RC4WD

The 1/14 Scale Earth Digger 360L Hydraulic Excavator 360L is even more powerful than its predecessor! Built for those that want reliability, unmatched looks and brute strength for getting that project done. Created with CNC machined metal parts, it's fully assembled and ready to dig! Be ready for the massive power delivered through the high output brushless system. Let's get digging!

Important Note: Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $450 to ship anywhere in the US and all international countries due to the size and weight.

Payment Information: Due to the value of this product, all orders must paid with bank transfer. When you check out, do not choose credit card or PayPal as we will refund you. Make sure to select Bank Wire Transfer as your payment method instead. Feel free to email us at support@rc4wd.com for any questions.

Notice: This product is not for first time RC hobbyists and should not be used by persons under the age of 16. This product is considered fairly difficult. Furthermore, we recommend that only experienced RC hobbyists purchase this product.

Specifications:

Alloy Zinc and Alloy Aluminum Casting (except Hydraulic Pump)
Custom 8 Channel 2.4Ghz Radio
Preinstalled High Intensity Light Sockets (Wire and bulbs are not included)
Optimized Steel Hydraulic System
Scale Driving Figure Ready (Not included)
Alloy Zinc Molded Tracks (50mm Width)
Efficient Undercarriage
Reliable Hydraulic Valve and Adjustable Pump
Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
Undercarriage May Rotate 360 Degrees (Endless)
Powder-coated in Yellow and Grey
Massive Brushless System (Including driving and turning)
Hydraulic System 60A Brushless ESC, Driving and Turning System 30A Brushless ESC
270Kv Brushless Monster Torque Motor, Shaft dia. 3.0mm
XT60 Power Plug Female
Run Time: 20 Minutes based on 4200mAh, 11.1V Battery
Steel Machined Oil Pump (60mm x 60mm x 93mm)
Digging Force: 15kg / 33lbs
Max Lifting Force: 70Kg / 154lbs
Driving Speed: 360 Meter per hour
Scale: 1:14
Length: 823mm / 32.4in
Width: 234mm / 9.21in
Height: 260mm / 10.2in
30 Days Limited Warranty
Operating Oil Pressure: 2.5Mpa
Inside Cab Length: 4.72in / 120mm
Inside Cab Width: 2.55in / 65mm
Inside Cab Height: 4.21in / 107mm
Deadweight: 26Kg / 57lbs

What's Included:

1x 1/14 Scale Earth Digger 360L Hydraulic Excavator (RTR)


Replacement Parts:

Earth Digger 4200XL High Voltage Brushless ESC (VVV-S0009)
Earth Digger 4200XL Excavator Brushless Motor (VVV-S0010)
Hydraulic Connector (Angled 90 Deg) (VVV-S0015)
Hydraulic Connector (Straight Version) (VVV-S0016)
4mm Heavy Duty Hydraulic Tubing (VVV-S0103)
Earth Digger 4200XL Excavator Aluminum Track (V2) (VVV-S0123)


Additional Parts Needed:

Lipo Charger (Z-E0047)
3S 6500mAh 11.1v 20c Lipo Battery (Max size: 73mm x 80mm x 132mm) (Z-E0038)
Mobile DTE22 V22 Hydraulic Oil 16oz (VVV-S0111)
8x AA Batteries for Radio
ESC Support XT60 Connector

Optional Upgrade

Volvo Decal Sheet Set for 1/12 Earth Digger 360L (VVV-C0267)


Notes:

Must turn on the transmitter before starting the ESC.
This unit doesn't have a low voltage cut off, so you will need the LiPo Battery Low Voltage Alarm (VVV-E0001) to protect your battery.
While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.

Instruction Manual:

Click here to download.


Warranty information

This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We have all spare parts available for sale. Pump, hoses and electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.
Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.
This Excavator is shipped without oil. You will have to fill the tank yourself (half tank), by using a funnel or tube (not included).

The Bully 2.2 MOA Competition Crawler is a full out of the box, ready to compete Crawler Kit. The Bully 2.2 offers unmatched features that include carbon fiber chassis, Bully 2.2 Competition CNC machined axles, aluminum shocks, titanium links, carbon fiber and delrin Rocker 2.2" Beadlock Wheels and Bully Advanced XS22 Compound Competition Tires.

This unit is a prebuilt, ready to add batteries, purpose built crawler. Built with the intention to meet the U.S.R.C.C.A rules and destroy the competition. Bully axles offer ultimate strength and durability, full ball bearings, steel internal heavy duty gears, XVD's, clockable C's, sleek gearbox and tons of adjustability to meet your needs.

The MOA allows for ultimate control with its dual motor setup. This will reduce your center of gravity and increase the run time. Paired with a Rocker Dig II (Z-E0028) to allow for independent control of the motors giving you optimum power and other useful functions on the rocks.

Not all RC Crawler manufacturers are created equally, RC4WD sets itself apart from the competitors by offering amazing quality and details. Adding to our portfolio is this crafted crawler that will without a doubt rock your world with its out of the box features! No other crawler or crawler company can compare. The Bully 2.2 MOA Competition Crawler is a game changer!

Features
CNC Machined Aluminum Axles
MOA (Motor on Axle Design)
Steel Internal Heavy Duty Gears
Bully 2.2" Competition Tires (Advanced X2SS Compound)
Carbon Fiber and Delrin Wheels
Clockable C's
Aluminum Shocks
Titanium Links
Carbon Fiber and Delrin Chassis
High Clearance Chassis Design
Carbon Fiber Battery Plate
Easy to Paint Lexan Body Panels
Endless Customizing for Unique End User

Bully 2 Competition Crawler Axles
Ratio: 40.7 : 1
Pinion Gear: 32P 14T
Hex Width: 219.5mm
Hardened Steel Gears
Case Material: Billet Aluminum

Bully 2 Suspension
4 Links Front and Rear Suspension

Shock Absorbers
Internal Spring 90mm Shocks _ Can Be Oil Filled

Wheels
Type: 2.2_ Lightweight Competition Beadlock Wheels
Hub: Hex Type
Width: 25.3mm
Back Spacing: 15mm

Bully 2 Dimensions
Wheel Base: 317mm (12.5'')
Width: 254mm (10'')
Height: 182mm (7.2'')
Ground Clearance: 92mm (3.6'')
Final Drive Ratio: 40.7 : 1
Weight: 4.38lbs / 1.99Kg

Drivetrain
These rod ends are made with a new advanced plastic compound from RC4WD and provide maximum durability on the rocks.

These solid titanium links are made from RC4WD and offer great drive-line angles and performance on the rocks.

The new Bully 2 Axles have spent years in research, testing and development to bring you a competition worthy axle out of the box. No need to spend countless dollars on upgrading these axles.

The new Bully 2 Gear Set is installed on Bully 2 Competition Crawler Axles. They have the most durable gears RC4WD has ever offered so that the MOA will stay on the rocks, day after day.

Suspension
Aluminum shocks feature a completely new design from the ground up and are built to handle all terrains. Your crawler will be able to battle all the flex needed to conquer the rocks.

Designed to be an out of box competition crawler tire, the Bully 2.2 is created with the help of the RC4WD Crawler Team with full testing completed in multiple conditions and terrains.

The high-quality carbon fiber and delrin materials make these wheels super lightweight, while still providing ample strength to support the weight of the MOA crawler.

The MOA chassis is machined with carbon fiber material. This is a new high-quality material RC4WD uses to make the MOA lighter to bring you the best options for your crawling style.

Electronics
Featuring a massive torque of 153oz@6V and a full metal geared drivetrain, the RC4WD Twister Metal Gear Digital Servo has enough power and perfect performance when you need it for difficult turning.

The MOA features the popular RC4WD Outcry Brushed Speed Controller with built-in drag brake and a separate 6V 5amp Turbo BEC to provide reliable and constant power any time you need it.

MOA Competition Crawler includes a high-quality XR4 revolutionary advanced radio system. It offers a 3rd and 4th channel. The 3-position switch is made for DIG switch and other customizable functions.

This small unit can be placed in almost any competition crawler and allows full control of F&R dig on any MOA crawler with ease. The Rocker Dig makes dig as easy as plug and play.

The MOA is powered by the Boost Rebuildable 35T Crawler Motor to supply you with loads of power, low end torque and high end speed to help propel the MOA anywhere.

What's Included:

1x RC4WD Bully II MOA RTR Competition Crawler


Replacements Parts:

RC4WD MOA Competition Crawler Chassis Set (Z-C0047)
Heavy Duty Steel Black 3mm Con Washers (10) (Z-S0843)
Bully 2 Competition Crawler Steering Link Kit (Z-S0952)
Bully 2 Competition Crawler Front Axle (Z-A0012)
Bully 2 Competition Crawler Rear Axle (Z-A0084)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
RC4WD M3/M4 Plastic Long Rod End (Z-S1375)
RC4WD M3/M4 Plastic Short Rod End (Z-S1378)
M3 Plastic Bent Rod End (Z-S0074)
Rocker 2.2" Lightweight Competition Beadlock Wheels (Z-W0178)
Bully 2.2" Competition Tire (Z-T0134)
Outcry Crawler Speed Controller ESC with TurboBEC (Z-E0007)
Rocker Dig II (Electronic) for MOA Crawler (Z-E0028)
XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio (Z-R0006)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
RC4WD Brushed 35T Boost Rebuildable Crawler 540 Motor (Z-E0045)
Heavy Duty Nylon Strap Lock (5) (Z-S0552)
Heavy Duty Metal Servo Arm for Futaba Type Servo (Black) (Z-S0182)


Hopups:

King Off-Road Dual Spring Shocks (90mm Medium OD) (Z-D0061) (Rear Only)
RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks (90mm) (Z-D0052) (Rear Only)
Twister Ultimate High Performance Waterproof Servo (Z-E0063)
Outcry Crawler Dual Motor ESC w. Fan & TurboBEC (Z-E0008)
Chubby Mini 3 TON Scale Jack Stands (Z-S0731)


Items of Interest: (not required for completion)

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Side Cutter Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver
Grease and Lubrication (Z-S0520)
Double Sided Tape for ESC (Z-S0935) (Z-S0934)

Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!

