Drucken

Team Associated

Team Associated


Anzeige pro Seite
Sortieren nach
Artikel-Nr.: TA-90012
RC10B6D Team Kit

2WD im Maßstab 1:10 ist seit der Veröffentlichung des ersten RC10 in 1984 die Referenzklasse von Team Associated. Die Team Associated RC10 Buggys haben 12 von 16 I.F.M.A.R. Weltmeisterschaften gewonnen, seit es diese Klasse gibt. Um es auf den Punkt zu bringen, jeder RC10 2WD Buggy der jemals von Team Associated veröffentlicht wurde, hat die I.F.M.A.R. World Championship mindestens einmal gewonnen!

Heutzutage bestimmt die Bodenhaftung der Strecke das Setup deines Racers mehr denn je! Mit den neuen B6 und B6D Konfigurationen wird es noch einfacher das Podium zu erklimmen. Aus der Box heraus liefert der B6 ein ideales Setup für Strecken mit hohem bis sehr hohem Grip, wohingegen der B6D auf Strecken mit wenig bis mittlerem Grip zum Einsatz kommen wird. Es war noch nie einfacher auf unterschiedlichen Strecken, oder bei sich stark ändernden Griffverhältnissen, Rennen zu bestreiten; Setups und Tuningteile sind zwischen beiden Konfigurationen austauschbar, was die B6 Plattform extrem variabel macht. Beide Konfigurationen kommen mit Geschwindigkeit, Haltbarkeit und einer Abstimmung, wie man sie von einem wahren Champion erwarten kann. Wähle einfach die Konfiguration, die am besten zu Deiner Strecke passt und besiege die Konkurrenz!

Hinweis:
RC10B6 und RC10B6D sind Team Kits. NICHT beinhaltet sind: Motor, Akku, Regler, Servo, Empfänger, Felgen, Reifen, Zahnräder. Die Karosserie ist transparent. Zusammenbau und Lackieren sind nötig.


Features
Rasen/Teppich/Lehm Konfiguration
Aufgerichtetes 3-Gang Getriebe. Mehr nach hinten gerichtetes Gewicht für verbesserte Traktion
Kugel-Differential: Mehr Hecktraktion und Stabilität
Abgeflachte Frontschwingen, schmale Dämpferbrücke, feinfüligere Lenkung und schnellere Beschleunigung aus Kurven
Dämpfer können an der Vorderseite oder Rückseite der hinteren Schwingen befestigt werden
Harteloxiertes, mit Ausfräsungen versehenes Chassis. Optionale Gewichte (nicht enthalten) ermöglichen eine Verlagerung des Schwerpunktes.
Zentrierte Motorposition für optimale Seitenbalance
Neuangeordnete A-Platte für maximale Frontbodenfeiheit
Einteilige Lenkhebel mit angeschraubter Ackermann Platte
Schwingenhalter und obere Lenkerhalterung aus leichtem und haltbaren Aluminium
Überarbeitete Kugelpfannen und Spurstangen für präzise Anpassungen und Haltbarkeit
Einstellbare Batteriehalterung ermöglicht die Verlagerung des Schwerpunktes
Vorderachse und Radmitnehmer hinten aus Alu für weniger rotierende Masse und maximale Haltbarkeit
V2 12mm „Big Bore“ Aluminium-Gewindestoßdämpfer mit TiN beschichteten 3mm Kolbenstangen und reibungsarmen X-Ringen für weicheres Ansprechverhalten
Factory Team Aluminium Dämpferbuchsen sorgen für eine stabile Dämpferhalterung
Heavy-Duty Hinterachse für maximale Stabilität
Verbesserte Factory Team Kugellager
Transparente Team Associated Karosserie und angeschraubter Heckflügel von JConcepts™

statt UVP des Herstellers 339,99 €
300,28
Sie sparen 39,71 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TA-20150
SC28 Ready-to-Run Lucas Oil Edition

Der kleine Short Course Truck im Maßstab 1:28 bringt alles mit, was benötigt wird, um dein Wohnzimmer zu erobern. Fertig aufgebaut inkl. Fernbedienung mit integriertem Ladegerät und wieder aufladbarem Akku, ist der knapp 20cm lange Truck jederzeit bereit für das nächste Rennen um den Couchtisch. Dank des kraftvollen Motors und der vollproportionalen Lenkung lässt sich dieses vollwertige RC Fahrzeug schnell und präzise auch um die anspruchsvollsten Strecken manövrieren.

Die aufregende neue „Qualifier“-Serie von Team Associated richtet sich an Einsteiger, die Wert auf hohe Qualität und perfekte Fahreigenschaften legen. Wenn eine tolle Optik und hohe Leistung mit Qualitätsmerkmalen und attraktiver Preisgestaltung kombiniert werden, wird es zum ultimativen Funprodukt. Wenn all dies dann noch von einem Unternehmen wie Team Associated angeboten wird, ist es nicht weniger als „awesome“.

Features:

Alles im Lieferumfang enthalten - einfach aufladen und los!
Carl Renezeder Short Course Truck Karosserie
2,4 GHz 2-Kanal-Sender
Integrierte ESC / Empfängereinheit
Integriertes proportionales Servo

Spezifikationen:

Energiequelle: Elektrisch
Gelände: Offroad
Aufbauart: Short Course Truck
Maßstab: 1:28
Aufbau: RTR
Länge x Breite: 175mm x 96,5mm
Radstand: 99.1mm
Gewicht: 100.6g
Antrieb: 2WD

statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20151
Everything included! Just charge and drive!

We've reduced Team Associated's classic RC10T stadium truck to small-scale size -- while keeping all the RC fun and excitement! The RC28T Race Truck allows you to drive this replica around the corners, over the jumps, and across the finish line! No wall outlet needed -- just recharge right from the transmitter.

The 1:28 scale series is Team Associated's exciting new line of products that are designed to be FUN above all else, yet are lower cost, easy to use, durable, and provide an easy way to get into the RC hobby. When great looks are combined with quality features and value pricing, it becomes the ultimate product. When all this is offered from a company like Team Associated, it's nothing short of awesome.

Features

Everything included in the box -- just charge and go!
2.4GHz 2-channel transmitter
Integrated ESC/Receiver Unit
Integrated proportional servo
1:28 RC10T replica body


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 147mm (5.79in)
Width: 93mm (3.66in)
Wheelbase: 99.1mm (3.9in)
Weight: 90g (0.2lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20152
RC28 Ready-to-Run
The Team Associated's RC28 is a scale replica of the iconic RC10 Team Kit! This RC28 looks great and drives smooth thanks to a powerful electric motor and capable drivetrain.


The NEW Team Associated's RC28 is a scale replica of the iconic RC10 Team Kit! This RC28 looks great and drives smooth thanks to a powerful electric motor and capable drivetrain.

The included 2.4 GHz transmitter allows complete control enabling you to navigate around, through and over obstacles with ease! With its off-road stance and rubber tires, the RC28 handles like no other vehicle in its category.

