Drucken

Rustler


Anzeige pro Seite
Sortieren nach
251 - 286 von 286 Ergebnissen
Artikel-Nr.: TRX-2575
"passt bei:Traxxas E-RevoTraxxas SlashTraxxas Revo "
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2576
"passt bei:Traxxas E-RevoTraxxas SlashTraxxas Revo "
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2577
"passt bei:Traxxas E-RevoTraxxas SlashTraxxas Revo "
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2578
passt bei:
Traxxas E-Revo
Traxxas Slash
Traxxas Revo
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2579
"passt bei:
Traxxas E-Revo
Traxxas Slash
Traxxas Revo "
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2580
passt bei:
Traxxas E-Revo
Traxxas Slash
Traxxas Revo
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2582
"passt bei:Traxxas E-RevoTraxxas SlashTraxxas Revo "
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2583
"passt bei:Traxxas Slash"
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2586
passt bei:
Traxxas E-Revo
Traxxas Slash
Traxxas Revo
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2591
passt bei:
Traxxas Slash
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2592
passt bei:
Traxxas Slash
statt UVP des Herstellers 3,95 €
3,56
Sie sparen 0,39 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-3932
passt bei:
Traxxas Slash
Traxxas Jato
Traxxas T-Maxx
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-3931
passt bei:
Traxxas Slash
Traxxas Rustler
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-3937
passt bei:
Traxxas E-Revo
Traxxas Slash
Traxxas Revo
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-3685
passt bei:
Traxxas Slash
Traxxas Rustler
statt UVP des Herstellers 2,95 €
2,65
Sie sparen 0,30 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-3642X
passt bei:
Traxxas Slash
statt UVP des Herstellers 3,95 €
3,56
Sie sparen 0,39 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-3343
Traxxas TRX-3343 Silikon-Kabel 12-Gauge

Grundpreis: 8,30 Euro/ m
statt UVP des Herstellers 6,95 €
6,26
Sie sparen 0,69 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-3340
passt bei:
Traxxas Slash
statt UVP des Herstellers 27,95 €
25,16
Sie sparen 2,79 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-3342
passt bei:
Traxxas Rustler
statt UVP des Herstellers 6,95 €
6,26
Sie sparen 0,69 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: TRX-2426
passt bei:
Traxxas Slash
statt UVP des Herstellers 3,95 €
3,56
Sie sparen 0,39 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: TRX-2431
passt bei:
Traxxas Slash
statt UVP des Herstellers 3,95 €
3,56
Sie sparen 0,39 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: JC-2086
When racing or bashing on a loamy or top soil track surface the inside of the Rustler chassis can become loaded with dirt or debris which creates extra weight. With the JConcepts over-tray these worries are minimized with the simple and functional over-tray. Fitting nicely under the body; the JConcepts over-tray hugs the outside dimension of the Rustler chassis protecting the inside from unwanted excess dirt and debris build-up during racing conditions. By minimizing resting surface area the void and protrusion free design is all about performance.

The over-tray is snug around the entire chassis structure while being attached with hook and loop tape around the sides and a slide-in fit in the front for easy access. The over-tray is built with extra height and rake to provide extra room for various electrical and battery configurations. The over-trays are designed for the stock Traxxas power and electrical or updated systems with compatible power.

Features:

•Original JConcepts simple design and function
•Durable clear polycarbonate material can be painted or wrapped
•Plenty of clearance for various electrical and battery configurations
•JConcepts - World Proven Innovation and Design

*over-tray shown is trimmed and mounted, actual part comes clear and untrimmed.

Revo®, JATO™, T-MAXX™, SLASH®, SLASH 4X4® etc. are trademarks and registered trademarks of Traxxas L.P.

statt UVP des Herstellers 24,99 €
23,43
Sie sparen 1,56 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Tage /08.10.

Artikel-Nr.: TRX-6511
Traxxas 6511 Link wireless module Bluetooth
statt UVP des Herstellers 44,95 €
40,46
Sie sparen 4,49 €

Bei uns auf Lager, sofort lieferbar.

