® Wrangler Unlimited Rubicon Body
•Jeep® Wrangler Unlimited Rubicon decal sheet
•Window mask included
•Paint-then-peel overspray film included
statt UVP des Herstellers 49,95 €
44,96
Sie sparen 4,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3238-63
DescriptionThis is a VW Full Fender Baja Bug Clear Body. The Baja Bug is officially licensed by Volkswagen back with the same style, quality, and features as it had the first time around and now a full fender version for SC. When you're looking to outfit your Slash 2WD or Slash 4x4 truck with the coolest, most durable, long-lasting body shells, then check out Pro-Line's complete line of Volkswagen Baja Bug bodies.

Features:

•Made from durable/genuine .040 Lexan
•Classic VW bug styling with Baja flair
•Simulated rear engine detail just like the stock motor
•Achieve a new look with optional add on spoiler
•Detail decal sheet with genuine Pro-Line'sponsors
•Paint-then-peel overspray film included
•Officially licensed by Volkswagen

Special Instructions:
•Side bars will need to be removed if you want to run the Baja Bug Body
•Tape inside of body at chassis sides to better protect against paint damage
•Shown without rear bumper. The rear bumper is accepted but part of engine detail will need to be removed to clear the mounts.
What's Included:

•Clear VW Baja Body
•Spoiler (molded into the lexan)
•Spoiler mounting hardware
•Decal Sheet
•Window Mask
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3348-00
Ford® trademarks used under license to Pro-Line.
Stampede® is a registered trademarks of Traxxas® L.P.
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.
Click Here for painting tipsThis is a Pro-Line Ford® F-150 SVT Raptor Clear Body for the Stampede® and Stampede® 4X4. The full-size Ford® Raptor SVT was designed for serious off-road abuse and now you can give your truck the same look! The Raptor has a bold grill that tells everyone to get out of your way and hood fins that prove it is a serious racing truck. Every detail of this modern icon was re-created to give your truck the ultimate in off-road styling. When you see your Raptor SVT mounted on your monster truck, you will realize that this is exactly what you have been waiting for. Buckle-up and hold on for Pro-Line’s Ford® F-150 SVT Raptor Clear Body for the Stampede® and Stampede® 4X4!

Don’t forget to submit your finished Pro-Line Ford® F-150 SVT Raptor truck to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Features:

* Made with Genuine GE .060 Lexan®
* Perfect fit and proportions for the Stampede® and Stampede® 4X4
* Bold Ford® F-150 SVT Raptor styling – Stand out among the crowd
* Exceptional detail – From far away or close up, you and your friends will be able to see the detail
* Paint then peel overspray film, sticker sheet, and window masks included
* Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Ford® F-150 SVT Raptor onto your Stampede® and Stampede® 4X4
* Made in the USA, since 1982 – Read about Pro-Line Racing’s History

Fits:

* Traxxas® Stampede®
* Traxxas® Stampede® 4X4

What's Included:

* Clear Ford® F-150 SVT Raptor body
* Window templates
* Decal Sheet
statt UVP des Herstellers 31,95 €
27,49
Sie sparen 4,46 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-1526-00
After receiving many requests, PROTOform is proud to release it's rendition of the 1971 Trans-Am Championship winning car. The addition of the J71 to the VTA scene will surely add new excitement and drama to an already diverse class of racing.The J71 features all the unique styling cues of the original car as well as is a molded in rear spoiler. The front of the car features an add-on nose with air dam. When mounted with shoo goo and 2mm screws it becomes an integral part of the body. Because this area of a racebody is the most prone to racing wear and tear, a second nose is supplied with the body. This configuration allows for molding a lightweight, durable .030 lexan body, which in turn aids the handling ability of any VTA chassis.

The VTA class has already proven that it's loved by all. The PROTOform J71 will hopefully make it even more colorful!

statt UVP des Herstellers 34,95 €
31,45
Sie sparen 3,50 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3360-00
This is a Ford® F-150 SVT Raptor Clear body for 1:16 E-REVO®. The full-size Ford® Raptor SVT was designed for serious off-road abuse and now you can give your 1:16 E-REVO® the same look! The Raptor has a bold grill that tells everyone to get out of your way and hood fins that prove it is a serious racing truck. Every detail of this modern icon was re-created to give your truck the ultimate in off-road styling. When you see your Ford Raptor F-150 SVT mounted on your 1:16 E-REVO® you will realize that this is exactly what you have been waiting for. Buckle-up and hold on for Pro-Line's Ford® F-150 SVT Raptor Clear Body for the 1:16 E-REVO®!Don’t forget to submit your finished Pro-Line Ford® F-150 SVT Raptor to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

statt UVP des Herstellers 31,95 €
28,75
Sie sparen 3,20 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-3366-00
for Slash, Slash 4x4, SC10, XXX-SCT, Ten-SCTE, Ultima SC & BlitzThis is a Pro-Line Flo-Tek Ford® F-150 Raptor SVT Clear Body for Short Course Trucks. Are you a die-hard Ford® fan who needs the benefit of Flo-Tek technology to make that huge triple without blowing over? Now you can have the newest in race body styling technology and show off your love for Ford® with Pro-Line's new Flo-Tek Ford® F-150 Raptor SVT body for short course trucks. This body features ultra-low, sleek body lines and distinctive Ford® details blended with Flo-Tek technology that will make your SC truck look good going around the track. All Ford® fans need Pro-Line's new Flo-Tek Ford® F-150 Raptor SVT Clear Body!!!

Bold Ford® F-150 Raptor SVT styling
Flo-Tek technology specifically designed to minimize parachute effect
Bolt on modular number and side dam plates
Exceptional detail and style
Made with Crystal Clear Genuine GE Lexan®
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Ford® F-150 Raptor SVT onto your Short-Course Truck

enthält:
Flo-Tek Ford® F-150 Raptor SVT Body (1 pc) unlackiert
Number and side dam plates (4 pcs)
Aluminum Hardware Packs
Window templates
Decal Sheet

passt bei:
Traxxas® Slash
Traxxas® Slash 4x4 [shown]
Associated SC10
Associated SC10 4x4
Losi XXX-SCT
Losi TEN-SCTE 4WD
HPI Blitz
Ultima SC