After the vehicle's integrated battery becomes discharged, the convenient built-in transmitter charger makes it easy to get back to full power and ready to run in less than an hour. A built-in rechargeable battery and 4 AA's are included, so it is ready to go right out of the box! Just charge and drive!

Features

Everything included in the box -- just charge and go!
2.4GHz 2-channel transmitter
Integrated ESC/Receiver Unit
Integrated proportional servo
1:28 original RC10 replica body

Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 143mm (5.63in)
Width: 86mm (3.39in)
Wheelbase: 101.5mm (4in)
Weight: 76.2g (0.17lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-21427
This part fits the following vehicles:

SC28
SC28 Fox

statt UVP des Herstellers 17,59 €
16,49
Sie sparen 1,10 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-70015

In the world of short-course off road racing, RJ Anderson has become one of the youngest pro-class champions in the history of the sport. Alongside his championships in the Pro UTV and Pro-lite classes, he has also won the Super-Lite Challenge Cup. RJ is always pushing to be the best and nothing short of winning is his goal. His passion for winning has awarded him UTV Driver of the Year, TORC Series Rookie of the Year, and even Pro2 Rookie of the Year. Now joining the Rockstar Energy family, there is no doubt that RJ Anderson is nothing short of a success in off-road racing.

Team Associated's new 2WD ProSC10 is a Ready-To-Run RC replica of the truck driven by RJ Anderson in the Lucas Oil Off Road Racing Series. The ProSC10 features a rear motor short-course chassis that utilizes many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminum big bore coil-over shocks, a sealed-gear differential, and heavy-duty CVA driveshafts are all features that come standard on the ProSC10. A powerful water-resistant Reedy electronic speed controller and 3300Kv electric motor power the ProSC10 for high-speed fun. To handle the power, the ProSC10 comes equipped with realistic wheels and tires specifically made to handle any off-road condition.

A 2.4GHz 2-channel radio system featuring a DVC (Dynamic Vehicle Control) receiver also comes standard in the ProSC10. Protected by the water-resistant enclosed receiver box, the DVC system improves stability in all terrain conditions by automatically counter-steering when the vehicle starts to slide. With a metal-gear high-torque Reedy servo rounding out the electronics package, the ProSC10 is nothing short of a success in RC off-road racing.

Comparison Chart
Model VersionElectronics Included
Part #NameMotorRadio, Servo, ESC, ReceiverChargerBattery
#70015ProSC10 Rockstar RTRbrushlessincludednonenone
#70015CProSC10 Rockstar RTR Brushless LiPo CombobrushlessincludedincludedLiPo

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as batteries.
Due to ongoing R&D, photos may not match final kit. #70016 vehicle shown on these pages equipped with item NOT included in vehicle: Reedy battery. #70016C Combo includes battery.

Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
High-torque, metal-gear Reedy Servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Factory-finished short-course racing truck body
Water-resistant enclosed receiver box
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
Metric hardware throughout
14 precision rubber-sealed ball bearings
Durable front and rear body mounts
Rear CVA drive shafts for more reliability
Aluminum 12mm big bore coil-over shock absorbers
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Fully adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!
Combo #70015C includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug



Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1928.6g (4.25lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#70015, #70015C: Four (4) AA batteries (#302 Reedy AA Alkaline) used in the transmitter
#70015: NiMH or LiPo battery with High Current T-Plug (#724 Reedy 7-cell WolfPack or #751 Reedy WolfPack LiPo recommended)
#70015: Charger for battery used (#27201 Reedy balance Charger - good for LiPo, LiFe - recommended)

statt UVP des Herstellers 299,99 €
284,62
Sie sparen 15,37 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-70016

Team Associated's new ProSC10 is a Ready-To-Run RC replica of the Pro 2 trucks driven in the Lucas Oil Off Road Racing Series. The ProSC10 features a rear motor short-course chassis that utilizes many of the same parts from the widely successful RC10SC5M platform. Adjustable aluminum big bore coil-over shocks, a sealed-gear differential, and heavy-duty CVA driveshafts are all features that come standard on the ProSC10. A powerful water-resistant Reedy electronic speed controller and 3300kv electric motor power the ProSC10 for hours of high speed fun. To handle the power, the ProSC10 comes equipped with realistic Method(tm) Race Wheels and tires specifically made to handle any off-road condition.

A 2.4GHz 2-channel radio system featuring a DVC (Dynamic Vehicle Control) receiver also comes standard in the ProSC10. Protected by the water-resistant enclosed receiver box, the DVC system improves stability in all terrain conditions by automatically counter-steering when the vehicle starts to slide. With a metal-gear high-torque Reedy servo rounding out the electronics package, the ProSC10 is nothing short of a success in RC off-road racing.

Comparison Chart
Model VersionElectronics Included
Part #NameMotorRadio, Servo, ESC, ReceiverChargerBattery
#70016ProSC10 AE Team RTRbrushlessincludednonenone
#70016CProSC10 AE Team RTR Brushless LiPo CombobrushlessincludedincludedLiPo

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as batteries.
Due to ongoing R&D, photos may not match final kit. #70016 vehicle shown on these pages equipped with item NOT included in vehicle: Reedy battery. #70016C Combo includes battery.

Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
High-torque, metal-gear Reedy Servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Factory-finished short-course racing truck body
Water-resistant enclosed receiver box
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
Metric hardware throughout
14 precision rubber-sealed ball bearings
Durable front and rear body mounts
Rear CVA drive shafts for more reliability
Aluminum 12mm big bore coil-over shock absorbers
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Fully adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!
Combo #70016C includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 538mm (21.18in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1928.6g (4.25lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#70016, 70016C: Four (4) AA batteries (#302 Reedy AA Alkaline) used in the transmitter
#70016: NiMH or LiPo battery with High Current T-Plug (#724 Reedy 7-cell WolfPack or #751 Reedy WolfPack LiPo recommended)
#70016: Charger for battery used (#27201 Reedy balance Charger - good for LiPo, LiFe - recommended)

statt UVP des Herstellers 299,99 €
284,62
Sie sparen 15,37 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-70019

Starting life as a 1937 International shell, the full-scale Trophy Rat has gone over 1,500 man hours (and counting) from conceptualization to completion. The goal for this build was to accomplish the perfect blend between a trophy truck and a rat rod with an LS6 Corvette engine for a heart. Something that could be used as a daily driver, but also take to the King of Hammers or local road course.

Team Associated's Ready-To-Run 1:10 replica of Northrup Fabrication's Trophy Rat is wrapped around the chassis and engineering of the 9-time R.O.A.R. Short Course National Championship-winning truck. The Trophy Rat is both all show and all go!

The truck features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro which allows vehicle stability to be adjusted to flow with the terrain. A Reedy metal-gear digital high-torque servo and LED lights front and rear round out the Trophy Rat!

The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox now comes with a heavy-duty sealed-gear differential and externally adjustable V2 slipper clutch. 86mm CVA driveshafts increase traction and chassis support. Hex-drive wheels come standard on the Trophy Rat with realistic off road wheels and tires to keep the truck gripping the ground.