G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.

The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.

The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.

Are you ready for your off-road experience?

Custom Designed for True to Scale Looks
Realistic Aluminum Ladder Frame Chassis
R3 Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
3 link front and 4 link rear suspension
1.9 Stamped steel beadlocks w/lug nuts
Super grip dirt grabber tires
Chassis mounted steering servo
Plastic fuel cell receiver box
Dual spring oil filled shock absorbers


All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears

All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1 Internal 1.78:1
Gears - Wide steel 32P, Delrin spur, slipper clutch

All New Cast Yota II Axles
Ratio: 15/40 = 2.67:1
Width at hex 180.5mm

G2 Suspension
Double triangulated 4 Link rear suspension.
3 Link front suspension with panhard bar

Shock Absorbers
Dual Spring 80mm Shocks - Can be oil filled

Wheels
Type: 1.9 5 lug Wagon Wheels
Hub: Pin type Width: 25mm
Back spacing: 11mm

Bumpers
Machined billet aluminum, lightweight

G2 Truck Dimensions
Wheels base: 275mm (10.8")
Width: 220mm (8.7")
Height: 254mm (10")
Ground clearance: 55mm (2.2")
Final Drive Ratio: 31.9:1
Weight: 5.58Lbs / 2.533Kg

Drivetrain

The All New R3 single speed transmission comes with a tough cast metal case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch. Also features a sturdy billet aluminum motor mount for durability.

The G2 includes the new Hammer Transfer Case. Packed with scale detail, the Hammer features a cast metal exterior and the same heavy duty 32P widened gears for durability.

Drawing on the success of the RC4WD MOA gear sets, the G2 drivetrain has the most durable gears RC4WD has to offer so the G2 will stay on the trail, day after day.

The most scale accurate axles on the market, the RC4WD Cast Yota2 axles feature innovative 8 degree round knuckles, unique removable diff covers, new lower mounting points and a compact offset pumpkin in the front.

The Driveshafts for the G2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

Suspensions

The G2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under cab electronics tray for multiple electronics mounting options. Also includes a sturdy battery tray with strap mounts.

The G2 includes a set of new RC4WD Dual Spring Shocks. An all new design, this ultimate scale shock has realistic looks and the ultimate in performance. Machined from billet aluminum with dual springs and totally rebuildable.

The All New G2 Chassis is a machined billet aluminum ladder frame with an all link suspension design, scale shock hoops, chassis servo mounts and hard body mounting points for the ultimate in strength.

The G2 includes a set of RC4WD Black Stamped Steel 1.9 internal beadlock wheels. Featuring a super tough black finish, aluminum internal locking ring and popular 5 lug design with separate hub.

Every G2 needs a tough set or rock grabbing tires and the included Dirt Grabbers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.

Details

The G2 features the Defender Scale Body Set. The Defender body has an awesome appointment of scale details including mirrors, door handles, vents and grilles to match the 1:1 vehicle.

The unmistakable lines of a classic. The Defender Body Set is an exact replica of the full scale vehicle, right down to the rivets! No other scale body comes this close to realism.

The Defender Body Set comes in durable hard plastic molded in a paintable white finish, perfect for custom paint. All the trim parts are separate pieces to get a great look, with minimal fuss.

Comprised of over 50 parts, the Defender Body Set features a full detailed interior. Folding seats, gear shifter, handbrake and detailed dash. Its all here to bring your build to next level.

The crisp lines and subtle details are all captured. Chrome plated parts are included as well as colored lenses for all signal lights. All lamps can be illuminated with a minimum of modification.

Gelande II Shown Painted and with Upgrades (Not Included)

Truck built by the RCSparks

What's Included:

1x Gelande II Truck Kit w/Defender D90 Body Set

This is a kit that requires building time (appro. 2-3 hours) and electronics.

Notes:

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Spare Wheel and Tire not included
Fits RC4WD Spare Tire Case For Defender Body (Z-X0012)
RC4WD Spare Tires Case for Defender Body (Stamped w/RC4WD) (Z-X0010)
Fits ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)


Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Body Kit

Modeling / Craft Knife
Side Cutters
Instant glue / Plastic Cement (prefer non whitening)
Hex Drivers (1.5mm, 2mm)
Cross Phillips Screwdrivers (small)

Electronics

Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
1x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) 6 cell NIMH, or 2 cell Lipo battery
Charger (Consult your battery guide) Chargers

Replacements Parts:

Dual Spring 80mm Scale Black Shocks (Ver 2) (Z-D0039)
LED Basic Lighting System For Land Rover Defender D90 Body Set (Z-E0062)

Optional Parts:

Ultra Scale Hardened Steel Driveshafts "Ver 2" (3.15"/4.33"-80mm/110mm) (VVV-S0120)
Rebuildable Super Punisher Shaft (100mm-118mm, 3.94"-4.65") 5mm Hole (Z-S1261)
1/10 Land Rover Defender D90 Pick Up Truck Hard Plastic Body Kit (Z-B0058)
1/10-1/14 D90 Small Clear Light (VVV-C0101)
1/10-1/14 D90 Large Yellow Light (Detailed) (VVV-C0093)
1/10-1/14 D90 Large Clear Light (VVV-C0095)
1/10-1/14 D90 Small Yellow Light (Detailed) (VVV-C0099)
1/10-1/14 D90 Small Red Light (Detailed) (VVV-C0097)
1/10-1/14 D90 Large Red Light (Detailed) (VVV-C0091)
King Kong Tow Shackle with Mounting Bracket (Z-S0462)
King Off-Road Dual Spring Shocks (100mm Medium OD) (Z-D0063)
King Off-Road Dual Spring Shocks (90mm Medium OD) (Z-D0061)
Tough Armor Swing Away Tire Carrier w/Fuel holder for the Gelande 2 (Z-S1296)
RC4WD Rock Krawler Link kit for the Gelande 2 90/110 (Z-S1512)
Blade Snow Plow Mounting kit for Gelande 2 (Z-S1504)
Punisher Shaft II (80mm-100mm,3.15"-3.93") 5mm hole (Z-S1591)
RC4WD Bivouac 1/10 M.O.A.B Camping Trailer w/Tent (Z-H0007)
BigDog 1/10 Dual Axle Scale Boat Trailer (Z-H0006)

Upgraded Front / Rear Shock

RC4WD Superlift Superide 80mm Scale Shock Absorbers (Z-D0012)
RC4WD 80mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0036)
King Off-Road Scale Dual Spring Shocks (80mm) (Z-D0035)

Hopups:

Driver (Z-S0190)
Winch (Winch options)
XVD For Yota II Front Axle (Z-S0823)
Spare 5 Lug Wagon Wheel (Z-Q0023)
Spare Dirt Grabber Tire (Z-P0004)
Pintle hook and Lunette Ring (Z-S0233)
Scale Aisin/Yota Style Hubs (Z-S0196)
Trition Transfer Case (1:1 ratio) (Z-U0029)
Survivor Rear Bumper for Gelande (Z-S0698)
Gelande Side Rock Sliders (Z-S0137)
RC4WD Marlin Crawlers Side Plastic Sliders for Trail Finder 2 (Z-S0596)
Gelande II Winch Bumper (Z-S0825)
Yota II Scale Diff Cover (Z-S0907)
Shock Hoops for Trail Finder 2 Chassis (Z-S0597)
Gelande II Steering Guard (Z-S0824)
1/10 Front Light Guards for Land Rover Defender D90/110 (VVV-C0054)
RC4WD Adventure Defender Roof Rack (Z-C0024)
Defender D90 Window Protection Roll Cage (Z-S0958)
Land Rover D90 Metal Grill (VVV-C0019)
Land Rover Defender D90 Emblem Set (VVV-C0004)
Diamond Plate Accessory Pack for Defender D90 Body (Z-S0985)
Scale Steel Punisher Shaft V3 (3.56"-4.35" / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
Ultra Scale Hardened Steel Driveshaft (1.81"/1.96"-46mm/50mm) (VVV-S0006)
K44 Scale Front Axle (Z-A0048)
K44 Scale Rear Axle (Z-A0049)
Heavy Duty Metal Servo Arm 25t Futaba (Z-S0822)
Heavy Duty Metal Servo Arm 24t Hitec (Z-S0820)
Scale Accessories (Click Here)
Mud Flap For Gelande II (Z-S0890)
Challenger 1.9 Scale Tires (Z-T0108)
1.9" 5 Lug Steel Wheel Hex Hub (Z-S0734)
1.9 5 Lug Steel Wheel Hex Hub with Brake Rotor (Z-S0532)
Land Rover Disco Freestyle 1.9" Wheels (Gun Metal) (Z-W0037)
RC4WD Gelande Spare Tire Cover (Z-S0931)
Predator Track Front Axle Fitting Kit for Yota II (Z-S0918)
Protection Roll Cage (Z-S0958)
Predator Track Front Axle (Z-S0918)
Emblem Set (VVV-C0004)
Metal Grill (VVV-C0019)
Inner Fender Set for Defender D90 Body (Z-S1194)
Tow Bar Mount for Axial SCX10 (Z-S1125)
Rear Light Grill for Land Rover Defender D90 (VVV-C0082)
Mud Flap for Land Rover Defender D90 (VVV-C0072)
Front Light Grill for Land Rover Defender D90 (TypeB) (VVV-C0074)
R3 Scale Single Speed Transmission (Z-U0028)
R3 Single Speed Transmission Mounts (Z-S0802)
RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
RC4WD 1/10 Warn 9.5cti Winch (Z-S1079)
Functional Metal Light & Winch Bumper for Land Rover Defender D90 (VVV-C0125)
Rear Center Window Guard for Land Rover Defender D90 (VVV-C0124)
Metal Light & Winch Bumper for Land Rover Defender D90 (VVV-C0123)
Rear Small Window Guards for Land Rover Defender D90 (VVV-C0122)
Side Windows Guard Pair for Land Rover Defender D90 (VVV-C0121)
Complete Windows Guard Set for Land Rover Defender D90 (VVV-C0115)
RC4WD Ballistic Fabrications Diff Cover for Yota II Axle (Z-S1605)
Tough Armor front Bumper for G2 Cruiser (Z-S1606)
Land Rover D90 - Heritage Grill (VVV-C0164)