statt UVP des Herstellers 45,95 €
41,35
Sie sparen 4,60 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-1530-25
statt UVP des Herstellers 41,95 €
37,76
Sie sparen 4,19 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3357-00
This is the Chevy® Silverado™ 2500 HD Clear Body for the Traxxas® Stampede® and Stampede® 4X4. Chevy fans – Pro-Line has you covered with the all-new Chevy® Silverado™ 2500 HD Clear Body for the Traxxas® Stampede®! Every curve, line and detail that you know and love from the full size truck has been shrunk down to fit on your Stampede® and Stampede® 4X4. If you're looking to take a brake from the status quo, and add some style to your daily routine get Pro-Line's new Chevy® Silverado™ 2500 HD Clear Body for your Traxxas® Stampede® and Stampede® 4X4 today!Don't forget to submit your finished Pro-Line Chevy® Silverado™ 2500 HD to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Made with Genuine GE .060 Lexan®
Perfect fit and proportions for the Stampede® and Stampede® 4X4
Bold Chevy® Silverado™ 2500 HD styling – Stand out among the crowd
Exceptional detail – From far away or close up, you and your friends will be able to see the detail
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Chevy® Silverado™ 2500 HD onto your Stampede®
Made in the USA, since 1982 - Read about Pro-Line Racing's History

Clear Lexan® Body
Decal sheet
Window mask included
Paint-then-peel overspray film included

Length: 15.6" (396mm)
Width: 5.7" (145mm)
Height: 4.3" (109mm)
Wheel Base: 10.0" (254mm)






statt UVP des Herstellers 32,95 €
29,65
Sie sparen 3,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-3355-00
This is a Flo-Tek Clear Body for Slash®, Slash® 4X4, SC10, XXX-SCT, Ten-SCTE, Ultima SC and Blitz. Introducing the first SC body specifically designed to minimize the short-course body parachute effect! If you have ever raced or bashed a short-course truck, you know that SC bodies act like parachutes when going over jumps, causing you to lose control and crash. Pro-Line's new Flo-Tek SC body features futuristic styling coupled with large vent holes that allow air to flow through eliminating aerodynamic drag. The locations and size of the vents were designed to maximize air flow through the body while keeping the aggressive and high-tech look. Don't get caught in the wind while the competition passes you by Get Pro-Line's new Flo-Tek SC body today!Don't forget to submit your finished Pro-Line Flo-Tek SC body to Reader's Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Aerodynamic design prevents body parachute effect
Bolt on modular number and side dam plates
Exceptional detail and style
Made with Crystal Clear Genuine GE Lexan®
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Flo-Tek onto your Slash®, Slash® 4x4, SC10, Ultima SC or Blitz
Made in the USA, since 1982 - Read about Pro-Line Racing’s History

Flo-Tek Clear Body (1 pc)
Number and side dam plates (2 pcs)
Aluminum Hardware Pack
Window templates
Decal Sheet

Traxxas® Slash
Traxxas® Slash 4x4
Associated SC10
Associated SC10 4x4
Losi XXX-SCT
Losi TEN-SCTE 4WD
HPI Blitz
Ultima SC

Length: 21.5" (546mm)
Width: 9.25" (235mm)
Height: 6.0" (152mm)
Wheel Base: 12.7" (323mm)




statt UVP des Herstellers 39,95 €
35,95
Sie sparen 4,00 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3364-00
This is a Toyota Tundra Clear Body for Short Course trucks. Attention all Toyota fans! Pro-Line has finally delivered the meanest body ever created for your Short Course truck: The Toyota Tundra. The Bold Toyota front grille screams for intense off-road action and tells everyone to get out of your way! The huge fenders allow clearance for the biggest and baddest Pro-Line tires and will give your truck the tough look you have been waiting for. The Toyota Tundra body features the latest in Pro-Line Flo-Tek technology with tons of air-vents that will keep your truck flying low and stuck to the track. This highly anticipated Short Course body is the only officially licensed Toyota Tundra body available and is brought to you by Pro-Line. Be the first at your track to represent Toyota and buy one for yourself today!Don't forget to submit your finished Pro-Line body to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Intense Toyota Tundra Short Course styling
Flo-Tek technology specifically designed to minimize parachute effect
Bolt on modular number and side dam plates
Made with Crystal Clear Genuine GE Lexan®
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your truck
Made in the USA, since 1982 – Read about Pro-Line Racing’s History

Toyota Tundra Clear Body (1 pc)
Number and side dam plates (4 pcs)
Aluminum Hardware Pack
Window templates
Decal Sheet

Traxxas® Slash®
Traxxas® Slash® 4x4
Associated SC10
Associated SC10 4x4
Losi XXX-SCT
Losi TEN-SCTE 4WD
HPI Blitz
Ultima SC

Length: 21.2" (539mm)
Width: 9.3" (236mm)
Height: 5.8" (147mm)
Wheel Base: 12.8" (325mm)
statt UVP des Herstellers 42,95 €
37,16
Sie sparen 5,79 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-3385-00
This is a Chevy® Silverado™ HD Clear Body for the Slash® 2WD and Slash® 4x4. It is time to man up and go HD with Pro-Line’s new Chevy® Silverado™ HD scale truck body! Pro-Line now gives you the option to convert your Slash® Short Course Truck into a True-Scale Lifted Truck. This scale truck body is perfect for making your friends jealous and giving your Truck a completely different look! Don’t show up to the local bash spot or track with the same body as everyone else… Get your True-Scale Chevy® Silverado™ HD body from Pro-Line today! *Note: This body requires extended body mounts for proper body fit* See Fits tab for more details.

Don't forget to submit your finished Pro-Line body to Reader’s Rides when you are done. Who knows, you could get your ride posted on the blog and you could even win a prize!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Amazing Licensed Chevy Scale Looks
Transforms your Slash® into a Tough Lifted Truck
Made with Crystal Clear Genuine GE Lexan®
Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Truck
Made in the USA, since 1982 – Read about Pro-Line Racing’s History

Chevy Silverado HD Clear Body (1 pc)
Window templates
Decal Sheet

Traxxas® Slash® ( with Pro-Line Extended Body Mount #6070-00 )
Traxxas® Slash® 4x4 ( with Pro-Line Extended Body Mount #6087-00 )
SC10 2WD (with Pro-Line Extended Body Mount #6071-00 )

Length: 20.7" (526mm)
Width: 9.3" (236mm)
Height: 6.0" (152mm)
Wheel Base: 12.9" (328mm)






statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1611-21
The ever popular 1/12th On-Road class is definitely a favorite with R/C racers and enthusiasts the world over. It has continued to evolve and grow in recent years, much to the delight of many. PROTOform has a long history of designing winning bodies for the ultra quick and nimble 1/12th On-Road class - with numerous ROAR Nationals, US Indoor Champs, Snowbird Nationals as well as IFMAR WORLDs titles on its resume. The all-new AMR-12 race body will prove to be a step forward, in appearance and speed.On Oct 1, 2009 there will be new ERFA/BRCA body rules that will come into effect, so a clean sheet type design was required by PROTOform in an effort to fully comply. The AMR-12 had been exhaustively tested in preparation for these rule changes and the body has actually shown an increase in performance over the old format type race bodies. Its made to fit all the popular 1/12th chassis with design considerations built in to accommodate the larger brushless motors and lead wires.