#70019C Trophy Rat RTR Brushless LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug

Comparison Chart
Model VersionElectronics Included
Part #NameMotorRadio, Servo, ESC, ReceiverChargerBattery
#70019Trophy Rat RTRbrushlessincludednonenone
#70019CTrophy Rat RTR Brushless LiPo CombobrushlessincludedCompact Balance ChargerLiPo

Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver; featuring built-in adjustable gyro
High-torque, metal-gear Reedy Servo with spring style servo saver
Powerful Reedy 3300kV Brushless motor
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Realistic Trophy Rat Body based on the Northrup Fabrication's "Trophy Rat"
Realistic Method Wheels with 12mm front and rear hex-drive nuts
Four integrated LEDs included, 2 front, 2 rear
Water-resistant enclosed receiver box
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
Metric hardware throughout
14 precision rubber-sealed ball bearings
Durable front and rear body mounts
Rear CVA drive shafts for more reliability
Aluminum 12mm big bore coil-over shock absorbers
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Fully adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!
Combo #70019C includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 481mm (18.94in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1834g (4.04lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#70019 and 70019C: Four (4) AA batteries (#302 Reedy AA Alkaline) used in the transmitter
#70019: NiMH or LiPo battery with High Current T-Plug (#724 Reedy 7-cell WolfPack or #751 Reedy WolfPack LiPo recommended)
#70019: Charger for battery used (#27201 Reedy balance Charger - good for LiPo, LiFe - recommended)

statt UVP des Herstellers 299,99 €
284,62
Sie sparen 15,37 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-90040
Team Associated's Reflex DB10 is a Ready-To-Run RC electric desert buggy based on the 9-time R.O.A.R. Short Course National Championship-winning truck.


Team Associated's Reflex DB10 is a Ready-To-Run RC electric desert buggy based on the 9-time R.O.A.R. Short Course National Championship-winning truck. The Reflex DB10 is both all show and all go! It features some major upgrades not normally found in RTRs: a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro which allows vehicle stability to be adjusted to flow with the terrain. A Reedy metal-gear digital high-torque servo and LED lights front and rear round out the Reflex DB10!

The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox now comes with a heavy-duty sealed-gear differential and externally adjustable V2 slipper clutch. 86mm CVA driveshafts increase traction and chassis support. Hex-drive, realistic off road wheels and tires, to keep the desert buggy gripping the ground, come standard on the Reflex DB10.

Comparison Chart
Model VersionElectronics Included
Part #NameMotorRadio, Servo, ESC, ReceiverChargerBattery
#90040Reflex DB10 RTRbrushlessincludednonenone
#90040CReflex DB10 RTR Brushless LiPo CombobrushlessincludedCompact Balance ChargerLiPo

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as batteries.
Due to ongoing R&D, photos may not match final kit. #90040 vehicle shown on these pages equipped with item NOT included in vehicle: Reedy battery. #90040 Combo includes battery.

Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform, with rear motor design
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
High-torque, metal-gear Reedy servo with spring-style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Factory-finished off road desert buggy body
Realistic Method Wheels with 12mm front and rear hex-drive nuts
Four integrated LED's included, 2 front, 2 rear
Water-resistant enclosed receiver box
Aluminum 12mm big bore coil-over shock absorbers
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
Metric hardware throughout
14 precision rubber-sealed ball bearings
Durable front and rear body mounts
Rugged steel turnbuckles for adjustable camber and front toe-in
Fully adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Rear CVA drive shafts for more reliability
Many Factory Team options already available!
Combo #90040C includes a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 481mm (18.94in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1855g (4.09lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#90040 and 90040C: Four (4) AA batteries (#302 Reedy AA Alkaline) used in the transmitter
#90040: NiMH or LiPo battery with High Current T-Plug (#724 Reedy 7-cell WolfPack or #751 Reedy WolfPack LiPo recommended)
#90040: Charger for battery used (#27201 Reedy balance Charger - good for LiPo, LiFe - recommended)

statt UVP des Herstellers 299,99 €
284,62
Sie sparen 15,37 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-80937
The RC8T3.1 has been overhauled with the latest upgrades from Team Associated! Many of the same winning features of the B3.1 have been integrated into this latest generation of the Team Associated T3 platform. The updates make the truck easier to drive, more consistent lap after lap, and are sure to make the new T3.1 a winner under any conditions.

The Area 51 engineers refined the suspension framework while also increasing durability and consistency on the track. An expansive line of option parts allows the RC8T3.1 to be tuned for specific driver demands and varying conditions.

Please click for full vehicle details, including complete feature list, specs, more photos, and items required for operation.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: engine, exhaust system, Reedy Power #27107 RT2207A servos, wheels and tires. Assembly and painting required.

Features

New 4-shoe clutch provides precise power transfer and is easy to maintain. Optional spring rates and clutch bells allow custom tuning for varying grip levels.
V3 differentials with H.T.C. (High Torque Capacity) internal gears offer increased fluid capacity and more consistent feel lap after lap
133mm CVA driveshafts increase traction and chassis support
Suspension arms have been updated to race specs
Strengthened front upper suspension arm for improved durability
Updated gearbox reduces differential movement for a more consistent gear mesh
All suspension arm pivots have been revised for more ground clearance, resulting in better jumping and landing while also improving durability
16mm Big Bore 6061 aluminum shock bodies with bleeder-style caps
20mm I.D. shock springs for optimal spring rates
+2mm steering block arms included for a smooth and precise steering feel
Highly efficient drivetrain utilizes straight-cut bevel gears to provide great acceleration and run time
Improved servo saver assembly
Hard-anodized 7075 aluminum chassis with keyed lower suspension plates
Pro-Line(r) Predator body included
Enclosed receiver box
Full Factory Team rubber-sealed ball bearings
Easily accessible front and rear differentials
High parts compatibility with RC8B3.1e, RC8B3.1, and RC8T3.1e models, offering the perfect solution for multi-class racers



Vehicle Specifications
Power Source: Nitro Fuel
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:8 Scale
Assembly Level: Kit*
Length: 560mm (22.05in)
Width: varies
Wheelbase: 376.5mm (14.82in)
Weight: varies
Drive: 4WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

.21-.28 class rear exhaust engine
Exhaust system: muffler and header joining pack, or muffler spring
2-channel radio/transmitter/receiver set with switch - FM/PCM/2.4GHz recommended
Transmitter batteries
4.8-7.4v receiver battery pack: 1) flat style NiMH battery; 2) either 1600mAh LiPo or 2100mAh LiPo or 1700 LiFe battery recommended
Model car fuel (30% nitro recommended)
Fuel bottle
Glow igniter
Starter box
1:8 scale truggy tires
1:8 scale truggy wheels
CA (cyanoacrylate) glue
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Thread-locking compound
Needle-nose pliers
Hobby knife
Reamer or hole punch for making holes in body
Ride height gauge
Steering servo: Reedy RT2207A recommended
Throttle servo: Reedy RS1806A recommended

statt UVP des Herstellers 609,99 €
596,27
Sie sparen 13,72 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-80938

1:8 Scale 4WD Electric Off-Road Competition Truck Kit

The RC8T3.1e is Team Associated's latest iteration of the 1:8 electric truck, sharing many of the same winning features found on the new T3.1! The updated components make the truck easier to drive, more consistent, and are sure to make the T3.1e a winner under any race condition. The T3.1e is the perfect platform for any racer looking to add a 1:8 electric truck to their arsenal.