Items of Interest: (not required for completion)

Paint for body
Grease and Lubrication (Z-S0520)
Double Sided Tape for ESC (Z-S0935)(Z-S0934)

Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!

G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.

The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able customize your G2 and have it fit any identity.

The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.

Are you ready for your off-road experience?


Specifications:

Custom Designed for True To Scale Looks
Realistic Aluminum Ladder Frame Chassis
R3 Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
ADVANCED 3 & 4 LINK SUSPENSION
5 Lug Wagon 1.9 Steel Stamped Beadlock Wheels (Black)
Dirt Grabber 1.9" All Terrain Tires
Chassis Mounted Steering Servo
Dual Spring Oil Filled Shock Absorbers
Long Wheelbase Gelande II Chassis "LWB"
Plastic Rod Ends
Full Ball Bearings
Length: 20.07in / 510mm
Width: 7.87in /200mm
Height: 9.72in / 247mm
Wheelbase: 13in / 331mm
Weight: 105.6oz / 3.05kg

All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P hardened steel gears, 8 bearings, cast casing

All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1 Internal 1.78:1
Gears - Wide steel 32P, Delrin spur, slipper clutch

All New Cast Scale Axles
Ratio: 15/40 = 2.67:1
Width at hex 180.5mm

G2 Suspension
Double triangulated 4 Link rear suspension.
3 Link front suspension with panhard bar

Shock Absorbers
Dual Spring 80mm Shocks - Can be oil filled

Full Ball Bearing Set Included

Wheels
Type: 1.9 5 lug Wagon Wheels
Hub: Pin type Width: 25mm
Back spacing: 11mm

Bumpers
Machined billet aluminum, lightweight

D110 Truck Dimensions
Wheels base: 331mm (13")
Width: 200mm (7.87")
Height: 247mm (9.72")
Length: 510mm (20.07")
Weight: 3.05kg (105.6oz)


Drivetrain

The R3 Single Speed Transmission comes with a cast aluminum case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch.

The D110 includes the Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and the same new 32P widened gears for durability.

Drawing on the success of the RC4WD MOA gear sets, the D110 drivetrain has the most durable gears RC4WD has to offer so the D110 will stay on the trail, day after day.

The most scale accurate axles on the market, the RC4WD Cast Metal Axles feature innovative round knuckles, new lower mounting points and compact offset pumpkins.

The Driveshafts for the D110 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

Suspensions

The D110 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted electronics tray for multiple electronics mounting options.

The D110 includes a set of RC4WD Dual Spring Shocks. Designed for ultimate scale looks and ultimate performance. These dual spring shocks are machined from billet aluminum.

The D110 Chassis is a machined billet aluminum ladder frame design with 4 link and 3 link with panhard bar, scale shock hoops, chassis servo mounts and hard body mounts.

The D110 includes a set of RC4WD Black Stamped Steel 1.9 internal beadlock wheels. Super tough and durable black finish, aluminum internal ring and popular 6 lug design.

Every D110 needs a tough set or rock grabbing tires and the included RC4WD Dirt Grabbers deliver the traction as well as perfect scale looks in just the right size.

Details

The kit features the D110 Scale Body Set. The new custom 4 door Defender body has an awesome appointment of scale details including mirrors, door handles, vents and grilles to match the 1:1 vehicle.

The unmistakable lines of the 4 door classic. The Defender Body Set is a hand-made replica of the full scale vehicle, right down to the rivets! No other scale body comes this close to realism.

The D110 Body Set comes in durable hard plastic molded in a paintable finish, perfect for custom paint. All the trim parts are separate pieces to get a great look, mith minimal fuss.

(*Requires modification to fit)Comprised of 50 parts, the Defender Body Set features a detailed interior with realistic seats, gear shifter, handbrake and detailed dash. Its all here to bring your build to the next level of scale detail.

The crisp lines and subtle details are all captured. Chrome plated parts are included as well as colored lenses for all signal lights. Headlights can be LED illuminated with a minimum of modification.

Industrial Grade Aluminum Chassis with Authentic Ladder Type Design

4-link Suspension Design Front and Rear

Shown installed with Adventure Land Rover Defender D110 Roof Rack (Z-C0032) for example (Not Included)

What Included:

1x Gelande II D110 Truck Kit With Hard Body

Notes:

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Spare Wheel and Tire not included
Fits RC4WD Spare Tire Case For Defender Body (Z-X0012)
RC4WD Spare Tires Case for Defender Body (Stamped w/RC4WD) (Z-X0010)
Fits ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
This is a hand modified body from a D90 2 door body. We have adapted two bodies to make the stretched D110 4 door version. This is not a one piece unit, it's made up of many parts mostly hand cut. So there will be some imperfections in the body due to the hand modification. There will be some minor cosmetic work that may need to be completed to the body before painting
Interior fits D90. Its not long enough for the D110.Custom install required by customer for D110


Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Body Kit

Modeling / Craft Knife
Side Cutters
Instant glue / Plastic Cement (prefer non whitening)
Hex Drivers (1.5mm, 2mm)
Cross Phillips Screwdrivers (small)

Electronics

Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
1x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) 6 cell NIMH, or 2 cell Lipo battery
Charger (Consult your battery guide) Chargers

Replacement Parts:

Yota II Ultimate Scale Cast Axle (Front) (Z-A0080)
Yota II Ultimate Scale Cast Axle (Rear) (Z-A0081)
Gelande 2 Aluminum Body Mounts (Z-S0790)
Servo Mounts for Gelande 2 Chassis (Z-S0791)
Battery Plate for Gelande 2 (Z-S0792)
Gelande II Electronics Deck (Z-S0793)
Gelande 2 Front 3 Link & Panhard Mount (Black) (Z-S0794)
Gelande 2 Rear 4 Link Mount (Z-S0795)
Gelande II D110 Chassis Set (Z-C0043)
Transfer Case and Lower 4 Link Mount for Gelande 2 Chassis (Z-U0027)
Front Shock Hoops for Gelande 2 Chassis (Z-S0798)
Rear Shock Hoops for Gelande 2 Chassis (Z-S0799)
Gelande 2 Front Replacement Bumper (Z-S0800)
Gelande 2 Rear Replacement Bumper (Z-S0801)
R3 Single Speed Transmission Mounts (Z-S0802)
R3 Scale Single Speed Transmission (Z-U0028)
Metal Drive Coupling for Gelande 2 (Z-S0803)
M3 Driveshaft Screw Pin (5) (Z-S0804)
1mm Black Spacer with M3 Hole (10) (Z-S0809)
3mm Black Spacer with M3 Hole (10) (Z-S0806)
5mm Black Spacer with M3 Hole (10) (Z-S0821)
Dual Spring 80mm Scale Black Shocks (Ver 2) (Z-D0039)
59mm (2.32") Aluminum Link for Gelande 2 (Z-S0807)
65.3mm (2.57") Aluminum Link for Gelande 2 (Z-S0817)
73mm (2.87") Aluminum Link for Gelande 2 (Z-S0805)
70mm (2.75") Aluminum Link for Gelande 2 (Z-S0819)
Drag Link for Gelande 2 (Z-S0810)
5 Lug Wagon 1.9 Steel Stamped Beadlock Wheels (Black) (Z-W0129)
Dirt Grabber 1.9" All Terrain Tires (Z-T0005)
Fuel Cell Radio Box (Z-S0592)
Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole (Z-S0583)
Aluminum Driveshaft Locking Ring for Scale Nylon Punisher Shafts (Z-S0443)
M3 Medium Straight Plastic Rod End (20x) (Z-S0399)
M3 Short Bent Plastic Rod End (20x) (Z-S0402)
M3 Mini Plastic Rod End (20x) (Z-S0398)
M3 Offset Short Plastic Rod End (20x) (Z-S0401)
Land Rover Defender D90 Hard Body Spare Parts Assortment (Z-B0034)
Land Rover Defender D90 Door Handles (2) (Z-S0687)
Gelande 2 Decal Sheet for Land Rover Defender D90 Hard Plastic Body Kit (Z-B0038)
Hammer Transfer Case (1.47/1) (Z-U0024)
129mm Aluminum Link (Black) (Z-S1146)
Metal Drive Extended Coupling (Z-S1148)
14t 32p Hardened Steel Pinion Gear (Z-S0430)
64t Delrin Spur Gear for R3 2 Speed Transmission (Z-G0055)