This semi-realistic body is pulled in .020 lexan and has a protective film on it. Ready to ship at this time, it's just in time to start practicing for the IIC Race in Vegas and the US Indoor Champs in Cleveland. Dont be left behind!

Features:

•Made from durable/genuine .020 Lexan material
•Contemporary LMP styling with slightly larger cockpit
•Fits all EFRA, BRCA, ROAR body rule requirements
•173mm wide @ front w/openings
•173mm wide @ rear w/openings
•55mm high @ top of roof
•65mm spoiler height
What's Included:

•Clear AMR-12 Body
•Window mask
•Decal sheet
statt UVP des Herstellers 23,95 €
21,55
Sie sparen 2,40 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-1227-21
Names like Bodine, Skinner and Hornaday continue to make the NASCAR Craftsman Truck Series one of the most exciting racing series anywhere in the world today. The racing is fast and intense, and the finishes are always close. Maybe this is why there's been a recent surge of interest in Oval Truck racing on many R/C tracks around the USA.

Here at PROTOform, we didn't want to be left out of the action so we're proud to present the all new PROTOform Oval Race Truck body or simply: the ORT.

The new ORT incorporates styling cues and aerodynamic tricks from all of the four brands represented in the NCTS. From its molded-in front splitter to its add-on rear spoiler it's a serious race body. It features two sets of trim lines for both carpet/foam racing (4.5 inch min height) and outdoor-capped tire racing (4.75 inch min height). It comes with clear protective film, spoiler mounting hardware and window masks. The ORT decal sheet features optional headlight and grill styles as well as all the Craftsman Truck's body details. Early testing has proven that the PROTOform ORT performs as well as it looks. It turns in hard and comes off stable. It's been chosen as the official oval truck body for the popular Brushless Racing League's 13.5 Masters Class.

Oval racing ace Dusty Kemp not only TQ'ed and Won the A-Main in the BRL tour's first event, but actual ran lap times equal to the 13.5 Brushless Stock Car class while using the PROTOform ORT body.

Hey - we've all known for a long time that America loves trucks. R/C oval racers are just doing what comes natural.

Features:

•Made from durable/ genuine .030 Lexan
•Superb molded in detail including rollbars
•Dual trim lines
•Paint then peel overspray film, window masks, and sticker sheet included
What's Included:

•Clear ORT Body
•Window mask
•Decal sheet
statt UVP des Herstellers 33,95 €
30,56
Sie sparen 3,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-3255-00
There's nothing like a classic automobile. It's rugged design, non-plastic interior screams ingenuity and provides a unique character. Maybe that's why most American's have such awe for classics; or, maybe it's because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to the future of automobiles with the release of the Early 50's Chevy for the Electric and Nitro Stampede .Pro-Line's classic car enthusiast's captured the overall essence of the Early 50's Chevy and made it available in 1:10 scale format for all Stampede chassis. Complete with detailed grill, headlights, body molding trim, and that overall distinct Early 50's look, all classic truck enthusiasts will come to appreciate the overall styling the 50's have to offer.

Features:

•Made with Genuine GE .040 lexan
•Perfect fit and proportions for Electric and Nitro Stampede
•Classic early 50's rounded body lines
•Includes decal sheet, window mask


What's Included:

•Clear Early 50's Chevy Body
•Window mask
•Decal sheet
statt UVP des Herstellers 32,95 €
29,65
Sie sparen 3,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3251-00
There's nothing like a classic truck! It's rugged design and non-plastic interior scream ingenuity making up its unique characteristics. Maybe that's why most American's have such awe for classics, or maybe it's because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to a blast from the past with the release of the 1972 Chevy C10.Pro-Line's classic car enthusiasts captured the overall essence of the C10 and is now available for your Traxxas Stampede Nitro & Electric trucks. Complete with detailed stock and custom grilles, headlights, taillights, and that overall distinct C10 look, all you classic truck enthusiasts will not want to be left behind.

When you're looking to relive a classic time in automotive history, then check out Pro-Line's new 1972 Chevy C10 pick-up.

Features:

•Made with Genuine GE .040 lexan
•Perfect fit and proportions for Electric and Nitro Stampede
•Classic 70's body lines
•Includes decal sheet, window mask


What's Included:

•Clear C10 Body
•Window mask
•Decal sheet
statt UVP des Herstellers 32,95 €
29,65
Sie sparen 3,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3246-00
Pro-Line extends their line of classic trucks with a timeless classic, the 1956 Ford F-100. There's nothing like a classic. Rugged, non-plastic interiors and simplistic designs of the 1950's cars and trucks seem to attract people of all ages to them. Pro-Line has captured the detail and look of the `56 F-100 and is now available for your MAXX, REVO 2.5, and Savage Trucks. When you're looking to add to your classic collection, or maybe you had a passion or the full scale version of the 1956 Ford F-100, then check out Pro-Line's scaled down version for today's most popular monster trucks.

Features:

•Made with Genuine GE .060 Lexan
•A true American Classic with simulated wood bed
•Paint-then-peel over spray film
•Detailed sticker sheet and window masks included
What's Included:

•Clear 1956 Ford F-100 body
•Window templates
•Decal Sheet
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3227-00
Theres nothing like a classic automobile. Its rugged design, non-plastic interior scream ingenuity and provide a unique character. Maybe thats why most Americans have such awe for classics; or, maybe its because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to the future of automobiles with the release of the 1972 Chevy C10 Long Bed.Pro-Lines classic car enthusiasts captured the overall essence of the C10 and have now made it available in 1:10 scale format for REVO 3.3, LST, LST2, MGT, TNX, and Genesis. Complete with detailed grill, headlights, body molding trim, and that overall distinct C10 look, all you classic truck enthusiasts will not want to be left behind.

When youre looking to go back in time in automotive history, then check out Pro-Lines new 1972 Chevy C10 Long Bed pick-up.

