Drucken

Onroad

Onroad

Anzeige pro Seite
Sortieren nach
Artikel-Nr.: PL-1546-40
Chevrolet®’s Corvette™ C7.R has the set the worldwide sportscar racing scene on fire since its debut, capturing the triple-crown of GTLM-class endurance racing with wins at the 24 Hours of Le Mans, 24 hours of Daytona and 12 Hours of Sebring.

PROTOform brings Corvette Racing’s championship heritage to 1:8 GT Class racing with the officially-licensed Corvette™ C7.R race body. From the signature Corvette™ muscular stance and swept-back roofline, to the large front splitter and side vents, every detail of the 1:1 race car is captured to add scale realism to the world of 1:8 GT. The extensive decal sheet lets you deck out your C7.R with Corvette™ branded windshield headers, “Jake” skull hood logo, number plates, and USA flags. Included with the body is an add-on rear wing, secured with three oversized nylon screws and featuring 2 trim-lines and spill-plate sizes: a lower line for sanctioned racing, and an upper line for low-grip club racing.

This body fits 1:8 GT cars with the longer (GT2) wheelbase of 360mm, such as the Kyosho Inferno GT2. GT1 class racers, don’t fret: a shorter wheelbase version (328mm) of the C7.R is coming soon.



General Motors® trademarks used under license to Pro-Line.
Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Features

Incredible scale details
Officially-licensed by General Motors
Add Scale Realism to Your 1:8 GT
Comprehensive decal sheet included
2 Wing Trim Lines & spill plates for Sanctioned or Low-Grip Racing
Fits GT2 (360mm) wheelbase, GT1 Version Coming Soon
Made in the USA

What's Included

Clear Chevrolet® Corvette™ C7.R body
Add-on Wing
Wing Mounting Hardware
Decal Sheet
Window masks & paint-then-peel overspray film

Fits

for 1:8 GT (Long Wheelbase)

Spec

Length: 25.23" (641mm)
Width: 12.2" (310mm)
Height: 5.91" (150mm)
Wheel Base: 14.17" (360mm)

statt UVP des Herstellers 55,95 €
50,36
Sie sparen 5,59 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /16.04.

Artikel-Nr.: PL-1551-40
Chevrolet®’s Corvette™ C7.R has the set the worldwide sportscar racing scene on fire since its debut, capturing the triple-crown of GTLM-class endurance racing with wins at the 24 Hours of Le Mans, 24 hours of Daytona and 12 Hours of Sebring.

PROTOform brings Corvette Racing’s championship heritage to 1:8 GT Class racing with the officially-licensed Corvette™ C7.R race body. From the signature Corvette™ muscular stance and swept-back roofline, to the large front splitter and side vents, every detail of the 1:1 race car is captured to add scale realism to the world of 1:8 GT. The extensive decal sheet lets you deck out your C7.R with Corvette™ branded windshield headers, “Jake” skull hood logo, number plates, and USA flags. Included with the body is an add-on rear wing, secured with three oversized nylon screws and featuring 2 trim-lines and spill-plate sizes: a lower line for sanctioned racing, and an upper line for low-grip club racing.

This body fits popular 1:8 GT cars with the shorter (GT1) wheelbase of 325mm, such as the Mugen Seiki MGT7, Serpent Cobra GT and more. For GT2 racers, a longer wheelbase version (360mm) of the C7.R is also available.

General Motors®, Chevrolet® Corvette™ C7.R trademarks used under license to Pro-Line.

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Features

Incredible scale details
Officially-licensed by General Motors
Add Scale Realism to Your 1:8 GT
Comprehensive decal sheet included
2 Wing Trim Lines & spill plates for Sanctioned or Low-Grip Racing
Fits GT1 (325mm) wheelbase, GT2 Version also available
Made in the USA

What's Included

Clear Chevrolet® Corvette™ C7.R body
Add-on Wing
Wing Mounting Hardware
Decal Sheet
Window masks & paint-then-peel overspray film

Spec

Length: 25.23" (641mm)
Width: 12.2" (310mm)
Height: 5.91" (150mm)
Wheel Base: 12.8" (325mm)
statt UVP des Herstellers 55,95 €
50,36
Sie sparen 5,59 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /16.04.

Artikel-Nr.: PL-1550-25
Simply put: Ford® GT is one of the coolest street cars ever designed, and PROTOform is proud to bring it to 190mm Touring Cars for USGT-Class racing.

From the ultra-low stance, to the teardrop-shaped cockpit, to the never-before-seen b-pillar “side wings”, the Ford® GT is the ultimate expression of form following function. PROTOform has captured every detail of this mid-engine sportscar that captured GT class wins at the 2016 24h of Le Mans and back-to-back 24h of Daytona in 2017 and 2018.