Optional Parts:

1.9" 5 Lug Steel Wheel Hex Hub (Z-S0734)
1.9 5 Lug Steel Wheel Hex Hub with Brake Rotor (Z-S0532)
Land Rover Disco Freestyle 1.9" Wheels (Gun Metal) (Z-W0037)
Scale Aisin/Yota Style Hubs (Z-S0196)
XVD Axle for Ultimate Scale Yota II G2 Axle (Z-S0823)
Gelande 2 Steering Guard (Z-S0824)
Scale Steel Punisher Shaft V3 (3.56"-4.35" / 90.5mm-110.5mm) 5mm Hole (Z-S0826)
Ultra Scale Hardened Steel Driveshaft (1.81"/1.96"-46mm/50mm) 5mm (VVV-S0006)
Gelande Side Rock Sliders (Z-S0137)
RC4WD Marlin Crawlers Side Plastic Sliders for Trail Finder 2 (Z-S0596)
RC4WD Marlin Crawlers Side Metal Sliders for Trail Finder 2 (Z-S0753)
King Off-Road Scale Dual Spring Shocks (80mm) (Z-D0035)
#1 Aluminum Bumper Mount For Trail Finder 2 (Z-S0006)
Shock Hoops for Trail Finder 2 Chassis (Z-S0597)
Triton Transfer Case (1:1) (Z-U0029)
Optional Rear Bumper Mount for Gelande 2 (Z-S0993)
Yota II Scale Diff Cover (Z-S0907)
RC4WD Rock Krawler Link kit for the Gelande 2 90/110 (Z-S1512)
Blade Snow Plow Mounting kit for Gelande 2 (Z-S1504)
Punisher Shaft II (80mm-100mm,3.15"-3.93") 5mm hole (Z-S1591)
RC4WD Bivouac 1/10 M.O.A.B Camping Trailer w/Tent (Z-H0007)
BigDog 1/10 Dual Axle Scale Boat Trailer (Z-H0006)

Hopups:

RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
RC4WD 1/10 Warn 9.5cti Winch (Z-S1079)
Functional Metal Light & Winch Bumper for Land Rover Defender D90 (VVV-C0125)
Rear Center Window Guard for Land Rover Defender D90 (VVV-C0124)
Metal Light & Winch Bumper for Land Rover Defender D90 (VVV-C0123)
Rear Small Window Guards for Land Rover Defender D90 (VVV-C0122)
Side Windows Guard Pair for Land Rover Defender D90 (VVV-C0121)
Complete Windows Guard Set for Land Rover Defender D90 (VVV-C0115)
RC4WD Ballistic Fabrications Diff Cover for Yota II Axle (Z-S1605)
Tough Armor front Bumper for G2 Cruiser (Z-S1606)
Land Rover D90 - Heritage Grill (VVV-C0164)

Recommended Equipment:

Heavy Duty Metal Servo Arm 24t Hitec (Z-S0820)
Heavy Duty Metal Servo Arm 25t Futaba (Z-S0822)
XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio (Z-R0006)

Items of Interest: (not required for completion)

Paint for body
Grease and Lubrication (Z-S0520)
Double Sided Tape for ESC (Z-S0935)(Z-S0934)

RC4WD ZK0051 Gelande II Truck Kit w/Cruiser Body Set {\rtf1\ansi\ansicpg1252\deff0{\fonttbl{\f0\fnil\fcharset0 Arial;}}
{\colortbl ;\red0\green0\blue0;}
\viewkind4\uc1\pard\cf1\lang1031\fs16 Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!\par
\par
G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.\par
\par
The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.\par
\par
The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.\par
\par
Are you ready for your off-road experience?\par
\par
Custom Designed for True to Scale Looks\par
Realistic Aluminum Ladder Frame Chassis\par
R3 Single Speed Transmission\par
Center Mounted Realistic 4x4 Transfer Case\par
Cast Metal Axles with Locked Differentials\par
3 Link front and 4 Link rear suspension\par
1.9 Stamped Steel Beadlocks w/lug nuts\par
Super grip dirt grabber Tires\par
Chassis mounted Steering servo\par
Plastic fuel cell receiver box\par
Dual spring oil filled Shock absorbers\par
\par
What's Included:\par
\par
1x Gelande II Truck Kit w/Cruiser Body Set\par
\par
\par
This is a kit that requires building time (appro. 2-3 hours) and electronics\par
\par
Required to Complete:\par
\par
Truck Kit\par
\par
Hex Drivers (1.5mm, 2mm, 2.5mm)\par
Long Nose Pliers\par
Associated Thread Locking Adhesive\par
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)\par
\par
\par
Body Kit\par
\par
Modeling / Craft Knife\par
Side Cutters\par
Instant glue / Plastic Cement (prefer non whitening)\par
Hex Drivers (1.5mm, 2mm)\par
Cross Phillips Screwdrivers (small)\par
\par
\par
Electronics\par
\par
Motor (35t, 45t, or 55t)\par
Electronic Speed Controller "ESC" (Z-E0007)\par
Radio and Receiver (3 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)\par
2x Standard Size Servo (Z-E0035)\par
Battery (Consult your "ESC" manual) 6 cell NIMH, or Lipo battery\par
Charger (Consult your battery guide) Chargers\par
}

Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow, or mud than the Trail Finder 2.
Part scale truck, part adventurer, your TF2 is ready for your mud kicking trail-loving lifestyle!

The TF2 has both detailed styling and aggressive performance.
You will find a balance of capability and performance built into every TF2.
Performance of the TF2 is smooth and with its 2 speed selectable transmission, 4WD drivetrain, bullet-proof transfer case and quality metal components throughout.
The TF2 is truly a work of art in both appearance and performance.

Every TF2 is compatible with a full range of option and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 offroad truck... The Trailfinder 2. Your adventure awaits....

Realistic Billet Aluminum Ladder Frame Chassis
2 Speed Remote Selectable Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
True to Scale Leaf Spring Suspension
1.55" Stamped Steel Beadlock Wheels with Lug Nuts
Super Grip High Performance Mud Thrasher Tires
Realistic Tube Bumpers - Rock Rails - Skid Plate
Chassis Mounted Steering Servo
RC4WD Ultimate Scale Shocks Absorbers

All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears

All New R3 2 Speed Transmission
Ratios Pinion/spur 14/64 = 4.57:1 1st gear
3.47:1 2nd gear 1.27:1
Gears - Wide steel 32P, Delrin spur, slipper clutch,
Features - Machined billet aluminum casing, scale looking, Motor mount can be rotated to 10 different positions,
compatible with other brand spurs (Axial, Traxxas, Robinson)

Cast Yota Axles
Ratio: 15/40 = 2.67:1 Width at hex (using 4mm TF2 hexes): 176.5mm

All New Trailfinder 2 Chassis
Features - Billet aluminum constriction Adjustable shock hoops

Driveshafts
High quality plastic material, very durable High quality steel Yokes

Wheels
Name: 1.55 OEM beadlock wheels Hub: 12mm hex Width: 22mm Back spacing: 9mm
Features: Stamped steel, aluminum hub, internal beadlock, very scale looking, 6 bolt pattern,

Bumpers
Tough Armor TF2 Winch front bumper Tough Armor TF2 Rear Bumper Tough Armor TF2 Side Sliders Authentic
looking crawler style tube bumper. Very high quality flexible plastic, very durable, very scale.

TF2 Truck Dimensions
Wheels base: 287mm (11.3")
Width: 215mm (8.5")
Height: 138mm (5.4")
Ground clearance: 57mm (2.5")
Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1

DRIVETRAIN

The TF2 includes the new Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and the same new 32P widened gears for durability.

The most scale accurate axles on the market, the RC4WD Cast Yota axles feature innovative round knuckles, new lower mounting points and compact offset pumpkins.

The All New R3 2 speed transmission comes with a fully machined billet aluminum case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch. The new designed motor mount is adjustable in 10 positions.

Drawing on the success of the RC4WD MOA gear sets, the TF2 drivetrain has the most durable gears RC4WD has to offer so the TF2 will stay on the trail, day after day.

The Driveshafts for the TF2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

SUSPENSION

The TF2 includes a set of RC4WD Ultimate Scale Shocks. Designed for ultimate scale looks and ultimate performance.
Machined from billet aluminum, rebuildable and internally sprung.

The TF2 includes a set of RC4WD White Stamped Steel 1.55 internal beadlock wheels. Super tough paintable white finish,
aluminum internal ring and popular 6 lug design.

The TF2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under cab electronics tray for multiple electronics mounting options.

The All New TF2 Chassis is a machined billet alumi- num ladder frame design with leaf springs, scale shock hoops, chassis servo mounts and hard body mounts. 4-link conversion available soon!

Every TF2 needs a tough set or rock grabbing tires and the included Mud Thrashers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.

What's Included:

1x Trail Finder 2 Truck Kit


This is a kit that requires building time (appro. 2-3 hours) body and electronics.

Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)


Electronics

Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (3 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
2x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) 6 cell NIMH, or Lipo battery
Charger (Consult your battery guide) Chargers


Suggested Bodies

RC4WD Mojave II Body Set for Trail Finder 2 (Primer Gray) (Z-B0084)
Chevrolet Blazer Hard Body Complete Set (Z-B0092)
RC4WD Trail Finder 2 RTR w/Mojave II Body (Z-RTR0024)
Trail Finder 2 Truck Kit w/Mojave II Body (Z-K0049)


Replacements Parts:

Soft Steel Leaf Spring for Trail Finder 2 (Z-S0518)
Hammer Transfer Case (1.47/1) (Z-U0024)
Metal Drive Coupling for Trail Finder 2 (Z-S0599)
Yota Steering Links for Trail Finder 2 (Z-S0601)
R3 Scale 2 Speed Transmission (Z-U0025)
14t 32p Hardened Steel Pinion Gear (Z-S0430)
Fuel Cell Radio Box (Z-S0592)
Trail Finder 2 Plastic Body Posts (Z-B0029)
Leaf Spring Shackles & Mounts Kit (Z-S0047)
RC4WD Marlin Crawlers Front Plastic Tube Bumper for Trail Finder 2 (Z-S0594)
RC4WD Marlin Crawlers Rear Plastic Tube Bumper for Trail Finder 2 (Z-S0595)
M3 Offset Short Plastic Rod End (20x) (Z-S0401)
M3 Mini Plastic Rod End (20x) (Z-S0398)
Stamped Steel 1.55" Stock White Beadlock Wheel (Z-W0035)
Yota Ultimate Scale Cast Axle (Front) (Z-A0058)
Yota Ultimate Scale Cast Straight Axle (Rear) (Z-A0061)
RC4WD Marlin Crawlers Side Plastic Sliders for Trail Finder 2 (Z-S0596)
Scale Nylon Long Punisher Shaft (104mm-150mm) 5mm Hole (Z-S0582)
Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole (Z-S0583)
Trail Finder 2 Bumper Mounts (Z-S0593)
Mud Thrashers 1.55" Scale Tires (Z-T0100)
Rear Shocks The Ultimate Scale Shocks 90mm (Silver) (Z-D0001)
Front Shocks The Ultimate Scale Shocks 70mm (Silver) (Z-D0004)


Optional Parts:

RC4WD 1/10 V8 Scale Engine (Z-S1043)
RC4WD R4 Ultimate Scale Single Speed Transmission (Z-U0031)
Trail Finder 2 V8 Engine Mounts (Z-S1239)
RC4WD Skid Plate for Trail Finder 2 V8/R4 (Z-S1488)
R3 Scale 2 Speed Transmission (Z-U0025)
R3 Tranny Mounts For Trail Finder 2 (Z-S0677)
TF2 Long Drive Shaft Coupling for R3 Single Speed (Z-S0898)
Triton Transfer Case (1:1) (Z-U0029)
XR4 XR3 2.4Ghz 4-Channel Blue Receiver (Z-R0008)
Outcry Crawler Dual Motor ESC w. Fan & TurboBEC (Z-E0008)
RC4WD Outcry Crawler Water-Resistant Brushed Speed Control ESC Unit (Z-E0068)
RC4WD 1/10 High Performance SMD LED Light Bar (50mm/2") (Z-E0057)
RC4WD 1/10 High Performance SMD LED Light Bar (100mm/4") (Z-E0056)
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (40mm/1.5") (Z-E0054)
RC4WD 1/10 High Performance SMD LED Light Bar (75mm/3") (Z-E0058)
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (20MM/0.75") (Z-E0052)
RC4WD 1/10 Baja Designs Stealth LED Light Bar (100mm) (Z-E0064)
RC4WD 1/10 Baja Designs Squadron Pro LED Lights (Z-E0066)
RC4WD Outcry Crawler Brushed Mini Speed Control ESC Unit (Z-E0070)
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (100mm/4") (Z-E0059)
RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (75mm/3") (Z-E0055)
XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio (Z-R0006)
RC4WD Y Harness with Tamiya Leads (Z-S1577)
XT60 Male to Tamiya Male Connector Adapter (Z-E0072)
Y harness with Tamiya Connectors for Lightbars (Z-S1601)
RC4WD 1/10 Warn 9.5cti Winch (Z-S1079)
RC4WD Foldable Winch Anchor (Z-S1262)
RC4WD Foldable Winch Anchor (Black) (Z-S1623)
RC4WD 1/8 Warn Zeon 10 Winch (Z-E0069)
RC4WD 1/10 Mini Warn 9.5cti Winch (Z-S1571)
Hitch Mount Portable Winch Mounting System (Z-S1284)
Red Super Soft Flex Leaf Springs (4) (Z-S0570)
Leaf Spring Shackles & Mounts Kit (Z-S0047)
Super Scale Steel Leaf Spring for TF2 & Tamiya Bruiser (Z-S1476)
The Ultimate Scale Shocks 90mm (Black) (Z-D0009)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0038)
RC4WD 70mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0034)
540 Crawler Brushed Motor 35T (Z-E0005)
540 Crawler Brushed Motor 55T (Z-E0003)
540 Crawler Brushed Motor 80T (Z-E0001)
RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor (Z-E0041)
RC4WD Brushed 55T Boost Rebuildable Crawler 540 Motor (Z-E0044)
RC4WD Brushed 35T Boost Rebuildable Crawler 540 Motor (Z-E0045)
540 Crawler Brushed Motor 27T (Z-E0067)
540 Crawler Brushed Motor 20T (Z-E0065)
Scale Steel Punisher Shaft (100mm-130mm) 5mm (Z-S0209)
Punisher Shaft II (90mm - 120mm / 3.54" - 4.72") 5mm F-350 Hi-Lift (Z-S0522)
Scale Steel Punisher Shaft V3 (90.5mm - 110.5mm / 3.56" - 4.35") 5mm Hole (Z-S0826)
Rebuildable Super Punisher Shaft (100mm - 118mm / 3.94" - 4.65") 5mm Hole (Z-S1261)
Ultra Scale Hardened Steel Driveshaft set for Tamiya Bruiser (VVV-C0119)
Ultra Scale Hardened Steel Driveshaft "Ver 2" (80mm - 110mm / 3.15" - 4.33") (VVV-S0120)
Mega Truck Universal Shaft "Ver 2" (92mm to 130mm) (VVV-S0054)
Ultra Scale Hardened Steel Driveshaft (65mm - 85mm / 2.25" - 3.34") 5mm (VVV-S0017)
M3 Mini Aluminum Axial Style Rod End (Blue) (10) (Z-S1354)
M3 Mini Aluminum Axial Style Rod End (Silver) (10) (Z-S1346)
M3 Mini Aluminum Axial Style Rod End (Red) (10) (Z-S1362)
M3 Mini Aluminum Axial Style Rod End (Black) (10) (Z-S1370)
M3 Offset Short Aluminum Axial Style Rod End (Black) (10) (Z-S1376)
M3 Offset Short Aluminum Axial Style Rod End (Silver) (10) (Z-S1352)
M3 Offset Short Aluminum Axial Style Rod End (Red) (10) (Z-S1368)
M3 Offset Short Aluminum Axial Style Rod End (Blue) (10) (Z-S1360)
Superlift Adjustable Steering Stabilizer (90mm-120mm) (Z-S0986)
Superlift Adjustable Steering Stabilizer (65mm-90mm) (Z-S0988)
Heavy Duty Nylon Strap Lock (5) (Z-S0552)
Scale Plastic Driver Figure (Z-S0190)
#1 Aluminum Bumper Mount For Trail Finder 2 (Z-S0006)
#2 Aluminum Bumper Mount For Trail Finder 2 (Z-S0004)
#3 Aluminum Bumper Mount For Trail Finder 2 (Z-S0003)
3 Link Kit For Trail Finder 2 Front Axle w/Panhard Setup (Z-S0565)
4 Link Kit For Trail Finder 2 Rear Axle (Z-S0603)
ARB 1/10 Roof Rack (Z-X0008)
Full Tubed Exocage for Hilux and Mojave Body (Z-C0045)
Rampage Front Recovery Bumper (Z-S0997)
Rampage Recovery Rear Bumper with Swing Away Tire Carrier (Z-S0959)
RC4WD 101mm (3.98") Internally Threaded Titanium Link (Z-S1321)
RC4WD 60mm (2.36") Internally Threaded Titanium Link (Z-S1319)
RC4WD 67mm (2.64") Internally Threaded (Z-S1333)
RC4WD 73mm (2.87") Internally Threaded (Z-S1329)
RC4WD 75mm (2.95") Internally Threaded (Z-S1337)
RC4WD 81mm (3.19") Internally Threaded (Z-S1331)
RC4WD Marlin Crawlers Front Steel Tube Bumper for Trail Finder 2 (Z-S0778)
RC4WD Adjustable Jack Stand Truck Display (Z-X0013)
RC4WD Marlin Crawlers Rear Tube Bumper for Trail Finder 2 (Z-S0767)
RC4WD Marlin Crawlers Side Metal Sliders for Trail Finder 2 (Z-S0753)
Rear Shock Hoops for Gelande 2 Chassis (Z-S0799)
Single Rear Shock Mount for Trail Finder 2 (Z-S0768)
Steel Roll Bar for Trail Finder 2 (Z-S0771)
Superlift Dual Front Shock Mount for Trail Finder 2 (Z-S0028)
Tough Armor Front Lightbar Bumper for Trail Finder 2 (Z-S1058)
Tough Armor Front Tube Bumper w/Winch Mount for Trail Finder 2 (Z-S0765)
Tough Armor Rear Aluminum Bumper for Trail Finder 2 (Z-S0981)
Tough Armor Rear Bar Bumper for Trail Finder 2 (Z-S0728)
Tough Armor Rear Bumper for Trail Finder 2 w/Hitch Mount (Z-S0579)
Tough Armor Side Single Bar Sliders for Trail Finder 2 (Z-S0727)
Tough Armor Side Steel Sliders for Trail Finder 2 (Z-S0056)
Tow Bar Mount for TF2 / G2 (Z-S1125)
Tuff Truck Saddle Tool Box for Trail Finder 2 (Z-S0839)
Universal Bumper Mounts to fit Trail Finder 2 (Z-S1005)
1/14 Truck Tire Chocks (VVV-C0024)
Marlin Crawlers Rear Steel Tube Bumper for Trail Finder 2 (Z-S1373)
RC4WD Billet Aluminum Fuel Cell Radio Box (Z-S1093)
RC4WD Billet Aluminum Fuel Cell Radio Box (Z-S1122)
Rock Krawler Replacement 3/4 Link kit for Trail (Z-S1486)
Tough Armor Roll Cage For Chevy Blazer (Z-S1708)
M3 Offset Short Aluminum Rod Ends (Silver) (10) (Z-S1629)
M3 Offset Short Aluminum Rod Ends (Red) (10) (Z-S1631)
M3 Offset Short Aluminum Rod Ends (Blue) (10) (Z-S1633)
M3 Offset Short Aluminum Rod Ends (Black) (10) (Z-S1635)
Front Inner Fender Set for Chevy Blazer (Z-S1729)