The Area 51 engineers have optimized the suspension geometry while also increasing durability and consistency on the track. A continuing line of option parts allow the RC8T3.1e to be tuned for specific driver demands and varying conditions.

Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: #27407 Reedy motor, #27328 Reedy battery, #27008 Reedy ESC, #27106 Reedy servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.

Features

New V3 differentials offer increased fluid capacity and more consistent feel lap after lap CVA driveshafts increase traction and chassis support
Suspension arms have been updated to race specs
All suspension arm pivots have been revised for more ground clearance, resulting in better jumping and landing while also improving durability
16mm Big Bore 6061 aluminum shock bodies and caps with bleeder style caps
20mm I.D. shock springs for optimal spring rates
+2mm steering block arms included for a smooth and precise steering feel
Highly efficient drivetrain utilizes straight-cut bevel gears to provide great acceleration and run time
Improved servo saver assembly
Hard-anodized 7075 aluminum chassis with keyed lower suspension plates
Pro-Line(r) Predator body included
Enclosed receiver box
Full Factory Team rubber-sealed ball bearings
Easily accessible front and rear differentials
Two-piece sliding motor mount for easy gear mesh adjustment and motor removal
High parts compatibility with the RC8B3.1, RC8B3.1e, and RC8T3.1 models, offering the perfect solution for multi-class racers



Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:8 Scale
Assembly Level: Kit*
Length: 560mm (22.05in)
Width: varies
Wheelbase: 376.5mm (14.82in)
Weight: varies
Drive: 4WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

2-channel radio/transmitter -- FM/PCM/2.4GHz recommended
Transmitter batteries
4S LiPo battery and charger
1:8 scale speed control
1:8 scale motor
Pinion gear (see motor manufacturer's gearing recommendations for correct pinion size) High-torque steering servo
1:8 scale truggy wheels and tires
CA (Cyanoacrylate) glue
Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
Tools: Needle nose pliers, Hobby knife, Reamer/hole punch, Ride Height Gauge
High-torque steering servo

statt UVP des Herstellers 559,99 €
547,39
Sie sparen 12,60 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-80941
Building the industry's most dependable ready-to-run radio controlled vehicles is something we take great pride in. We've earned this reputation for quality, and we'll make no compromises to uphold it. The Limited Edition Nomad DB8 is no exception, packed with the technology to bring fun to your backyard, outdoor trails, and everything in between.

Born from the sand and destined to roam the earth, the Nomad DB8 is a tough, powerful, all-terrain dominating Desert Buggy based on the race-proven RC8 platform's unprecedented balance and incredible cornering performance. The Nomad DB8 form follows function with a durable impact-resistant roll cage, detailed interior, driver and co-pilot figures, painted body panels, and runs off a powerful Reedy brushless motor. To tame the unforgiving landscape, high-grip General Tire GT(R) Grabbers are wrapped around rich-looking black 17mm hex wheels.
This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as battery pack.
Due to ongoing R&D, photos may not match final vehicle. Nomad DB8 RTR shown on these pages equipped with items NOT included in kit: Reedy LiPo battery pack with T-plug connector.

Check out the AE Garage app for interactive exploration of this vehicle!

Comparison Chart
Model VersionElectronics Included
Part #NameMotorRadio, Servo, ESC, ReceiverChargerBattery
#80941Limited Edition Nomad DB8 Ready-To-Runbrushlessincludednonenone
#80941CLimited Edition Nomad DB8 Brushless RTR LiPo CombobrushlessincludedCompact Balance ChargerLiPo


General Tire GT(R) and Grabber(TM) are trademarks of CONTINENTAL TIRE NORTH AMERICA, INC. CORPORATION

Features

The Nomad DB8 uses a strong and efficient metal-gear 4WD drivetrain to send power to the ground. Managing that power are tunable front, center and rear fluid-filled differentials and Grabber(TM) tires.
Smoothing out the forbidding terrain is the same durable, tuned and proven suspension used on the RC8 line of vehicles.
Dampening the rough landscape are four oil-filled shocks designed for smooth and consistent operation.
At the heart of this nomadic desert buggy are Team Associated's XP and Reedy electronics. All are installed in the DB8 chassis, allowing easy access to the receiver, steering servo and the new 4s Reedy electronic speed control (with reverse).
Two screen-printed body color schemes are available. Bodies are mounted to a roll cage, with a detailed driver and co-pilot.
Water-resistant enclosed receiver box.
Combo #80941C includes a Reedy LiPo Charger and Reedy LiPo Battery with T-plug


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:8 Scale
Assembly Level: Ready-To-Run*
Length: 505mm (19.88in)
Width: varies
Wheelbase: varies
Weight: varies
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

Transmitter batteries x4 AA (#302 recommended)
#80941: 4S 14.8v LiPo battery pack with T-plug connector (AE #756, #757 or #318)
#80941: Battery charger (peak detection charger recommended) (AE #27201, or 27200)

statt UVP des Herstellers 559,99 €
531,29
Sie sparen 28,70 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-40001
1:12 Scale Ready-To-Run Electric 4X4 Off Road Pick-Up Truck

The CR12 Trail Series 4x4 truck may be small in size, but it is packed full of features. This rig comes Ready-To-Run with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you're ready to hit the trails!

Designed not only for scale looks with realistic wheels, tires and a licensed Ford F-150 Pick-Up body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, front steel CVA axles, and includes metal-shield ball bearings.

Get ready to hit the trails -- and look good while doing it -- with the CR12 Trail Series 4x4 truck!

Ford Motor Company Trademarks and Trade Dress are used under license.

Features

Metal front CVA and rear solid axle shafts with 12mm hex adapters
Metal 4-link front and rear suspension
Fully adjustable, threaded, fluid-filled shocks
Chassis-mounted steering (CMS) servo
13.98:1 ratio 3-gear transmission with integrated motor mount
16-piece metal-shield ball bearing set
2.4GHz XP transmitter and receiver
Water-resistant Reedy Power speed control with high-current T-plug connector
850mAh Li-Ion 7.4V 2-cell battery and USB charger
Reedy brushed 380 motor
Black anodized aluminum battery/radio tray with hook and loop hold-down strap
Spring-loaded, heavy-duty servo saver
Official Licensed 1980 Ford F-150 custom Flareside body. Two body colors to choose from.
Chrome-plated front/rear bumpers and grill
4-piece High Intensity LED Set
Chrome-plated scale 1.55 wheels with soft compound off-road tires


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 372mm (14.65in)
Width: 178mm (7.01in)
Wheelbase: 225mm (8.86in)
Weight: 1110g (2.45lbs)
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 219,99 €
208,71
Sie sparen 11,28 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-40002
1:12 Scale Ready-To-Run Electric 4X4 Off Road Pick-Up Truck

The CR12 Trail Series 4x4 truck may be small in size, but it is packed full of features. This rig comes Ready-To-Run with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you're ready to hit the trails!