Features:

•Made with Genuine GE .060 Lexan
•Classic body lines
•Stock/Custom decal sheet included
•Paint then peel overspray film, sticker sheet, and window masks included
Whats Included:

•Clear 1972 Chevy C10 Long Bed Body
•Window mask
•Decal sheet
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-3238-62
The Baja Bug is back with the same style, quality, and features as it had the first time around and is now officially licensed by Volkswagen .When youre looking to outfit your Slash with the coolest, most durable, long-lasting body shells, then check out Pro-Line complete line Volkswagen Baja Bug bodies.

Features:

•Classic VW bug styling with Baja flair
•Simulated rear engine detail just like the stock motor
•Made from durable/genuine .060 Lexan
•Achieve a new look with optional add on spoiler
•Detail decal sheet with genuine Pro-Line'sponsors
•Paint-then-peel overspray film included
•Officially licensed by Volkswagen
What's Included:

•Clear VW Baja Body
•Spoiler
•Spoiler mounting hardware
•Decal Sheet
•Window Mask
Special Instructions for the Slash Body:

•Nerf bars will need to be removed if you want to run the Baja Bug Body
•Tape inside of body at chassis sides to better protect against paint damage (See instructions)
•Shown without rear bumper. The rear bumper is accepted but part of engine detail will need to be removed to clear the mounts.
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-3248-00
There's nothing like a full-scale classic truck! It's rugged design and classic lines scream ingenuity making up its unique characteristics. Maybe that's why most American's have such awe for classics, or maybe it's because of their simplicity. Whatever that case may be, you love them and are reminded of a different time. Pro-Line welcomes you back to a blast from the past with the release of the 1980 Chevy Pick-up.Pro-Line's classic car enthusiasts captured the overall essence of the 1980 Chevy Pick-up and is now available for REVO 3.3, LST, LST2, MGT, TNX, and Genesis trucks. Complete with detailed stock and custom grilles, headlights, taillights, and that overall distinct 80's look, all you classic truck enthusiasts will not want to be left behind.

When you're looking to relive a classic time in automotive history, then check out Pro-Line's scaled down version of the 1980 Chevy Pick-up.

Features:

•Made with Genuine GE .060 Lexan
•Classic body lines
•Paint then peel overspray film and window masks included
•Stock/Custom decal sheet included
What's Included:

•Clear 1980 Chevy Pick-Up
•Window mask
•Decal sheet
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-3307-60
Chevy race fans get ready to go thrashing through your off-road terrain with your Traxxas Slash, Slash 4x4 or Associated SC10 (additional trimming required) and Pro-Line's Chevy Silverado race body. Features:

•Bold off-road Short Course (SC) styling
•Extremely pronounced fenders for an attack-like stance
•Exceptional detail and style
•Made with Crystal Clear Genuine GE Lexan
•Four step to Race Ready:
1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Chevy Silverado onto your Slash
•Made in the USA
What's Included:

•Clear Chevy Silverado 1500 Body
•Window mask
•Decal sheet
statt UVP des Herstellers 43,95 €
39,56
Sie sparen 4,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-3322-00
An American auto icon, the Jeep® Wrangler Rubicon. Rugged, tough, and soon to be classic styling are now available from Pro-Line for 1:10 Scale Builders and Rock Crawler owners.The Jeep® Wrangler Rubicon is one of the first RC bodies to offer innovative hi-detail features such as front and rear bumpers and taillight lenses that are is easily attached with double stick tape or hardware of your choice. It's™ Jeep® styling is a perfect match to it's full size counterpart that made is an automotive classic.

Made from super strong lexan material, the Jeep® Wrangler Rubicon is ready for off-roading in a dirt field or rock mountain near you.

Features:

•Made with Genuine GE .060 Lexan®
•Classic body lines
•Paint then peel overspray film, sticker sheet,and window masks included
•** Double sided servo tape needed to install bumpers ** NOT INCLUDED
•** Extended rear body post are required ** NOT INCLUDED
When mounting on an Axial SCX10, Axial's AX80031 body post is required.
What's Included:

•Clear Jeep® Wrangler Rubicon Body
•Jeep® Wrangler Rubicon decal sheet
•Window mask included
•Paint-then-peel overspray film included
statt UVP des Herstellers 49,95 €
44,96
Sie sparen 4,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-9035-06
Description
Please note: All tires & wheels are sold in pairs, unless otherwise noted.


This is a pair of Pro-Line Sniper 1/8 buggy tires. Honey, I blew up the Hole Shot! The Sniper uses the same design philosophy and technology as the Hole Shot, but scaled up to work in looser and dustier conditions. After initial testing, Pro-Line team drivers like Ryan Cavalieri and Travis Amezcua are already sold on the tire saying that the Sniper offers awesome forward traction and side bite in a variety of track conditions. The bigger pins also provide longer wear, giving you lasting traction through long A-mains.


"I had a chance to run the Pro-Line Sniper tires at Hot Rods, let me say these are going to be a winner! Most noticeable was how much more traction/steering they had when the track was loose (the sun was still out and kinda wet, kinda dry). Normally my cars turn best with M4 Hole Shots, however I ran the snipers in M3 and they turned just as good and had more bite out of the corners. The Sniper tires were great!" Chad Bradley, Team Driver


Eliminate the competition by picking up a set of Pro-Line’s new Sniper tires.

Tire Features:

•Based on the World Champion Hole Shot
•Pro-Line’s square-lug technology
•Larger lugs for longer wear
•Made from M2 (Medium), M3 (Soft), M4 (Super Soft)
What’s Included:

•Sniper tires (2 pcs)
15,74

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-1163-14
This is a pair of Pro-Line Interco TSL SX Super Swamper 1.9" tires in G8 compound. Under official license from Interco Tire Corporation, Pro-Line is proud to announce the 1.9” TSL SX Super Swamper in the legendary G8 compound. With almost scale not being acceptable and access to Intercos design data, Pro-Line’s engineering staff have been able to reproduce the Super Swamper in a scale configuration matched by none.Features:

•Interco TSL SX Super Swamper replica design
•Available in G8 (Rock Terrain) compound
•Memory foam included
What’s Included:

•Interco TSL SX Super Swamper 1.9" G8 Rock Terrain Truck Tires (2 pcs)
•Oversized Memory Foam (2 pcs)


Search:
1163-14 | G8 (Rock Terrain)

statt UVP des Herstellers 32,95 €
29,65
Sie sparen 3,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1166-14
Under official license from Interco Tire Corporation, Pro-Line is proud to announce the 2.2" TSL SX Super Swamper in the legendary G8 compound. With almost scale not being acceptable and access to Interco's design data, Pro-Line’s engineering staff have been able to reproduce the Super Swamper in a scale configuration matched by none.Features:

•Interco TSL SX Super Swamper replica design
•Available in G8 (Rock Terrain)compound
•Memory foam included
What’s Included:

•Interco TSL SX Super Swamper 2.2" G8 Rock Terrain Truck Tires (2 pcs)
•Oversized Memory Foam (2 pcs)
statt UVP des Herstellers 34,95 €
31,45
Sie sparen 3,50 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-6063-05
DescriptionThis is a Pro-Line PowerStroke SC Universal Hardware Kit. Pro-Line PowerStroke SC Shocks are not just for Slash® any more. Now you can mount these race proven dampers to literaly any Short Course or desert truck using Pro-Line's Universal Hardware Kit.