Front Shocks:

King Off-Road Scale Dual Spring Shocks (70mm) (Z-D0037)
RC4WD 70mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0034)


Rear Shocks:

The Ultimate Scale Shocks 90mm (Silver) (Z-D0001)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
King Off-Road Scale Dual Spring Shocks (90mm) (Z-D0033)
RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0038)
The Ultimate Scale Shocks 90mm (Black) (Z-D0009)

The Bully 2.2 MOA Competition Crawler Kit is ready to be built and compete. The Bully 2.2 offers unmatched features that include carbon fiber chassis, Bully 2.2 Competition CNC machined axles, aluminum shocks, titanium links, carbon fiber and delrin Rocker 2.2_ Beadlock Wheels and Bully Advanced X2SS Compound Competition Tires.

The Bully 2.2 MOA Competition Crawler Kit components are built with the intention to meet the U.S.R.C.C.A rules and destroy the competition. Bully axles offer ultimate strength and durability, full ball bearings, steel internal heavy duty gears, XVD_s, clockable C_s, sleek gearbox and tons of adjustability to meet your needs.

The MOA allows for ultimate control with its dual motor setup. This will reduce your center of gravity and increase the run time. Pair it with a Rocker Dig II (Z-E0028) to allow for independent control of the motors giving you optimum power and other useful functions on the rocks.

Not all RC Crawler manufacturers are created equally, RC4WD sets itself apart from the competitors by offering amazing quality and details. Adding to our portfolio is this crafted crawler that will without a doubt rock your world with its out of the box features! No other crawler or crawler company can compare. The Bully 2.2 MOA Competition Crawler is a game changer!

Features
CNC Machined Aluminum Axles
MOA (Motor on Axle Design)
Steel Internal Heavy Duty Gears
Bully 2.2" Competition Tires (Advanced X2SS Compound)
Carbon Fiber and Delrin Wheels
Clockable C's
Aluminum Shocks
Titanium Links
Carbon Fiber and Delrin Chassis
High Clearance Chassis Design
Carbon Fiber Battery Plate
Easy to Paint Lexan Body Panels
Endless Customizing for Unique End User

Specifications
Bully 2 Competition Crawler Axles
Ratio: 40.7 : 1
Pinion Gear: 32P 14T
Hex Width: 219.5mm
Hardened Steel Gears
Case Material: Billet Aluminum

Bully 2 Suspension
4 Link Front and Rear Suspension

Shock Absorbers
Internal Spring 90mm Shocks _ Can Be Oil Filled

Wheels
Type: 2.2" Lightweight Competition Beadlock Wheels
Hub: Hex Type
Width: 25.3mm
Back Spacing: 15mm

Bully 2 Dimensions
Wheel Base: 317mm (12.5")
Width: 254mm (10")
Height: 182mm (7.2")
Ground Clearance: 92mm (3.6")
Final Drive Ratio: 40.7 : 1
Weight: 4.38lbs / 1.99Kg

Drivetrain
These rod ends are made with a new advanced plastic compound from RC4WD and provide maximum durability on the rocks.

These solid titanium links are made from RC4WD and offer great drive-line angles and performance on the rocks.

The new Bully 2 Axles have spent years in research, testing and development to bring you a competition worthy axle out of the box. No need to spend countless dollars on upgrading these axles.

The new Bully 2 Gear Set is installed on Bully 2 Competition Crawler Axles. They have the most durable gears RC4WD has ever offered so that the MOA will stay on the rocks, day after day.

Suspension
Aluminum shocks feature a completely new design from the ground up and are built to handle all terrains. Your crawler will be able to battle all the flex needed to conquer the rocks.

The high-quality carbon fiber and delrin materials make these wheels super lightweight, while still providing ample strength to support the weight of the MOA crawler.

Designed to be an out of box competition crawler tire, the Bully 2.2 is created with the help of the RC4WD Crawler Team with full testing completed in multiple conditions and terrains.

The MOA chassis is machined with carbon fiber material. This is a new high-quality material RC4WD uses to make the MOA lighter to bring you the best options for your crawling style.

What's Included:

1x RC4WD Bully II MOA Competition Crawler Kit


This kit requires building time (approx. 2-3 hours) and electronics.

Notes:

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with a "water-drop" require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.



Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Side Cutter Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver


Electronics:

Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007 and Z-E0028) or (Z-E0008)
Radio and Receiver (2 channel or more) (3 Channel Z-R0009 or 4 Channel Z-R0006)
1x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) 6 cell NIMH or Lipo battery
Charger (Consult your battery guide) Chargers


Replacements Parts:

RC4WD MOA Competition Crawler Chassis Set (Z-C0047)
Heavy Duty Steel Black 3mm Con Washers (10) (Z-S0843)
Bully 2 Competition Crawler Steering Link Kit (Z-S0952)
Bully 2 Competition Crawler Front Axle (Z-A0012)
Bully 2 Competition Crawler Rear Axle (Z-A0084)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
RC4WD M3/M4 Plastic Long Rod Ends (Z-S1375)
RC4WD M3/M4 Plastic Short Rod Ends (Z-S1378)
M3 Plastic Bent Rod End (Z-S0074)
Rocker 2.2" Lightweight Competition Beadlock Wheels (Z-W0178)
Bully 2.2" Competition Tire (Z-T0134)
Heavy Duty Nylon Strap Lock (5) (Z-S0552)
Heavy Duty Metal Servo Arm for Futaba Type Servo (Black) (Z-S0182)
RC4WD Medium Decal Sheet (Z-S1272)


Hopups:

King Off-Road Dual Spring Shocks (90mm Medium OD) (Z-D0061) (Rear Only)
RC4WD Rock Krawler RRD Emulsion Scale Dual Spring Shocks (90mm) (Z-D0052) (Rear Only)
Twister Ultimate High Performance Waterproof Servo (Z-E0063)
Outcry Crawler Dual Motor ESC w. Fan & TurboBEC (Z-E0008)
Chubby Mini 3 TON Scale Jack Stands (Z-S0731)
Outcry Crawler Speed Controller ESC with TurboBEC (Z-E0007)
Rocker Dig II (Electronic) for MOA Crawler (Z-E0028)
XR4 4-Channel 2.4Ghz Transmitter/Receiver Radio (Z-R0006)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
RC4WD Brushed 35T Boost Rebuildable Crawler 540 Motor (Z-E0045)
RC4WD Brushed 55T Boost Rebuildable Crawler 540 Motor (Z-E0044)
RC4WD Brushed 45T Boost Rebuildable Crawler 540 Motor (Z-E0041)

Adventures can happen anywhere. Nothing will give you more fun in the sand, dirt, snow or mud than the TF2 LWB Kit. Part scale truck, part adventurer, your TF2 LWB Kit is ready for your mud kicking trail-loving lifestyle!

The TF2 LWB Kit has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2 LWB Kit. Performance of the TF2 LWB Kit is smooth and with its 2 speed selectable transmission, 4WD drivetrain, bulletproof transfer case and quality metal components throughout. The TF2 LWB Kit is truly a work of art in both appearance and performance.

Every TF2 LWB Kit is compatible with a full range of option and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 offroad truck... The TF2 LWB Kit.

Your adventure awaits....

Custom Designed for True to Scale Looks
Realistic Billet Aluminum Ladder Frame Chassis
2 Speed Remote Selectable Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles
True to Scale Leaf Spring Suspension
Highly Detailed Body with Dropped Bed and More
1.55" Stamped Steel Beadlock Wheels with Lug Nuts
Super Grip High Performance Mud Thrasher Tires
Realistic Tube Bumpers - Rock Rails - Skid Plate

All New Hammer Transfer Case
Ratio: 1.47:1
Gears: Wide 32P Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears

All New R3 2 Speed Transmission
Ratios Pinion/Spur 14/64 = 4.57:1
1st Gear 3.47:1
2nd Gear 1.27:1
Gears: Wide Steel 32P, Delrin Spur, Slipper Clutch
Features: Machined Billet Aluminum Casing, Scale Looking, Motor Mount can be adjusted with up to 10 different positions, Compatible with other brand spurs (Axial, Traxxas, Robinson)

Cast Yota Axles
Ratio: 15/40 = 2.67:1
Width at Hex (Using 4mm TF2 Hexes): 176.5mm

All New Trail Finder "LWB" 2 Chassis
Features: Billet Aluminum Constriction, Adjustable Shock Hoops

Drive Shafts
High Quality Plastic Material, Very Durable High Quality Steel Yokes

Wheels
Name: 1.55’’ OEM Beadlock Wheels
Hub: 12mm Hex
Width: 22mm
Back Spacing: 9mm
Features: Stamped Steel, Aluminum Hub, Internal Beadlock, Very Scale Looking, 6 Lug Design

Bumpers
Marlin Crawlers Front Plastic Tube Bumper
Marlin Crawlers Rear Plastic Tube Bumper
Marlin Crawlers Side Plastic Sliders
Authentic Looking Crawler Style Bumper, High Quality Flexible Plastic, Extremely Durable, Very Scale

TF2 Truck Dimensions
Wheels Base: 12.36in/314mm
Width: 8.46in/215mm
Height: 8.27in/210mm
Ground Clearance: 2.09in/53mm
Final Drive Ratios: 1st - 62.1:1, 2nd - 22.75:1

DRIVETRAIN

The all new R3 2 Speed Transmission comes with a fully machined billet aluminum case and wider gears to allow for more abuse along with a Delrin Spur with Slipper Clutch. The newly designed motor mount is adjustable with up to 10 different positions.