Designed not only for scale looks with realistic wheels, tires and a licensed Ford F-150 Pick-Up body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, front steel CVA axles, and includes metal-shield ball bearings.

Get ready to hit the trails -- and look good while doing it -- with the CR12 Trail Series 4x4 truck!

Ford Motor Company Trademarks and Trade Dress are used under license.

Features

Metal front CVA and rear solid axle shafts with 12mm hex adapters
Metal 4-link front and rear suspension
Fully adjustable, threaded, fluid-filled shocks
Chassis-mounted steering (CMS) servo
13.98:1 ratio 3-gear transmission with integrated motor mount
16-piece metal-shield ball bearing set
2.4GHz XP transmitter and receiver
Water-resistant Reedy Power speed control with high-current T-plug connector
850mAh Li-Ion 7.4V 2-cell battery and USB charger
Reedy brushed 380 motor
Black anodized aluminum battery/radio tray with hook and loop hold-down strap
Spring-loaded, heavy-duty servo saver
Official Licensed 1980 Ford F-150 custom Flareside body. Two body colors to choose from.
Chrome-plated front/rear bumpers and grill
4-piece High Intensity LED Set
Chrome-plated scale 1.55 wheels with soft compound off-road tires


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 372mm (14.65in)
Width: 178mm (7.01in)
Wheelbase: 225mm (8.86in)
Weight: 1110g (2.45lbs)
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 219,99 €
208,71
Sie sparen 11,28 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-70002
Race-winning heritage.Based on Team Associated's RC10B6.1 platform, the RC10T6.1 Team Kit represents the next step in the evolution for competitive truck racing. The RC10T6.1 Team Kit began life with the many great advantages already learned through the development of the RC10B6.1. Armed with extensive feedback from racers like you, the engineers behind the doors of Team Associated's Area 51 set off to design the ultimate truck chassis utilizing every advantage possible.

Designed to win. The RC10T6.1 shares key components with the RC10B6.1 and RC10B6.1D Team Kits, making it easier than ever to run multiple classes at the same time. Like the RC10B6.1, the RC10T6.1 has new features such as an easy-access differential with height adjustment, an all-new slipper assembly, and the speed, durability and lineage expected of a true champion.

The RC10T6.1 has been designed and built to the highest standard to give racers an edge over the competition.

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy #27402 motor, #27322 battery, #27005 ESC, #27101 servo, receiver, wheels, tires, and pinion gear. Assembly and painting required.

Features

Layback Stealth(R) transmission included for lower and more rearward CG
Easy access to ball differential
Differential height adjustment with included 0, 1, 2, and 3mm inserts
New slipper assembly for better weight balance and shock clearance
Innovative rear arm with molded inserts for ultra-fine lower shock mounting adjustments
Machined pistons included for better fit and smoother operation
Aluminum C and D arm mounts included for a large range of anti-squat and toe adjustments
Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
Reverse bellcrank steering allows more room for mounting electronics
Bolt-on steering block arms for easy Ackermann adjustments
Precision-ground steering bellcrank screws to reduce steering slop
Aluminum rear ballstud mount for added strength
7.0mm aluminum rear clamping hex with laser etching
Heavy-duty ball cups and ballstuds allow for maximum suspension travel while reducing binding and friction
Pro-Line(R) Enforcer body included
Front and rear anti-roll bar integration makes tuning easy
Heavy-duty routed graphite shock towers
Heavy-duty rear axle with 91mm CVA bones
Lightweight, hard-anodized aluminum chassis with centralized mass for improved handling on all track types
V2 12mm "Big Bore" threaded aluminum shocks with 3mm shafts and X-rings for improved smoothness
One-piece shock bushing to make assembly easier
Lightweight aluminum top shaft
Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 368mm (14.49in)
Width: varies
Wheelbase: 288mm (11.34in)
Weight: varies
Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

1:10 scale 540-size electric motor
1:10 scale electronic speed control
7.4V LiPo or 6.6V LiFe shorty pack battery
Battery charger (able to charge one of the batteries mentioned above)
2-channel surface transmitter, and its batteries
2-channel receiver
Steering servo
Pinion gear (48 pitch)
Spray paint for Polycarbonate body
1:10 scale 12mm hex truck wheels
1:10 scale truck tires
Glue for tires and wheels

statt UVP des Herstellers 339,99 €
332,34
Sie sparen 7,65 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-70007
1:10 Scale 2WD Off Road Electric Short Course Truck Kit

Race-winning heritage. Based on Team Associated's RC10T6.1 platform, the RC10SC6.1 Team Kit represents the next step in the evolution for competitive short-course racing. The RC10SC6.1 Team Kit began life with the many great advantages already learned through the development of the RC10B6.1 and RC10T6.1. Starting with acquired data, the engineers behind the doors of Team Associated's Area 51 set off to design the ultimate short-course truck chassis utilizing every advantage possible.

Designed to win. The RC10SC6.1 shares key components with the RC10B6.1, RC10B6.1D, and RC10T6.1 Team Kits, making it easier than ever to run multiple classes at the same time. Like the RC10T6.1, the RC10SC6.1 has new features such as an easy-access differential with height adjustment, an all-new slipper assembly, and the speed, durability and lineage expected of a true champion.

The RC10SC6.1 has been designed and built to the highest standard to give racers an edge over the competition.
This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy #260 motor, #27323 battery, #27004 ESC, #27101 servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.

Features

Lay Back Stealth(R) transmission included for lower and more rearward CG
Easy access to ball differential
Differential height adjustment with included 0, 1, 2, and 3mm inserts
New slipper assembly for better weight balance and shock clearance
Innovative rear arm with molded inserts for ultra-fine lower shock mounting adjustments
Machined pistons included for better fit and smoother operation
Aluminum C and D arm mounts included for large range of anti-squat and toe adjustments
Rear hubs feature large bearings and the easy-insert system to adjust camber link position and rear axle height
Reverse bellcrank steering allows more room for mounting electronics
Bolt-on steering block arms for easy Ackermann adjustments
Precision-ground steering bellcrank screws to reduce steering slop
Aluminum rear ballstud mount for added strength
7.0mm aluminum rear clamping hex with laser etching
Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and friction
Durable molded front and rear bumpers
Front and rear anti-roll bar integration makes tuning easy
Heavy-duty routed graphite shock towers
Heavy-duty rear axle with 91mm CVA bones
Lightweight, hard-anodized aluminum chassis with centralized mass for improved handling on all track types
V2 12mm Big Bore threaded aluminum shocks with 3mm shafts and X-rings for improved smoothness
One-piece shock bushing to make assembly easier
Lightweight aluminum top shaft
Factory Team upgraded ball bearing kit included (now oiled instead of greased for less drag)


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: varies
Wheelbase: 327mm (12.87in)
Weight: varies
Drive: 2WD
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

1:10 scale 540-size electric motor
1:10 scale electronic speed control
2-cell 7.4V LiPo "shorty" battery pack
Battery charger
2-channel surface transmitter, and its batteries
2-channel receiver
Steering servo
Pinion gear (48 pitch)
Polycarbonate-specific spray paint for body, body scissors
1:10 scale short course 12mm hex wheels
1:10 scale short course tires
CA glue for tires and wheels, thread-locking compound
1:10 scale short course body

statt UVP des Herstellers 329,99 €
322,57
Sie sparen 7,42 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20155
Small in scale but monstrously fun, Team Associated's MT28 1:28 scale electric RTR Monster Truck is here! This no-nonsense pint-sized monster truck looks great with its eye-catching graphics and drives smooth thanks to its powerful electric motor and capable drivetrain.