This kit provides a direct fit of PowerStroke shocks to Ultima SC, SC10 and Blitz. The included Delrin pivot balls also provide superior PowerStroke shock mounting to Slash® and Slash® 4x4, allowing quicker shock removal and eliminating the dreaded screw back-out.

Features:

•High quality 3mm hardware
•Machined Delrin pivot balls for smooth action
•Universal kit can be used on a wide veriety of SC trucks
•PowerStroke SC Shocks (#6063-00 Front, #6063-01 Rear)

What's included:
•Delrin Pivot Balls (4)
•M3x25 SHCS Screws (4)
•M3x30 SHCS Screws (4)
•M3 Locknuts (4)
•M3 Nuts (4)
•M3 Washers (4)
statt UVP des Herstellers 12,95 €
11,65
Sie sparen 1,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1167-01
Description
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
SLASH® is a registered trademark of Traxxas® L.P.This is a pair of Pro-Line Street Fighter SC 2.2"/3.0" Tires. Looking for the ultimate long wear street tire? Then check out Pro-Line’s Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance of G force enhancement and style that will keep your truck turning heads.

Tire Features:

•Standardized 2.2"/3.0" SC bead dimensions
•Aggressive long wear tread
•Made from M2 (Medium) compound
What’s Included:

•Street Fighter SC 2.2"/3.0" Left Tire (1)
•Street Fighter SC 2.2"/3.0" Right Tire (1)
•Closed Cell Foam (2)
statt UVP des Herstellers 28,95 €
26,05
Sie sparen 2,90 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-6185-02
This is 1:10 4WD Front Buggy Closed Cell Inserts. Choosing the right insert for the right condition can be the difference between winning, losing, or just plain having bragging rights over a competitor on the track. Pro-Line now offers an aftermarket insert for you 1:10th scale 4WD buggy enthusiasts to use on those tracks that desire a firmer and longer lasting insert set-up.Want to save money on your favorite hobby? Then choose the Closed Cell inserts because they are water safe and reusable!

Check out the Closed Cell difference video!

6185-02 1:10 Closed Cell 4WD Front Foam Features:

* Closed Cell Technology
* No air gaps in between tires unlike other brands
* Perfectly balanced
* 100% water safe
* Reusable
* Extremely durable
* Light weight
* For use on tracks that desire a firmer insert

What's included:

* Closed Cell inserts (2 pcs)
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-6192-01
1:10 Truck Fans - This is 1:10 Truck Closed Cell Rear Inserts. Choosing the right insert for the right condition can be the difference between winning, losing, or just plain having bragging rights over a competitor on the track. Pro-Line now offers an aftermarket insert for you 1:10th scale truck enthusiasts to use on those tracks that desire a firmer and longer lasting insert set-up.Want to save money on your favorite hobby? Then choose the Closed Cell inserts because they are water safe and reusable!

Check out the Closed Cell difference video!

6192-01 1:10 Closed Cell Foam for Truck Features:

o Closed Cell Technology
o No air gaps in between tires unlike other brands
o Perfectly balanced
o 100% water safe
o Reusable
o Extremely durable
o Light weight
o For use on tracks that desire a firmer insert



What's included:
o Closed Cell inserts (2 pcs)
statt UVP des Herstellers 14,95 €
13,46
Sie sparen 1,49 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-9039-02
This is a pair of Blockade Off-Road 1:8 Buggy Tires. Historic. Revolutionary. The Best. Just a few words that have been used to describe Pro-Line's new Blockade tire. History was made the first time the Blockade touched the race track – Winning the 2011 ROAR Fuel Off-Road Nationals by 2 laps at the hands of Ryan Cavalieri! The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires. This tire will give your D8, RC8B, MP9, MBX-6, 8ight or Hyper buggy qualifying speed with tread life capable of handling hour long A-mains. Pro-Line's Blockade is the new must-have 1:8 Buggy Race tire and will dominate your local track. The Blockade – The latest way that Pro-Line is Racing to Bring You The Best!
Please note: All tires & wheels are sold in pairs, unless otherwise noted.features:
* History making - 2011 ROAR Fuel Off-Road National Champion
* Revolutionary tread design for maximum life and traction
* Available in M2 (Medium), M3 (Soft) and M4 (Super Soft) compounds
* Next Generation Closed Cell Inserts included

what's included:
* Blockade Off-Road 1:8 Buggy Tires (2 pcs)
* Next Generation Closed Cell Inserts (2 pcs)

specs:
Height: 4.37" (111mm)
Width: 1.68" (43mm)

statt UVP des Herstellers 18,90 €
20,72

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-8206-03
Please note: All tires & wheels are sold in pairs, unless otherwise noted.

This is a pair of Pro-Line Hole Shot 2.0 2.2" Rear tires for 1:10 Off-Road Buggy in M4 (Super Soft) compound. The Hole Shot is the tire that everyone turns to when looking for an edge over the competition because it just works, everywhere. Period. Now that it is available in the M4 (Super Soft) compound, your Buggy world domination can begin.

This will work on today’s most popular 1:10 Buggies such as the Associated B4 or B44, Hot Bodies D-4, Kyosho RB5 or Lazer ZX-5, Losi XXX-CR or XXX-4 and Traxxas Bandit. The Hole-Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable. Pro-Line's development staff is now proud to announce the Hole-Shot 2.0. The 2.0 version features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 is a must have tire in everyone’s racing arsenal; get one today!