Artikel-Nr.: RPM-70662
RPM 70662 Querlenker vorn - schwarz - breite Version TRX Rustler & Stampede (XL-5 & VXL)

Quick Notes:
- Available in Black, Green, Blue & Red
- fits all versions of the electric Rustler & electric Stampede 2wd
- See “Tech Notes” below for important fitment information

Product Description

Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. Our Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “Tech Notes” below) and bolt on a new set of rear wheels! It couldn’t be easier.

You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong!

Tech Notes: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here:

Rustler XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Rustler VXL: 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede VXL: 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

statt UVP des Herstellers 15,60 €
12,99
Sie sparen 2,61 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-70664
RPM 70664 Querlenker vorn - grün - breite Version TRX Rustler & Stampede (XL-5 & VXL)

Quick Notes:
- Available in Black, Green, Blue & Red
- fits all versions of the electric Rustler & electric Stampede 2wd
- See “Tech Notes” below for important fitment information

Product Description

Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. Our Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “Tech Notes” below) and bolt on a new set of rear wheels! It couldn’t be easier.

You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong!

Tech Notes: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here:

Rustler XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Rustler VXL: 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede VXL: 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).
statt UVP des Herstellers 15,60 €
12,99
Sie sparen 2,61 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-70665
RPM 70665 Querlenker vorn - blau - breite Version TRX Rustler & Stampede (XL-5 & VXL)

Quick Notes:
- Available in Black, Green, Blue & Red
- fits all versions of the electric Rustler & electric Stampede 2wd
- See “Tech Notes” below for important fitment information

Product Description

Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels out there almost 1-1/4” (31.8mm) of total width for some serious stability-adding performance. Our Wide Front A-arms extend the front width by exactly the difference in offset between the front and rear wheels. All you need to do is get a second set of “front” wheels and bolt them to the rear to align the front and rear tires and you’re good to go! No expensive prefabricated widening kits or time-consuming conversions. It’s as easy as replacing your stock A-arms with RPM wide A-arms, swap the turnbuckles and camber links for longer versions (not included see “Tech Notes” below) and bolt on a new set of rear wheels! It couldn’t be easier.

You already know RPM A-arms are the toughest molded a-arms in the R/C industry (gram for gram, stronger than aluminum as well)! Each RPM A-arm is molded from our trademark blend of nearly indestructible nylons and backed by our world-renowned limited lifetime warranty against breakage. RPM durability combined with RPM affordability; there’s no way you can go wrong!

Tech Notes: RPM wide A-arms for the Traxxas Rustler & Stampede 2wd fit all electric versions of these models, although additional parts (not included) are required for completion as listed here:

Rustler XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede XL-5: 1 - RPM Screw Kit #70680, 1 - Traxxas #3643 (long camber links), 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Rustler VXL: 1 - Traxxas #3643 (long camber links), 1 - Traxxas #3645 (long toe links) & 1 pair of front wheels (used to replace rear wheels).

Stampede VXL: 1 - Traxxas #2338 (long toe links) & 1 pair of front wheels (used to replace rear wheels).
statt UVP des Herstellers 15,60 €
12,99
Sie sparen 2,61 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-70680
RPM 70680 Schrauben-Kit für breite Querlenker-Version TRX Rustler & Stampede (XL-5)

Quick Notes:
- for use with RPM #70662, #70664 & #70665


Product Description

This kit is an easy and inexpensive option for bolting camber links (not included) and tie rods (not included) to your electric Rustler XL-5 or electric Stampede 2wd XL-5 when installing RPM Wide Front A-arm kits (RPM #70662, #70664 or #70665).

Tech Notes: Each kit includes 4 - M3 x 14mm button-head screws, 4 - M3 x 16mm button-head screws & 2 - M3 locknuts.
statt UVP des Herstellers 4,32 €
3,61
Sie sparen 0,71 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-73752
Quick Notes:
- replaces stock Traxxas #2530 & #2530A
- fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac)


Product Description

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.

Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.

We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.

Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!

Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4×4 versions of any of these vehicles.

* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
statt UVP des Herstellers 17,04 €
14,20
Sie sparen 2,84 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-73754
Quick Notes:
- replaces stock Traxxas #2530 & #2530A
- fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac)


Product Description

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.

Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.

We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.

Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!

Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4×4 versions of any of these vehicles.

* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
statt UVP des Herstellers 17,04 €
14,20
Sie sparen 2,84 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-73755
Quick Notes:
- replaces stock Traxxas #2530 & #2530A
- fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac)


Product Description

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.

Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.

We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.

Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!

Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4×4 versions of any of these vehicles.

* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
statt UVP des Herstellers 17,04 €
14,20
Sie sparen 2,84 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-73759
Quick Notes:
- replaces stock Traxxas #2530 & #2530A
- fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac)


Product Description

One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability.

Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments.

We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck.

Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM!

Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4×4 versions of any of these vehicles.

* Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed.
statt UVP des Herstellers 17,04 €
14,20
Sie sparen 2,84 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-80189
Quick Notes:
- fits 2wd versions of the electric Stampede & Rustler
- each A-arm is 7 grams lighter than stock!
- eliminates over 0.03” (0.8mm) of slop from the inner arm mount

Quick Links:
- available in Black, Green, Blue & Red
- matching Front A-arms also available


Product Description

RPM rear A-arms for the electric versions of the Traxxas Rustler & Stampede are stronger and more durable than stock versions, yet we’ve also managed to eliminate over 7 grams of weight per arm! That’s 14 grams of unsprung weight eliminated with a single pair of rear RPM A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams, or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions. Additionally, we’ve adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes (while the center hole remains in its stock location). While we were at it, we eliminated over 0.030” or 1/32” of slop from the inner arm mount and more than 0.010” or slightly less than 1/64” of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system.

RPM A-arms for the electric versions of the Traxxas Rustler & Stampede are molded in black, blue, green or red and are sold in pairs - 1 left rear and 1 right rear per package.
statt UVP des Herstellers 15,60 €
12,99
Sie sparen 2,61 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-80249
Quick Notes:
- fits all versions of the Traxxas Slash 2wd, Nitro Slash, electric Stampede 2wd & electric Rustler
- nearly 25% lighter than stock

Quick Links:
- available in Black, Green, Blue & Red
- matching Slash 2wd Rear A-arms also available
- matching electric Stampede 2wd & electric Rustler Rear A-arms also available


Product Description

RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some unwanted unsprung weight as well. RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty. Additionally, we’ve increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM #80372 & #80382).

RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.
statt UVP des Herstellers 15,60 €
12,99
Sie sparen 2,61 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-8 Wochen /08.10.

Artikel-Nr.: RPM-80529
Quick Notes:
- fits all versions of the Traxxas electric Rustler, electric Stampede 2wd, Bandit & Slash 2wd
- not recommended for spur gears larger than the stock 87 teeth

Quick Links:
- available in Black, Green, Blue & Red
- Gearbox Housings also available


Product Description

The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles.

Additional features designed into these gear covers include such important aspects as:

An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install.
Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter.
Sleek contours that would look great on any vehicle.
More clearance for larger pinions for owners hungry for speed.
Retains all stock geometry for easy bolt up; no cutting or gluing required.



Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris!

RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues.

Tech Notes: Not recommended for spur gears larger than the stock 87 teeth.
statt UVP des Herstellers 9,96 €
8,29
Sie sparen 1,67 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-81169
Quick Notes:
- fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler

Quick Links:
- available in Black, Green, Blue & Red

Product Description

Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc.!
statt UVP des Herstellers 9,96 €
8,29
Sie sparen 1,67 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

Artikel-Nr.: RPM-81269
Quick Notes:
- for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links

Quick Links:
- available in Black, Green or Red

Product Description

RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so you won’t ever have to replace another one. They are molded in black, green or red from our killer blend of nylons and are sold in a set of four, two front links and two rear links, enough for your entire vehicle. Get a set and end the frustration of broken camber links!

Tech Notes: Designed for use on e-Rustler & e-Stampede 2wd trucks that come stock with molded camber links. If your truck comes with adjustable turnbuckles, please consider our rod ends for Traxxas vehicles instead.
statt UVP des Herstellers 8,40 €
7,00
Sie sparen 1,40 €

Dieser Artikel wird auftragsbezogen für Sie bestellt.
voraussichtliche Lieferzeit vom Distributor (aktualisiert am): 2-6 Tage /08.10.

251 - 286 von 286 Ergebnissen