The included 2.4 GHz transmitter gives you complete control through and over obstacles with ease! With the increased ground clearance and rubber tires, the MT28 handles like no other vehicle in its category.

When your offroad thrills exhaust the vehicle's integrated battery, the convenient built-in transmitter charger makes it easy to get back to full power in less than an hour. A built-in rechargeable battery and 4 AAs are already included in the box! Just charge and drive!

Features

2.4GHz 2-channel transmitter
Integrated ESC/Receiver Unit
Integrated proportional servo
Team Associated body graphics already installed
Everything included! Just charge and drive!


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Monster Truck
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 147mm (5.79in)
Width: 93mm (3.66in)
Wheelbase: 99.1mm (3.9in)
Weight: 105.8g (0.23lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20156
JAMMIN' JAY -- 1985 IFMAR WORLD CHAMPION!

The NEW Team Associated RC28 is a scale replica of the iconic RC10 Jammin' Jay used to win the first-ever IFMAR 1:10 scale Off Road World Championships in 1985 at the Ranch Pit Shop in Del Mar, CA. This RC28 looks great and drives smooth thanks to a powerful electric motor and capable drivetrain.

The included 2.4GHz transmitter allows complete control, enabling you to navigate around, through, and over obstacles with ease! After the vehicle's integrated battery becomes discharged, the convenient built-in transmitter charger makes it easy to get back to full power and ready to run in less than an hour. A built-in rechargeable battery and 4 AA's are included, so it is ready to go right out of the box! Just charge and drive!

Features

Everything included in the box -- just charge and go!
2.4GHz 2-channel transmitter
Integrated ESC/Receiver unit
Integrated proportional servo
1:28 original RC10 Jammin' Jay 1985 IFMAR World Champion replica body


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 143mm (5.63in)
Width: 86mm (3.39in)
Wheelbase: 101.5mm (4in)
Weight: 76.2g (0.17lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-20175
Team Associated's 1:14 scale REFLEX 14B 4WD electric buggy comes out of the box already assembled, with a Reedy Power brushless speed control and motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power at your disposal, the buggy's design effortlessly channels it into 4WD fun! The adjustability offered by the turnbuckles, caster blocks, and rear hubs make the REFLEX 14B ready for any terrain you can throw at it. Additional features include three sealed differentials, aluminum steering rack, and lightweight aluminum center driveshaft. Adding a battery pack of your choice to the REFLEX 14B RTR, you can now have big performance in a small-scale Ready-to-Run package!

The #20175C REFLEX 14B Buggy RTR Combo has the added benefit of a Reedy 123-S Compact Balance Charger and Reedy LiPo battery pack included!


Features

2.4GHz 2-channel radio system
High-Torque Digital Servo with spring-style servo saver
Powerful Reedy 4500kV Brushless Motor
Water-resistant high-power Reedy brushless speed control with T-plug connector
Three sealed differentials
Threaded, coil-over shock absorbers
Adjustable turnbuckles
Adjustable inserts for caster blocks and rear hubs
Aluminum steering rack
Front universal driveshafts
Sleek and stylish race-inspired body
Molded tub chassis with covered center driveshaft
Aluminum center driveshaft
12mm drive hex



Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:14 Scale
Assembly Level: Assembled*
Length: 304mm (11.97in)
Width: 202mm (7.95in)
Wheelbase: varies
Weight: varies
Internal
Gear Ratio: 2.46:1
Drive: 4WD
* This vehicle comes assembled, but some additional items such as electronics and/or an engine/motor may be required.

Required to Complete

#20175: 2S LiPo battery with T-Plug connector fitting 100x30x20mm space (#27331 Reedy Wolfpack LiPo 1600mAh 30C 7.4V)
#20175: Suitable battery charger (#616 Reedy 423-S Compact Balance Charger)
#20175, 20175C: Four (4) AA batteries (#302 Reedy AA Alkaline Batteries)

statt UVP des Herstellers 189,99 €
180,26
Sie sparen 9,73 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20176
Team Associated's 1:14 scale REFLEX 14T 4WD electric truggy comes out of the box already assembled, with a Reedy Power brushless speed control, brushless motor, high-torque digital steering servo, and 2.4GHz radio system. With all that power at your disposal, the truggy's design effortlessly channels it into 4WD fun! The adjustability offered by the turnbuckles, caster blocks, and rear hubs make the REFLEX 14T ready for any terrain you can run on. Additional features include three sealed differentials, aluminum steering rack, and lightweight aluminum center driveshaft. Adding a battery pack of your choice to the REFLEX 14T RTR, you can now have big performance in a small-scale Ready-to-Run package! Think small. Win big.

The #20176C REFLEX 14T Truggy RTR Combo has the added benefit of a Reedy 123-S Compact Balance Charger and Reedy LiPo battery pack included!


Features

2.4GHz 2-channel radio system
High-Torque Digital Servo with spring-style servo saver
Powerful Reedy 4500kV Brushless Motor
Water-resistant, high-power, Reedy brushless speed control with T-plug connector
Three sealed differentials
Threaded, coil-over shock absorbers
Adjustable turnbuckles
Adjustable inserts for caster blocks and rear hubs
Aluminum steering rack
Front universal driveshafts
Sleek and stylish race-inspired body


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:14 Scale
Assembly Level: Ready-To-Run*
Length: 304mm (11.97in)
Width: 202mm (7.95in)
Wheelbase: varies
Weight: varies
Internal
Gear Ratio: 2.46:1
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#20176: 2S LiPo battery with T-Plug connector fitting 100x30x20mm space (#27331 Reedy Wolfpack LiPo 1600mAh 30C 7.4V)
#20176: Suitable battery charger (#616 Reedy 423-S Compact Balance Charger)
#20176, 20176C: Four (4) AA batteries (#302 Reedy AA Alkaline Batteries)

statt UVP des Herstellers 189,99 €
180,26
Sie sparen 9,73 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-90040P
Team Associated's Reflex DB10 is a Ready-To-Run RC electric desert buggy based on the 9-time R.O.A.R. Short Course National Championship-winning truck. The Reflex DB10 is both all show and all go! It features some major upgrades not normally found in RTRs: a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro which allows vehicle stability to be adjusted to flow with the terrain. A Reedy metal-gear digital high-torque servo and LED lights front and rear round out the Reflex DB10!