Tire Features:

* M4 (Super Soft) tire compound for amazing traction
* Updated pin design lasts longer
* Small, square-lug technology throughout tire
* New outer pins are angled to resist catching ruts
* Internal webbing reduces tire expansion under acceleration
* Fits any 1:10 2.2" Buggy front wheel
* Foam Inserts included
* Made in the USA, since 1982 - Read about Pro-Line Racing’s History

What’s Included:

* Hole Shot 2.0 2.2" M4 Rear Tires (2 pcs)
* Firm Foam Inserts (2 pcs)
* Pro-Line decal (1 pc)

statt UVP des Herstellers 18,95 €
17,05
Sie sparen 1,90 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-9039-03
This is a pair of Blockade Off-Road 1:8 Buggy Tires. Historic. Revolutionary. The Best. Just a few words that have been used to describe Pro-Line's new Blockade tire. History was made the first time the Blockade touched the race track – Winning the 2011 ROAR Fuel Off-Road Nationals by 2 laps at the hands of Ryan Cavalieri! The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and uniquely blended side tread that reduces the edginess found in other race tires. This tire will give your D8, RC8B, MP9, MBX06, 8ight, or Hyper buggy qualifying speed with tread life capable of handling hour long A-mains. Pro-Line's Blockade is the new must-have 1:8 Buggy Race tire and will dominate your local track. The Blockade – The latest way that Pro-Line is Racing to Bring You The Best!
Please note: All tires & wheels are sold in pairs, unless otherwise noted.features:
* History making - 2011 ROAR Fuel Off-Road National Champion
* Revolutionary tread design for maximum life and traction
* Available in M2 (Medium), M3 (Soft) and M4 (Super Soft) compounds
* Next Generation Closed Cell Inserts included

what's included:
* Blockade Off-Road 1:8 Buggy Tires (2 pcs)
* Next Generation Closed Cell Inserts included (2 pcs)

specs:
Height: 4.37" (111mm)
Width: 1.68" (43mm)
statt UVP des Herstellers 18,90 €
20,72

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1170-00
This is a pair of Pro-Line Trencher 2.8" (Traxxas® Style Bead) All Terrain Truck Tires (2) for Front or Rear of the Traxxas® Stampede® and Stampede® 4X4. Pro-Line is very excited to announce the availability of the Trencher 2.8" designed specifically for the Traxxas® Stampede® and Stampede® 4X4! The Trencher 2.8" is a direct replacement tire and will fit on any Traxxas® Style Bead 2.8" wheels. Pro-Line's world class development team spent several months of research, development and testing to ensure that the Trencher 2.8" tire will perform above and beyond your expectations in any condition that you take your Stampede® or Stampede® 4X4. Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher 2.8" tire is up to the task. If you only buy one tire for your Stampede® or Stamped® 4X4, this is the one to buy!The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Each tire lug is shaped to dig into whatever surface you are running on and is ultra-thick so that it is extremely durable. The popular Trencher tread pattern can also be found on Short Course, 40 Series Monster Truck and the Baja 5T, so get them all!

Features:

* Horizontal H shaped tread for ridiculous amounts of traction and side-to-side stability
* Over-sized tall tread are second-to-none in durability and longevity
* For use with any Traxxas® Style Bead 2.8" wheels
* Extremely detailed sidewall design for that tough off-road look
* Official Pro-Line logo and Trencher name embossed on sidewall of tire
* Made in the USA, since 1982 - Read about Pro-Line Racing's History

What's Included:

* Trencher 2.8" tire (2 pcs)
* Foam inserts (2 pcs)
* Pro-Line decal (1)
statt UVP des Herstellers 24,95 €
22,46
Sie sparen 2,49 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1180-02
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
SLASH® is a registered trademark of Traxxas® L.PThis is a pair of Hole Shot 2.0 SC 2.2”/3.0” M3 (Soft) Tires (2) for Slash®, Slash® 4x4, SC10, Blitz and Ultima Front or Rear. Short course trucks have become class leaders at many tracks around the nation because it’s fun and there’s a class for everyone. For those of you that want the most out of your short course truck, you need the new and improved Hole Shot 2.0 SC tires!

The Hole-Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable. Pro-Line's development staff is now proud to announce the Hole-Shot 2.0 SC, which features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design provides gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 SC is a must have tire in everyone’s racing arsenal; get one today!

Features:

* Legendary Multi-time World and National Championship winning design in all scales
* Wider contact patch for improved traction in all conditions
* Highly reinforced tire carcass
* Available in World Championship/extremely proprietary M3 (Soft) and M4 (Super Soft) compounds
* Long life/lightweight closed cell foam inserts included (Gray Supplemental Foam Inserts Required when mounting tires on Stock Traxxas® wheels or other step down wheel designs)
* Made in the USA, since 1982 - Read about Pro-Line Racing’s History

Fits:

* 2.2"/3.0" Short Course Wheels

What’s Included:

* Hole Shot 2.0 SC tires (2 pcs)
* Closed Cell inserts (2 pcs)
* Pro-Line decal (1)
statt UVP des Herstellers 28,95 €
26,05
Sie sparen 2,90 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-1180-03
Please note: All tires & wheels are sold in pairs, unless otherwise noted.
SLASH® is a registered trademark of Traxxas® L.PThis is a pair of Hole Shot 2.0 SC 2.2”/3.0” M4 (Super Soft) Tires (2) for Slash®, Slash® 4x4, SC10, Blitz and Ultima Front or Rear. Short course trucks have become class leaders at many tracks around the nation because it’s fun and there’s a class for everyone. For those of you that want the most out of your short course truck, you need the new and improved Hole Shot 2.0 SC tires!

The Hole-Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole-Shot design has won just about every title imaginable. Pro-Line's development staff is now proud to announce the Hole-Shot 2.0 SC, which features more pins and a wider contact patch for insane amounts of traction. The unique mini-pin design provides gives the optimum level of traction in dusty, hard-packed and grooved conditions. The Hole Shot 2.0 SC is a must have tire in everyone’s racing arsenal; get one today!

Features:

* Legendary Multi-time World and National Championship winning design in all scales
* Wider contact patch for improved traction in all conditions
* Highly reinforced tire carcass
* Available in World Championship/extremely proprietary M3 (Soft) and M4 (Super Soft) compounds
* Long life/lightweight closed cell foam inserts included (Gray Supplemental Foam Inserts Required when mounting tires on Stock Traxxas® wheels or other step down wheel designs)
* Made in the USA, since 1982 - Read about Pro-Line Racing’s History

Fits:

* 2.2"/3.0" Short Course Wheels

What’s Included:

* Hole Shot 2.0 SC tires (2 pcs)
* Closed Cell inserts (2 pcs)
* Pro-Line decal (1)
statt UVP des Herstellers 28,95 €
26,05
Sie sparen 2,90 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-1167-17
Short Course Fans - This is a pair of Pro-Line Street Fighter SC Tires Mounted on Renegade Black Wheels. Looking for the ultimate long wear street tire? Then check out Pro-Line’s Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance of G force enhancement and style that will keep your truck turning heads.Combining the Street Fighter with the Renegade, Pro-Line is changing it up with another bold new option for all the Slash® or Blitz owners. The Pro-Line Renegade wheels feature a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. The detailed beadloc and lug nut hardware also adds to the realism.