The TF2 LWB Kit includes the new Hammer Transfer Case. Packed with detail, the case features a cast metal exterior and new 32P Widened Gears for durability.

Drawing on the success of the RC4WD MOA gear sets, the TF2 LWB Kit Drivetrain has the most durable gears RC4WD has to offer so the TF2 LWB Kit can stay on the trail, day after day.

The most scale accurate axles on the market, the RC4WD Cast Yota Axles feature innovative round knuckles, new lower mounting points and compact offset pumpkins.

The Drive Shafts for the TF2 LWB Kit are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

SUSPENSION

The TF2 LWB Kit Chassis features a molded fuel cell that doubles as an electronics storage box and an aluminum, frame mounted under cab electronics tray for multiple mounting options for your electronics.

The TF2 LWB Kit includes a set of RC4WD Ultimate Scale Shocks. These shocks are designed for ultimate scale looks and optimum performance. They’re machined from billet aluminum, are internally sprung and are completely rebuildable!

The all new TF2 LWB Kit Chassis is a machined billet aluminum ladder frame design with leaf springs, scale shock hoops, chassis servo mounts and hard body mounts for maximum strength. A 4-link conversion will be available soon!

The TF2 LWB Kit includes a set of RC4WD White Stamped Steel 1.55’’ Internal Beadlock Wheels. These wheel offer a super tough paintable white finish, aluminum internal ring and popular 6 Lug design.

Every TF2 LWB Kit needs a tough set or rock grabbing tires and the included Mud Thrashers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.

THE DETAILS

The Mojave Body Set includes add on windshield wipers, mirrors, marker light details and door handles for the ultimate in scale looks. Realistic dashboard decals come pre-installed.

The TF2 LWB Kit Mojave Body features new late model style square headlights, chrome bumpers and a redesigned shape of the classic 4x4 body style. The redesigned shape is more accurately proportioned and offers better details.

The TF2 LWB Kit Mojave Body Set includes a great dropped bed molded directly into the body. It’s perfect for carrying all you scale accessories or spare wheel and tire!

An industry first, the TF2 LWB Kit Mojave Body Set includes a bolt on, scale accurate molded cab back with every kit so you can use just the cab for a truggy style build.

The TF2 LWB Kit also includes all new scale rock rails plus front and rear tube rock guard bumpers. The front bumper has a winch mount built right in for an optional RC4WD winch!

What's Included:

1x Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set


This is a kit that requires building time (approx. 2-3 hours) and electronics.

Notes:

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws, otherwise you may strip the thread.
The Mojave II Four Door Body Set is comprised of high quality molded parts with hand modifications to achieve this new Four Door version. There may be some imperfections on the body that will easily be resolved with minor cosmetic work and painting of the body.


Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)


Body Kit

Modeling / Craft Knife
Body Reamer
Side Cutters
Instant Glue / Plastic Cement (preferably non-whitening)
Hex Drivers (1.5mm, 2mm)
Cross Phillips Screwdriver (Small)


Electronics

Motor (35t 45t or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (3 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
2x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) 6 cell NIMH, or Lipo battery
Charger (Consult your battery guide) Chargers


Replacements Parts:

Soft Steel Leaf Spring for Trail Finder 2 (Z-S0518)
Hammer Transfer Case (1.47/1) (Z-U0024)
Metal Drive Coupling for Trail Finder 2 (Z-S0599)
Yota Steering Links for Trail Finder 2 (Z-S0601)
R3 Scale 2 Speed Transmission (Z-U0025)
14t 32p Hardened Steel Pinion Gear (Z-S0430)
Fuel Cell Radio Box (Z-S0592)
Trail Finder 2 Plastic Body Posts (Z-B0029)
Leaf Spring Shackles & Mounts Kit (Z-S0047)
RC4WD Marlin Crawlers Front Plastic Tube Bumper for Trail Finder 2 (Z-S0594)
RC4WD Marlin Crawlers Rear Plastic Tube Bumper for Trail Finder 2 (Z-S0595)
M3 Offset Short Plastic Rod End (20x) (Z-S0401)
M3 Mini Plastic Rod End (20x) (Z-S0398)
Stamped Steel 1.55" Stock White Beadlock Wheel (Z-W0035)
Yota Ultimate Scale Cast Axle (Front) (Z-A0058)
Yota Ultimate Scale Cast Straight Axle (Rear) (Z-A0061)
Scale Nylon Long Punisher Shaft (104mm-150mm) 5mm Hole (Z-S0582)
Scale Nylon Short Punisher Shaft (89mm-120mm) 5mm Hole (Z-S0583)
Trail Finder 2 Bumper Mounts (Z-S0593)
Mud Thrashers 1.55" Scale Tires (Z-T0100)
Rear Shocks The Ultimate Scale Shocks 90mm (Silver) (Z-D0001)
Front Shocks The Ultimate Scale Shocks 70mm (Silver) (Z-D0004)
RC4WD Mojave II Four Door Front Cab (Primer Gray) (Z-B0120)
RC4WD Mojave II Four Door Clear Lexan Windshield (Z-B0121)
RC4WD Mojave II Four Door Rear Bed (Primer Gray) (Z-B0122)
RC4WD Mojave II Cab Back Panels and Grill Parts Tree (Primer Gray) (Z-B0074)
RC4WD Mojave II Chrome Bumper and Parts Tree (Z-B0076)
RC4WD Mojave II Clear Parts Tree (Z-B0078)
RC4WD Mojave II Dash and Wiper Parts Tree (Black) (Z-B0080)
RC4WD Mojave II Rubber Mirror (Z-B0082)
Heavy Duty Nylon Strap Lock (5) (Z-S0552)
Metal Shield Bearing 5x9x3mm (Z-S0841)
Yota Front Steel Axle Shaft (Z-S0060)
Yota 1/10 Axle Ring & Pinion Gears (Z-S0027)
RC4WD Marlin Crawlers Side Plastic Sliders for TF2 LWB (Z-S1730)
Mojave II Four Door Complete Body Set (Z-B0119)


Front:

King Off-Road Scale Dual Spring Shocks (70mm) (Z-D0037)
RC4WD 70mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0034)


Rear:

The Ultimate Scale Shocks 90mm (Silver) (Z-D0001)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
King Off-Road Scale Dual Spring Shocks (90mm) (Z-D0033)
RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0038)
The Ultimate Scale Shocks 90mm (Black) (Z-D0009)


Hopups:

Trail Finder 2 V8 Engine Mounts (Z-S1239)
RC4WD Bivouac 1/10 M.O.A.B Camping Trailer w/Tent (Z-H0007)
BigDog 1/10 Dual Axle Scale Boat Trailer (Z-H0006)
Steel Rear Bumper for RC4WD Trail Finder 2 (Style A) (VVV-C0208)
Steel Rear Bumper for RC4WD Trail Finder 2 (Style B) (VVV-C0212)
Rough Stuff Limited Edition Red Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round and IPF Square Lights) (VVV-C0215)
Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round Lights) (VVV-C0211)
Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella and IPF Round Lights) (VVV-C0209)
Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Double Hella Round Lights) (VVV-C0213)
Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Hella Round and IPF Square Lights) (VVV-C0219)
Rough Stuff Metal Front Bumper for RC4WD Trail Finder 2 (Standard) (VVV-C0206)
Front Lamp Lenses for RC4WD Mojave Body (VVV-C0205)
Scale Plastic Driver Figure (Z-S0190)
Winch (Winch options)
Rear 4 Link Kit (Z-S0603)
Front 3 Link w/Panhard Bar (Z-S0565)
XVD For Yota Front Axle (Z-S0342)
Scale Aisin/Yota Style Hubs (Z-S0196)
RC4WD Marlin Crawlers Front Steel Tube Bumper for Trail Finder 2 (Z-S0778)
Rear Machined Aluminum Bumper w/Hitch (Z-S0579)
Red Super Soft Leaf Springs (Z-S0570)
RC4WD Marlin Crawlers Rear Tube Bumper for Trail Finder 2 (Z-S0767)
Punisher Shaft (Z-S0209)
LED Basic Lighting System For Mojave Body Set (Z-E0016)
King 90mm Offroad Shocks (Rear) (Z-D0033)
RC4WD Superlift Superide 90mm Scale Shock Absorbers (Z-D0015)
RC4WD 90mm Old Man Emu Nitrocharger Sport Shock by ARB (Z-D0038)
K44 Scale Front Axle (Z-A0048)
K44 Scale Rear Axle (Z-A0049)


Items of Interest: (Not required for completion)

Paint for Body
Paint for Body Lenses (V-TAM81526, V-TAM81527)
Grease and Lubrication (Z-S0520)

RC4WD VVJD00002 1/12 Scale Earth Digger 4200XL Hydraulic Excavator (RTR) (Ve

1/12 Scale Earth Digger 4200XL Hydraulic Excavator (Ready to Run) (Version 1.5)
Earth Digger 4200 hydraulic excavator is the most powerful excavator available today, created for the customer who requires reliability and high production in bulk earth moving or construction projects. CNC machined metal parts, fully assembled, ready to dig! Massive power through 380KV brushless system.