The suspension also received an upgrade with the addition of adjustable blue anodized aluminum V2 12mm big bore coil-over shocks. The gearbox now comes with a heavy-duty sealed-gear differential and externally adjustable V2 slipper clutch. 86mm CVA driveshafts increase traction and chassis support. Hex-drive, realistic off road wheels and tires, to keep the desert buggy gripping the ground, come standard on the Reflex DB10.


Features

Based on the 9-time R.O.A.R. National Champion short-course race truck platform, with rear motor design
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
High-torque, metal-gear Reedy servo with spring-style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Factory-finished off road desert buggy body
Realistic Method Wheels with 12mm front and rear hex-drive nuts
Four integrated LED's included, 2 front, 2 rear
Water-resistant enclosed receiver box
Aluminum 12mm big bore coil-over shock absorbers
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable V2 slipper clutch
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3s LiPo battery packs
Metric hardware throughout
14 precision rubber-sealed ball bearings
Durable front and rear body mounts
Rugged steel turnbuckles for adjustable camber and front toe-in
Fully adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Rear CVA drive shafts for more reliability
Many Factory Team options already available!
Combos #90040C, 90040PC include a Reedy Compact Balance Charger and Reedy 7.4V LiPo Battery with T-plug


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Ready-To-Run*
Length: 481mm (18.94in)
Width: 282mm (11.1in)
Wheelbase: 322mm (12.68in)
Weight: 1855g (4.09lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

Required to Complete

#90040, 90040C, 90040P, 90040PC: Four (4) AA batteries (#302 Reedy AA Alkaline) used in the transmitter
#90040, 90040P: NiMH or LiPo battery with High Current T-Plug (#724 Reedy 7-cell WolfPack or #751 Reedy WolfPack LiPo recommended)
#90040, 90040P: Charger for battery used (#27201 Reedy balance Charger - good for LiPo, LiFe - recommended)

statt UVP des Herstellers 299,99 €
284,62
Sie sparen 15,37 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-40003
1:12 Scale Ready-To-Run Electric 4X4 Off Road Pick-Up Truck

The CR12 Trail Series Scale 4x4 truck may be small in size, but it's packed full of features. This rig comes Ready-To-Run with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you're ready to hit the trails!

Designed not only for scale looks with realistic wheels, tires and 1977 Toyota FJ45 Pick-up body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal shield ball bearings throughout.

Get ready to hit the trails with the CR12 scale 4x4 truck!

Features

Official 1977 Toyota FJ45 body. Two body colors to choose from.
Satin silver front/rear bumpers and mirrors
Scale 1.55 black wheels with soft compound off-road tires
Chassis-mounted steering (CMS) servo
2.4GHz XP transmitter and receiver
Water-resistant Reedy Power speed control with high-current T-plug connector
Reedy brushed 380 motor
850mAh Li-Ion 7.4V 2-cell battery and charger
Spring-loaded heavy-duty servo saver
Metal front CVA and rear solid axle shafts with 12mm hex adapters
Metal 4-link front and rear suspension
Fully adjustable threaded fluid-filled shocks
13.98:1 ratio 3-gear transmission with integrated motor mount
Plastic low-friction slider-type drive shafts
16-piece metal-shield ball bearing set
Black anodized aluminum battery/radio tray with hook-and-loop hold-down strap
2-piece LED light set


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 372mm (14.65in)
Width: 178mm (7.01in)
Wheelbase: 225mm (8.86in)
Weight: 1110g (2.45lbs)
Internal
Gear Ratio: 13.98:1
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

statt UVP des Herstellers 219,99 €
208,71
Sie sparen 11,28 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-40004
1:12 Scale Ready-To-Run Electric 4X4 Off Road Pick-Up Truck

The CR12 Trail Series Scale 4x4 truck may be small in size, but it's packed full of features. This rig comes Ready-To-Run with Reedy Power electronics and meets S.O.R.R.C.A. class 1 and 2 rules right out of the box. No need to prep or build your rig; just charge it and you're ready to hit the trails!

Designed not only for scale looks with realistic wheels, tires and 1977 Toyota FJ45 Pick-up body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged little rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal shield ball bearings throughout.

Get ready to hit the trails with the CR12 scale 4x4 truck!

Features

Official 1977 Toyota FJ45 body. Two body colors to choose from.
Satin silver front/rear bumpers and mirrors
Scale 1.55 black wheels with soft compound off-road tires
Chassis-mounted steering (CMS) servo
2.4GHz XP transmitter and receiver
Water-resistant Reedy Power speed control with high-current T-plug connector
Reedy brushed 380 motor
850mAh Li-Ion 7.4V 2-cell battery and charger
Spring-loaded heavy-duty servo saver
Metal front CVA and rear solid axle shafts with 12mm hex adapters
Metal 4-link front and rear suspension
Fully adjustable threaded fluid-filled shocks
13.98:1 ratio 3-gear transmission with integrated motor mount
Plastic low-friction slider-type drive shafts
16-piece metal-shield ball bearing set
Black anodized aluminum battery/radio tray with hook-and-loop hold-down strap
2-piece LED light set


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 372mm (14.65in)
Width: 178mm (7.01in)
Wheelbase: 225mm (8.86in)
Weight: 1110g (2.45lbs)
Internal
Gear Ratio: 13.98:1
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 219,99 €
208,71
Sie sparen 11,28 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-40005

The CR12 Tioga Trail Truck may be small in size, but it's packed full of features. This 4x4 rig comes Ready-To-Run with Reedy Power electronics. No need to prep or build your rig; just charge it and you're ready to hit the trails!

Designed not only for scale looks with realistic wheels, tires and body, the CR12 is built for performance as well. The steel ladder frame chassis provides the perfect backbone for this rugged rig. The 4-link suspension, threaded shocks, and soft rubber tires give the grip and performance needed to climb over the roughest terrain. Transferring power to the rocks is a compact 3-gear transmission, plastic low-friction slider-type drive shafts, front steel CVA axles, and metal-shield ball bearings.

Features

Molded rear cage with hinged body mount
Off road style front bumper with 2-piece LED
Metal front CVA and rear solid axle shafts with 12mm hex adapters
Black anodized aluminum battery/radio tray with hook-and-loop hold down strap
Black scale 1.9 wheels with soft compound off road tires
Metal 4-link front and rear suspension
Fully adjustable, threaded, fluid-filled shocks
Chassis-mounted steering (CMS) servo
13.98:1 ratio 3-gear transmission with integrated motor mount
Plastic low-friction slider-type drive shafts
16-piece metal shield ball bearing set
2.4GHz XP transmitter and receiver
Water-resistant Reedy Power speed control with high-current T-plug connector
Reedy brushed 380 motor
850mah Li-Ion 7.4V 2-cell battery and charger


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:12 Scale
Assembly Level: Ready-To-Run*
Length: 395mm (15.55in)
Width: 201mm (7.91in)
Wheelbase: 225mm (8.86in)
Weight: 1218g (2.69lbs)
Internal
Gear Ratio: 13.98:1
Drive: 4WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 219,99 €
208,71
Sie sparen 11,28 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20157
Headquartered in Scotts Valley, CA, Fox Factory Holding Corp. ("FOX") designs and manufactures performance-defining ride dynamics products for bicycles, on-road and off-road vehicles and trucks, side-by-side vehicles, all-terrain vehicles, snowmobiles, specialty vehicles and applications, and motorcycles.