Glued by the Pros here at Pro-Line, the new Street Fighter Premounts also include closed cell inserts for the all-time best street fighting action!

When you are ready to take your Slash® or Blitz to the next level, then check out the Street Fighter Premounts.

Tire Features:

* Standardized 2.2”/3.0” SC bead dimensions
* Aggressive long wear tread
* Made from M2 (Medium) compound

Wheel Features:

* Lightweight one-piece design
* 2.2" outer bead and 3.0" inner bead
* Simulated Bead-Loc ring
* Wheel made from high-strength, durable DuPont nylon material
* 10 Spoke design for increased rigidity

Foam Features:

* Matches the contour of the SC tire profile
* High density, reusable and waterproof
* Perfectly balanced
* Extremely durable
* Light weight
* Made 100% in the USA

Fits:

* [R] Slash
* [F/R] Slash 4x4
* [F/R] Blitz
* [F/R] SCRT10

What’s Included:

* Street Fighter tires mounted on Renegade Black wheels (2 pcs)
* Includes Closed Cell Inserts Inside (2 pcs)



Search:
1167-17 | Street Fighter SC tires Mounted on Renegade Black wheels
statt UVP des Herstellers 39,95 €
35,95
Sie sparen 4,00 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-2735-02
This is a pair of Velocity 2.2” front Hex Yellow Wheels for RB5 and B4.1 *with 12mm hex. Pro-Line has you covered with lightweight and durable front racing wheels for the RB5 and B4.1 buggies. The wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome new look to your buggy. Pro-Line’s new wheels are ready to take your buggy to the front of the pack, so order some today!
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-2735-04
This is a pair of Velocity 2.2” Front Hex Ehite Wheels for RB5 and B4.1 *with 12mm hex. Pro-Line has you covered with lightweight and durable front racing wheels for the RB5 and B4.1 buggies. The wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome new look to your buggy. Pro-Line’s new wheels are ready to take your buggy to the front of the pack, so order some today!
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-2736-02
This is a pair of Velocity 2.2” Rear Hex Yellow Wheels for the TLR 22, RB5 and B4/B4.1 buggies *with 12mm hex. Pro-Line has you covered with ultra-lightweight and durable rear racing wheels for the TLR 22 buggy. Eliminating rotating mass in such a precision class is crucial to gaining an edge over the competition and Pro-Line’s new wheels shave off several grams of weight compared to the stock wheels. The wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome new look to your buggy. Pro-Line’s new wheels are ready to take your buggy to the front of the pack, so order some today!
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-2736-04
This is a pair of Velocity 2.2” Rear Hex White Wheels for the TLR 22, RB5 and B4/B4.1 buggies *with 12mm hex. Pro-Line has you covered with ultra-lightweight and durable rear racing wheels! Eliminating rotating mass in such a precision class is crucial to gaining an edge over the competition and Pro-Line’s new wheels shave off several grams of weight compared to the stock wheels. The wheels feature the latest in style and performance that will make your buggy look good racing around the track. The wheels feature a reversed dish design that protects the nut and axle from damage during collisions and brings an awesome new look to your buggy. Pro-Line’s new wheels are ready to take your buggy to the front of the pack, so order some today!
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-6185-03
This is a pair of 1:10 2WD Front Buggy Closed Cell Inserts. Choosing the right insert for the right condition can be the difference between winning, losing, or just plain having bragging rights over a competitor on the track. Pro-Line now offers an aftermarket insert for 1:10th scale 2WD buggy enthusiasts to use on those tracks that desire a slightly firmer and longer lasting insert set-up. A common problem with 2WD buggies is that the die-cut foam inside the front tires usually wears out long before the tires. Now, with Pro-Line’s new closed cell foam, this durability problem has been eliminated! Pro-Line’s 2WD front closed cell foam is unlike the rock-hard foam that others try to sell because it has just the right amount of firmness that racers desire.
Want to save money on your favorite hobby? Then choose the Closed Cell inserts because they are water safe and reusable! Pick up a set today!
statt UVP des Herstellers 9,95 €
8,96
Sie sparen 0,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-9041-02
This is a pair of Hole Shot 2.0 Off-Road 1:8 Buggy Tires. The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole Shot design has just about every title imaginable because it just plain works in a variety of different race conditions. Now, Pro-Line has achieved the impossible: improved on the original in every way. Through meticulous refinement the new Hole Shot 2.0 has the performance to carry on the legendary Hole Shot name well into the next Decade. The Hole Shot 2.0 provides more forward traction, increased steering response and is less edgy in the ruts making you faster than ever before. Richard Saxton, Team Associated’s testing guru, says that the new Hole Shot 2.0 is “like Cheating!!” Pro-Line’s mini-pin and square lug technology combine to give your Buggy TQ pace and last through long mains. Buy some new Hole Shot 2.0 Buggy tires now!
statt UVP des Herstellers 18,90 €
20,72

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-9041-03
This is a pair of Hole Shot 2.0 Off-Road 1:8 Buggy Tires. The Hole Shot is renowned across the world as one of the most used race tires of all time. From World Championships to National Championships, Regional race events to club race events, the Hole Shot design has just about every title imaginable because it just plain works in a variety of different race conditions. Now, Pro-Line has achieved the impossible: improved on the original in every way. Through meticulous refinement the new Hole Shot 2.0 has the performance to carry on the legendary Hole Shot name well into the next Decade. The Hole Shot 2.0 provides more forward traction, increased steering response and is less edgy in the ruts making you faster than ever before. Richard Saxton, Team Associated’s testing guru, says that the new Hole Shot 2.0 is “like Cheating!!” Pro-Line’s mini-pin and square lug technology combine to give your Buggy TQ pace and last through long mains. Buy some new Hole Shot 2.0 Buggy tires now!
statt UVP des Herstellers 18,90 €
20,72