Important Note: This product is for experienced R/C users. Not recommended if you just started with R/C.

Specifications:

100% CNC Machined Aluminum (except Track and Hydraulic Pump)
Custom 8 Channel 2.4Ghz radio
High Intensity Light (Super bright) (3 Watt)
Optimized Steel Hydraulic system
Scale operator station (can fit a driving figure and seat)
Steel Molded Tracks (50mm Width, 45 grade carbon Steel)
Efficient under carriage with Tracks
Reliable Hydraulic valve and Adjustable Pump
Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
Bearing based undercarriage design
Undercarriage rotate 360 degrees (Endless)
Powder coated in yellow
Massive brushless system (Hydraulic)
125A brushless ESC with BEC
350KV brushless monster torque motor (4130 OutRunner, 6mm Shaft)
Neodymium magnets
Belt/track is controlled individually
Run time is: 40-50 minutes (6500mAh battery)
Steel Machined Oil Pump (45mm X 30mm X 15.5mm)
Digging force: 15kg / 33pounds
Driving Speed: 310 Meter per hour
Scale: 1:12
Dig Depth: 495mm / 19.4inch
Height of Cabin: 155mm / 6.1inch
Length: 1.15meter / 45inch
Width: 250mm / 9.8inch
Height: 840mm / 33inch
Dead Weight: 20kg / 44lbs
Operating Oil Pressure: 20Bar, 290psi
Manufactured by JDCustoms
30 days limited warranty
Inside Cab Length: 4.72in / 120mm
Inside Cab Width: 2.55in / 65mm
Inside Cab Height: 5.31in / 135mm

This is version 1.5: (Current version)

What's Included:
1/12 JDCustoms Earth Digger 4200XL Hydraulic Excavator (RTR) (Version 1.5)


Replacement Parts:
Earth Digger 4200XL Oil Pump (VVV-S0005)
Earth Digger 4200XL Stock Excavator Bucket (VVV-S0008)
Earth Digger 4200XL High Voltage Brushless ESC (VVV-S0009)
Earth Digger 4200XL Excavator Brushless Motor (VVV-S0010)
Earth Digger 4200XL Excavator Brushed ESC (VVV-S0011)
Earth Digger 4200XL GearBox Motor (15 RPM) (VVV-S0012)
Earth Digger 4200XL GearBox Motor (27 RPM) (VVV-S0013)
Hydraulic Connector (angled 90deg) (VVV-S0015)
Hydraulic Connector (straight version) (VVV-S0016)
Ventilation Sealing Unit for Hydraulic Oil Tank (VVV-S0020)
Hydraulic Cylinder (172mm) (VVV-S0035)
Hydraulic Cylinder (180mm) (VVV-S0036)
Hydraulic Cylinder (210mm) (VVV-S0037)
Pressure Relief Valve for Earth Digger (VVV-S0041)
4mm Heavy Duty Hydraulic Tubing (VVV-S0103)
2.5mm Heavy Duty Hydraulic Tubing (VVV-S0039)
Earth Digger 4200XL Excavator Aluminum Track (V2) (VVV-S0123)
Hydraulic Connector M5 x 4mm Tube (90deg) (VVV-S0069)
Hydraulic M5 to M4 Straight Nozzle (VVV-S0075)
Replacement Radio for Earth Digger (VVV-S0024)
Hydraulic Valve Block (Version 1.5) (VVV-S0026)
1/12 Scale Earth Digger 4200XL Undercarriage (VVV-S0122)


Additional Parts Needed:
Lipo Charger
3S 6500mAh 11.1v 20c Lipo battery (Max size: 73mm X 80mm X 132mm) (Part # Z-E0038)
ESC support bullet connector
Optional Upgrade:

Earth Digger Version 1.5 Upgrade Kit (VVV-S0023)
Note: During operation, HID light might flash due to power drain.

Notes:

Fits Mobile DTE22 V22 Hydraulic Oil 16oz (VVV-S0111)
Warranty information

This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.

Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.

This Excavator is shipped without oil. You will have to fill the tank your self (half tank), by using a funnel or tube (not included).

RC4WD VVJD00015 1/14 Scale DXR2 Hydraulic Earth Dozer

Specifications:

Alloy Zinc and Alloy Aluminum Casting (except Track and Hydraulic Pump)
Weld Steel Bucket
9 Channel 2.4GHZ Radio
Heavy Duty Hoses (OD 3.2mm Nylon, ID 2.2mm)
Main Heavy Duty Hoses (OD 4mm Nylon, ID 2.5mm)
Optimized Steel Hydraulic System
Reliable Hydraulic Valve and Adjustable Pump
Brushless Hydraulic System
Full Metal Scale
All Terrain Metal Crawler
540 Brushed Monster Torque Motor
Full Metal Transmission (1:256 Gear Ratio)
Run Time is: 38 Minutes (5300mAh Battery)
Chrome Steel Oil Pump (47.5mm x 35mm x 36mm)
Bucket Capacity: 494949 mm_
Maximum Bucket Force (Down): 76kg / 167pounds
Maximum Bucket Force (Up): 50kg / 110pounds
Maximum Bucket Force (Thrust): 50kg / 110pounds
Driving Speed: 408 Meter Per hour
Scale: 1:14
Length: 27in / 685mm
Width: 13.8in / 351mm
Height: 12.7in / 323mm
Bucket Height: 6.87in / 174.6mm
Maximum Bucket Up and Down Angle: 29 degrees
Maximum Bucket Tilt Angle (Left and Right): 9 degrees
Maximum Ripper Depth of the Ground: 1.97in / 50mm
Total Mass Load: 37kg / 82LBs
Operating Oil Pressure: 25Bar, 362.5psi
Dead Weight: 26kg / 57LBs
Manufactured by JDCustoms
30 Days Limited Warranty

What's Included:
1x 1/14 Scale DXR2 Hydraulic Earth Dozer

Required Parts:
3S Lipo Battery
8x AA Batteries for Radio (Z-S1718)

Replacement Parts:
Earth Digger 4200XL Brushed ESC (VVV-S0011)
DXR2 Dozer Drive Motor and Gear Assembly Set (VVV-S0170)
DXR2 Dozer Tracks (VVV-S0166)

Optional Parts:
Semi Truck Sound Unit (VVV-S0074)
1/14 Scale DXR2 Hydraulic Earth Dozer Light System (VVV-S0173)
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Notes:

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
ESC Supports Bullet Connector
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.


Warranty Information:

This product is made for heavy duty usage. Since there is no plastic parts, its designed to last. But hydraulic pump, hoses and electronics system can break over time. Do not let the system overheat during usage. We will have all spare parts available for sell. Pump, hoses are electronics system is not covered under warranty, but we do guarantee fully functional at arrival. Each unit is full tested twice before we ship.

Each unit is professionally assembled, adjusted and tested. Do not adjust the oil pressure switch. Oil pressure will drop as you operate over time.

Specifications:

CNC Machined
Black, Silver and Red Anodized Finishes
Aluminum Alloy Construction
Operating Voltage: 11.1-12.4V
40A Brushless ESC
270° Action Arm Turning Angle
Maximum Lifting Force:
3KG / 6.6lb Maximum for the Longest Arm
3.8KG / 8.4lb Maximum After Folding the 6th Section of the Arm
4.8KG / 10.6lb Maximum After Folding the 5th Section of the Arm
6KG / 13.2lb Maximum After Folding the 4th Section of the Arm
Height after Folding: 11.8in / 300mm
Width of Front Feet: 7.5in / 190mm (Folded) 29.5in / 750mm (Extended)
Width of Rear Feet: 7.5in / 190mm (Folded) 16.3in / 415mm (Extended)
Maximum Lifting Radius: 35.4in / 900mm
Maximum Lifting Height: 742.91in / 1090mm
Hydraulic Pump: Power Flow 0.8L / MIN, Rate Pressure 2.5MPA
Total Weight: 176.4oz / 5000g (Including Packing Material)

What's Included:

1x 1/14 Truck Mounted Hydraulic Crane

Required to Complete:

Thread Locking Adhesives
Straight Screwdriver
Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers

Additional Parts Needed:

Lipo Charger (Z-E0047)
3S 6500mAh 11.1v 20c Lipo Battery (Max size: 73mm x 80mm x 132mm) (Z-E0038)
Mobile DTE22 V22 Hydraulic Oil 16oz (VVV-S0111)


Notes:

Fits Tamiya 1/14 King Hauler Tractor Truck Kit.
The hydraulic system uses #32 hydraulic oil.
Requires additional XT60 connectors for the battery.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
You will need a minimum of 5 channels for Crane Model and at least 9 channels for 1/14 Truck Model.
This can handle a 3 cell lipo.
General portion of truck may be used, but will require modifications.

Payment Information: Due to the value of this product, all orders must be paid with bank transfer. When you check out, do not choose credit card or PayPal as we will refund you. Make sure to select Bank Wire Transfer as your payment method instead. Feel free to email us at support@rc4wd.com for any questions.