This officially-licensed body fits 1:10 190mm touring cars, with extra clearances built-in to fit over the front and rear shock towers. Ford® GT's distinctive side wings are add-on pieces that can be secured with the included hardware, shoo-goo or high-strength double-sided tape. New lighter-weight material lowers the center of gravity of your USGT car, improving responsiveness.

Each body also includes injection molded nylon wing struts, a unique rear wing, decal sheet, window masks, and overspray film.

Ford Motor Company Trademarks and Trade Dress used under license to Pro-Line.
Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. Ecoboost, sponsor logo and number plate decals not included. Fits modern 190mm Touring Cars with low profile shock towers, ie. All Awesomatix, forward from Xray T3, AE TC6,, Yokomo BD7. Does not fit AE TC4-TC5.
Click Here for painting tips



Search: 1550-25 | Ford GT Light Weight Clear Body for 190mm Touring Cars

Features

Perfectly suited for USGT Class
Distinctive add-on side wings
Exceptional scale detail
Molded wing struts
Officially-licensed by Ford
Proudly Made in the USA

What's Included

Ford GT Clear Body
B-pillar side wings (2 pcs)
Side wing mounting hardware (16 pcs)
Nylon wing struts (2 pcs)
Extensive Decal sheet
Wing mounting hardware (4 pcs)
Window Masks
Paint-then-peel overspray film

Fits

Modern 190mm Touring Cars with low profile shock towers, ie. Forward from Xray T3, AE TC6, All Awesomatix, Yokomo BD7. Does not fit AE TC4-TC5.

Specs

Length: 17.25" (438mm)
Width: 7.6" (192.5mm)
Height: 3.89" (99mm)
Wheelbase: 10.2" (258mm)
statt UVP des Herstellers 39,95 €
35,95
Sie sparen 4,00 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /16.04.

Artikel-Nr.: PL-1569-25
The last four 1:8th IC On-Road IFMAR Worlds Championship winners have relied on PROTOform to finish on the top step of the podium. In our quest for a 5th straight, we're introducing the all-new PROTOform X-15 race body. The "X-15" name is legendary and carries with it an enduring reputation of innovation, sheer speed, and record-setting performance.

This new body style has been exhaustively tested by our world-class team of drivers and has proven to be a step forward in predictable handling and lower lap times. Many unique shapes and proportions have been developed during its evolution process including streamlined cockpit and never-before-seen shrouding around the engine area. These features are sure to make the X-15 race body stand out at your track.

The X-15 is Global Body Spec compliant and ROAR approved. Made in the USA from our high-quality, super-durable polycarbonate, it is available in both PRO-Lite and Light Weight materials. Included with the body are our universal stiffeners with hardware, a stylish decal sheet, and overspray film to complete the package.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.
Click Here for painting tips

Search:
1569-25 | X-15 PRO-Lite Clear Body
1569-30 | X-15 Light Weight Clear Body

Features

Never-Before Seen Aerodynamic Features
Streamlined Cockpit
Airflow-management Shrouding Around Engine Area
ROAR APPROVED

What's Included

X-15 Clear Body
Decal Sheet
Paint-then-peel-overspray Film
Side Stiffeners w/ Hardware

Fits

1:8 On-Road

Specs

Length: 508mm
Width: 264mm
Height: 147mm
Wheelbase: 295mm
statt UVP des Herstellers 41,95 €
37,76
Sie sparen 4,19 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /20.04.

Artikel-Nr.: PL-1569-30
The last four 1:8th IC On-Road IFMAR Worlds Championship winners have relied on PROTOform to finish on the top step of the podium. In our quest for a 5th straight, we're introducing the all-new PROTOform X-15 race body. The "X-15" name is legendary and carries with it an enduring reputation of innovation, sheer speed, and record-setting performance.

This new body style has been exhaustively tested by our world-class team of drivers and has proven to be a step forward in predictable handling and lower lap times. Many unique shapes and proportions have been developed during its evolution process including streamlined cockpit and never-before-seen shrouding around the engine area. These features are sure to make the X-15 race body stand out at your track.

The X-15 is Global Body Spec compliant and ROAR approved. Made in the USA from our high-quality, super-durable polycarbonate, it is available in both PRO-Lite and Light Weight materials. Included with the body are our universal stiffeners with hardware, a stylish decal sheet, and overspray film to complete the package.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.
Click Here for painting tips

Search:
1569-25 | X-15 PRO-Lite Clear Body
1569-30 | X-15 Light Weight Clear Body

Features

Never-Before Seen Aerodynamic Features
Streamlined Cockpit
Airflow-management Shrouding Around Engine Area
ROAR APPROVED

What's Included

X-15 Clear Body
Decal Sheet
Paint-then-peel-overspray Film
Side Stiffeners w/ Hardware

Fits

1:8 On-Road

Specs

Length: 508mm
Width: 264mm
Height: 147mm
Wheelbase: 295mm

statt UVP des Herstellers 41,95 €
37,76
Sie sparen 4,19 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /20.04.