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1052-01
This is a pair of Sand Paw 2.0 2.2” Sand Truck Rear Tires. Do you love to take your truck in the sand or snow but just keep slipping and sliding around? Then you need Pro-Line’s Sand Paw 2.0 2.2” paddle tires that are guaranteed to give you incredible traction in the sand or snow! The Sand Paw 2.0 features split paddles – just like the best-selling, original Sand Paw – that will fling sand or snow in a big rooster tail behind your truck! The Sand Paw 2.0 is also made out of improved rubber that will last longer and give you better traction. Grab a pair of Sand Paw 2.0 2.2” truck tires today!
statt UVP des Herstellers 23,95 €
21,55
Sie sparen 2,40 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

Artikel-Nr.: PL-1182-01
This is a pair of Badlands SC 2.2”/3.0” Tires for Short Course Trucks. Are you ready to chew up the dirt and spit it out in a huge spray behind your SC truck? If so, then the Badlands SC tire is exactly the tire that you have been waiting for.The Badlands SC tire offers motocross style tread with huge, long-lasting lugs giving it the looks and performance that have won over bashers all across the globe. The Badlands tread design is made for the die-hard motocrosser in you. Its oversized grass and dirt shredding lugs offer you the ultimate in performance under all-terrain type conditions.

The lugs are designed to ensure longevity while spitting up the surface below. Made from soft yet durable M2 compound, the Badlands tire is poised for battle and ready to take your Short Course Truck to the next level of bashing heaven. Get a set of Badlands SC tires for your Short Course truck today!

statt UVP des Herstellers 27,95 €
23,78
Sie sparen 4,17 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-1183-02
This is a pair of Blockade SC 2.2”/3.0” M3 (Soft) Tires for Short Course Trucks. Welcome to the future of Short Course Racing – Meet the new tire that will take you there: Blockade SC. Inspiration was taken directly from the National Championship Winning 1:8 Buggy tires, providing you with the latest and greatest technology for your Short Course Truck.The Revolutionary tread design features large lugs for class leading tread life, perfectly balanced tread spacing for maximum forward bite and unique side tread that keeps you planted around the corners. The Blockade excels in a wide variety of conditions – from hard packed to blue-groove and loose to loamy, the Blockade SC tires will outpace and outlast the competition. If you are ready to step into the future and put your SC truck on top, get your own set of Blockade SC tires now!



Driver Testimonial

“The Blockade SC tires fit into the in-between track conditions where it’s too loose for a Hole Shot and too hard packed for Caliber. The Blockade SC tires have excellent forward traction and side bite on hard packed base with loose surface. I can’t wait to continue to test the excellent wear on my set of Blockade SC M3 tires!” Pro-Line Team Driver - Alex Eklund

statt UVP des Herstellers 28,95 €
26,05
Sie sparen 2,90 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-2739-03
This is a pair of F-11 +3mm Offset Short Course Truck Wheels. Pro-Line is proud to introduce an all-new Short Course wheel design: the Formula 11 spoke +3mm offset Short Course Wheel. This +3mm wider offset wheel brings the Associated Short Course trucks out to maximum legal width and makes the trucks more stable in the corners and over the bumps. The new F-11 wheel styling brings the tough and rugged look of full-size Short Course trucks straight to your truck. The wheel features a molded-in bead-loc ring, 11 triangulated spokes and a scale P-L logo. This is a must have wheel for all Pro-Line and Associated SC fans!
statt UVP des Herstellers 13,95 €
12,55
Sie sparen 1,40 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-1185-02
This is a pair of Tazer SC 2.2”/3.0” M3 (Soft) Tires for SC Trucks. Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology: the Tazer, now for Short Course Trucks! With the inputs of World Class drivers Ty Tessmann and Ryan Cavalieri, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads designed to last and perfectly sized lugs that will propel you to the top of the podium. Bring the competition to its knees - Get some Tazer tires today!


statt UVP des Herstellers 27,95 €
22,71
Sie sparen 5,24 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: PL-6070-00
This is an Extended Body Mount Kit for the Slash 2wd. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

Completely adjustable body mounts so virtually any body will fit perfectly
Innovative screw on body mounting system
Long body mounts included to fit Rally Car Bodies
Made from Ultra-Durable Nylon
Replacement parts:
6070-01 Body Mount Plastics
6070-02 Thumbwasher Kit

Body Mounts and Posts (Front & Rear)
Mounting Hardware

Traxxas® Slash®




statt UVP des Herstellers 19,95 €
17,96
Sie sparen 1,99 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-6087-00
his is an Extended Body Mount Kit for the Slash 4x4. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today! Completely adjustable body mounts so virtually any body will fit perfectly
Innovative screw on body mounting system
Long body mounts included to fit Rally Car Bodies
Made from Ultra-Durable Nylon
Replacement parts:
6087-01 Body Mount Plastics
6070-02 Thumbwasher Kit

Body Mounts and Posts (Front & Rear)
Mounting Hardware

Traxxas® Slash® 4x4

statt UVP des Herstellers 17,95 €
16,16
Sie sparen 1,79 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /27.10.

Artikel-Nr.: PL-8220-02
This is a pair of Hole Shot 2wd Front Buggy Tires. 2WD Buggy racing has made a huge comeback and Pro-Line is expanding our tire line-up to give you an advantage in every race condition. If you race your buggy outdoors, then you need Pro-Line’s new Hole Shot 2WD Front Tires. Unlike the typical ribbed front tire, the new Hole Shot 2WD fronts are super smooth while still maintaining all the steering you need. Ribbed fronts are known for doing the catch-and-grab at the wrong time leading to inconsistent handling. Pro-Line’s new Hole Shot 2wd Front tires set the new standard in steering for every outdoor track condition, from super loose to hard-packed. Lead the pack at your local track and get Pro-Line’s new Hole Shot Front Tires Today! Please note: All tires & wheels are sold in pairs, unless otherwise noted.

Super Smooth Front Tire Ideal for Outdoor Track Conditions
Based on the Legendary Holeshot Tread Pattern
Next Generation Front Tire Technology – Makes Ribbed Fronts Obsolete
Available in M3 (Soft) and M4 (Super Soft) compounds
Made in the USA, since 1982 – Read about Pro-Line Racing’s History

Hole Shot 2.2” Front Buggy tires (2 pcs)
Foam Inserts (2 pcs)

Height: 3.33" (85mm)
Width: 1.18" (30mm)

statt UVP des Herstellers 16,95 €
15,43
Sie sparen 1,52 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /27.10.

1 - 50 von 728 Ergebnissen