Team Associated is pleased to announce a new licensed version of the FOX SC28 short course body, featuring an orange paint scheme with the iconic FOX logo. The included 2.4GHz transmitter allows complete control, enabling you to navigate around, through, and over obstacles with ease! After the vehicle's integrated battery becomes discharged, the convenient built-in transmitter charger makes it easy to get back to full power and ready to run in less than an hour. A built-in rechargeable battery and 4 AA's are included, so it is ready to go right out of the box! Just charge and drive!

So grab a friend and create your own Short Course Truck Racing Series. Rip around the corners, fly over the jumps and speed across the finish line! Will you make it to the winner's circle?

FOX(R) is a registered trademark of Fox Factory Holding Corp.

Features

Everything included in the box -- just charge and go!
2.4GHz 2-channel transmitter
Integrated ESC/Receiver unit
Integrated proportional servo
FOX short course replica body


Vehicle Specifications
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:28 Scale
Assembly Level: Ready-To-Run*
Length: 175mm (6.89in)
Width: 89mm (3.5in)
Wheelbase: 99.1mm (3.9in)
Weight: 100.6g (0.22lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.

statt UVP des Herstellers 59,99 €
59,99

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.

Artikel-Nr.: TA-20170
NanoSport players will test their skills in a head-to-head face-off. Challengers strategically battle for possession of the ball or puck, while aggressively bashing and smashing into their opponent's cars. However, only one player can successfully take control and send the ball or puck into the goal. First team to score three goals wins! Everyone will love blasting into action with this interactive, strategic, skill-based sport set, with the quality and design you expect from Associated Electrics.

Players master skills and fuel creativity, while playing soccer, hockey and other sports with radio control cars in this NanoSport set. Amazing features include rechargeable batteries for the cars, adjustable throttle dual rate for speed management, and an assortment of optional accessories (optional accessories sold separately).

Package includes: 2 rechargeable cars, 2 transmitters/radios, 2 balls, 2 pucks and 8 AA batteries.


Features

Radio controlled NanoSport cars can be driven with precision at high speeds
Cars are recharged with charging cord from the transmitter/radio
Perfect for both beginner and advanced players
Enjoy the action of fast, fun and adrenaline head-to-head soccer and hockey games
Players are challenged to master team work, coordination, experimentation, and to overcome obstacles in this fast-paced game
Everything included! Just charge and drive!


Vehicle Specifications
Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:32 Scale
Assembly Level: Ready-To-Run*
Length: 177.5mm (6.99in)
Width: 84mm (3.31in)
Wheelbase: 75.75mm (2.98in)
Weight: 84g (0.19lbs)
Drive: 2WD
* This vehicle is fully assembled and ready to run right out of the box. Some models may require a battery and/or charger.
statt UVP des Herstellers 119,99 €
118,80
Sie sparen 1,19 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-5 Tage /06.07.

Artikel-Nr.: TA-90026
RC10B74 Team Kit

This completely new chassis design, equipped with a long list of features, is designed to give you the winning edge.


Team Associated is proud to introduce the newest 1:10 scale 4WD electric off-road buggy kit, the RC10B74!

The off-road RC car racing scene has taken a turn over the past couple years, with turf and carpet racing becoming more popular and grip levels at an all-time high. The engineers inside Team Associated's Area 51 were quick to address this trend in the 4WD class with the RC10B74 Team Kit. This completely new chassis design, equipped with a long list of features, is designed to give you the winning edge.

Competition levels are more extreme than ever, with several manufacturers producing competitive racing platforms. The RC10B74 was designed with focus on performance and durability. New features like the easy-access, quick-change differential height make tuning for different track surfaces and ride heights quicker than ever. 7075-T6 aluminum bulkheads and arm mounts provide precision and durability, while the updated shocks with increased stroke length allow for more consistent jumping and landing. Also included, an all new rear hub assembly with a modular vertical ball stud mount and axle height insert system to allow the finest roll center adjustments possible. With many other new features, the RC10B74 Team Kit gives you all the performance and adjustability necessary to keep you racing at the front of the pack.

This vehicle needs extra parts to make it operational. Click on the Specifications tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.

Due to ongoing R&D, photos may not match final kit. Vehicle shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, receiver, wheels, tires, body, and pinion gear. Assembly and painting required.
Features

CHASSIS:
2mm hard-anodized 7075-T6 aluminum chassis provides improved flex characteristics and minimal mass
2.5mm graphite center bulkhead brace for improved stiffness and reduced mass
STEERING:
Ball bearing raced 7075-T6 aluminum steering rack and composite steering bellcranks with 2.5mm graphite input arm offers optimized Ackermann and adjustable steering rate
New steering blocks with larger outer ball bearing and increased bearing spacing for improved durability
DIFFS AND SLIPPER:
Quick-change adjustable differential height with 7075-T6 aluminum bulkheads. Four independent front and rear diff heights possible.
Easy-access differentials for worry-free maintenance and adjustment
Fluid-filled gear differentials with machined ring gears, front and rear
Updated 3-pad slipper assembly allows use of center differential without changing center bone length
SUSPENSION:
Optimized suspension arm geometry with improved durability and stiffness
New symmetric rear arms with improved geometry can be flipped to allow a "split" for rear shock mounting position
7075-T6 aluminum arm mounts with optimized roll center positions use inserts, which allow fine tuning for a large range of anti-squat, kick-up, and toe adjustments
Common front and rear anti-roll bars to minimize spare part count
Anti-roll bar sets for both carpet/turf and dirt included
SHOCKS:
4mm graphite shock towers front and rear for improved stiffness and durability
V2 12mm Big Bore threaded aluminum shock with X-rings for low friction assembly
New shock lengths front and rear with longer stroke allows increased droop and up-travel for more consistent jumping and landing
Machined shock pistons for more precise fit and smoother operation
V2 12mm shock springs for lower achievable ride height and more nimble feel
OTHER FEATURES:
CVA assemblies for center drive-line with aligned shafts for minimal torque loss and improved efficiency
New rear hub assembly with modular vertical ball stud camber link mounts and axle height system for precise roll center adjustments
Outer rear hinge pins captured with bolt head and lock nut for increased durability
7075-T6 aluminum motor mount and 7075-T6 aluminum center bulkhead have increased rigidity to maintain more accurate gear mesh
New 2.5mm graphite battery strap with sliding support tabs for fine tuning battery position (accepts any R.O.A.R. approved 2S "shorty" packs)
7075-T6 aluminum 9 degree caster blocks
"Floating" servo mount with 7075-T6 aluminum mount and 2.5mm graphite brace
Factory Team ball bearing set with 26 precision ball bearings, now oiled instead of greased for more efficient drivetrain
Aluminum clamping wheel hexes, front and rear
Lightweight clear body and clear wing included

statt UVP des Herstellers 519,99 €
508,28
Sie sparen 11,71 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): ausverkauft /06.07.