Artikel-Nr.: PL-1572-30
When IFMAR announced the first-ever 1/8th GT Worlds with a new set of Global Body Spec rules, we set out to design a new body that was not only fast, but also relevant to the 1:1 racing era that is here & now. In the past, GT8 cars have always featured cab-forward sports-car style bodies. But in recent years, the rapid advancement of the full-scale GT cars has evolved into the Supercar, and then more recently into the Hypercar that will be featured in the premier class at the Le Mans 24h in 2020. The interest level when these cars hit the track next rear will be off-the-charts!

So we're following suit here at PROTOform. The game-changing Hyper-SS race body brings 1/8th GT cars into the 21st Century in both style and performance. The radical, low-slung shape includes a unique rear-wing with molded-in Gurney flap. At the rear window area, low-drag louver vents can be trimmed out to allow for efficient engine cooling if required. The Hyper-SS meets all 1/8th GT Global Body Spec rules and is already approved for IFMAR competition at the upcoming World Championship

This body fits popular 1:8 GT cars with the shorter (GT1) wheelbase of 325mm, and comes with rear wing, nylon wing mounting hardware, decal sheet, window masks, and overspray film. It is available in 2 weights of high-quality polycarbonate: Regular Weight (1mm) and Light Weight (.75mm) for expert racers only.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.
Click Here for painting tips

Search:
1572-30 | Hyper-SS Light Weight Clear Body
1572-40 | Hyper-SS Regular Weight Clear Body

Features

High Downforce, Low-CG Aerodynamics
1:1 Hypercar-insprired styling
Low-drag louver vents for efficient cooling
Rear wing with molded-in Gurney flap
Global Body Spec Compliant & IFMAR Approved
Made in the USA

What's Included

Clear Hyper-SS Body
Clear Hyper-SS Wing
Wing Hardware (6 pcs)
Decal Sheet
Window Masks
Paint-then-peel Oversrpay Film

Fits

1:8 GT - 325mm Wheelbase

Specs

Length: 610mm
Width: 311mm
Wheelbase: 325mm
statt UVP des Herstellers 54,95 €
49,46
Sie sparen 5,49 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /20.04.

Artikel-Nr.: PL-1572-40
When IFMAR announced the first-ever 1/8th GT Worlds with a new set of Global Body Spec rules, we set out to design a new body that was not only fast, but also relevant to the 1:1 racing era that is here & now. In the past, GT8 cars have always featured cab-forward sports-car style bodies. But in recent years, the rapid advancement of the full-scale GT cars has evolved into the Supercar, and then more recently into the Hypercar that will be featured in the premier class at the Le Mans 24h in 2020. The interest level when these cars hit the track next rear will be off-the-charts!

So we're following suit here at PROTOform. The game-changing Hyper-SS race body brings 1/8th GT cars into the 21st Century in both style and performance. The radical, low-slung shape includes a unique rear-wing with molded-in Gurney flap. At the rear window area, low-drag louver vents can be trimmed out to allow for efficient engine cooling if required. The Hyper-SS meets all 1/8th GT Global Body Spec rules and is already approved for IFMAR competition at the upcoming World Championship

This body fits popular 1:8 GT cars with the shorter (GT1) wheelbase of 325mm, and comes with rear wing, nylon wing mounting hardware, decal sheet, window masks, and overspray film. It is available in 2 weights of high-quality polycarbonate: Regular Weight (1mm) and Light Weight (.75mm) for expert racers only.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only.
Click Here for painting tips

Search:
1572-30 | Hyper-SS Light Weight Clear Body
1572-40 | Hyper-SS Regular Weight Clear Body

Features

High Downforce, Low-CG Aerodynamics
1:1 Hypercar-insprired styling
Low-drag louver vents for efficient cooling
Rear wing with molded-in Gurney flap
Global Body Spec Compliant & IFMAR Approved
Made in the USA

What's Included

Clear Hyper-SS Body
Clear Hyper-SS Wing
Wing Hardware (6 pcs)
Decal Sheet
Window Masks
Paint-then-peel Oversrpay Film

Fits

1:8 GT - 325mm Wheelbase

Specs

Length: 610mm
Width: 311mm
Wheelbase: 325mm
statt UVP des Herstellers 54,95 €
49,46
Sie sparen 5,49 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /20.04.